Skip to main content
Loading video...

3D Printed Upgrades I Printed This Month- October '25

Transcript 17:13

Hey everybody, this is Joey Evans and today we're back with a what I 3D printed this month. I say this month, but we're not going to we're trying to do as monthly as possible, but sometimes with travel and all that stuff. I don't get to use my 3D printer a lot. It's pretty sad. But uh before I get into what I 3D print, I got some really cool stuff that I did this month. Um there were some questions on on the last video, some comments on there. And please do comment if you guys have questions about different 3D printing things or if you have ideas of what you want me to print next. I love to see that kind of stuff because eventually I'm gonna run out of ideas. I just keep searching around. Um so before I get to that, um one person asked what printer I do have. Well, I have a Prussa 3KS is the sorry MKS. MK3S, that's what it is, but I don't use that one much. I have a Bamboo P1S. That's the one I really use primarily. It's very quick. It's very user friendly. You can use four different colors. Um, one thing Jacob mentioned in the comments as far as these different like different inserts.

One thing you can do is use different color filaments for different boxes. And that's a great idea. That's something I have not done yet is that way you know without looking at the picture which which layer goes in which box. You can also use different colors for different layers as well. So you have yellow on the bottom, orange on top, things like that. I think that's a great idea. And also, if you have like when you 3D print some of these things, one tip is after you do print, you might have these little strings on there. I know you've seen them a lot. And if you hit them with a heat gun, they said a torch or something like that. I have a heat gun or even a haird dryer would work. That just makes it's like magic. Those things just disappear. So, anyway, oh, and one other comment was on my unmatched storage cases. I have designed some storage cases for my unmatched and I think I've showed on Facebook. I might put a picture up here, but I have not uploaded those files yet, but I will if you guys want those. I can put those on Maker World or Thingiverse and stuff if you guys want to print those as well because Unmatched starts to become unwieldly with everything there if you don't have their nice storage container, which I do not. But, okay. Anyway, so today we've got a lot of different things. Um, first off is an insert, which I'll get to in a moment. And a lot of these, most of these come from Maker World, which is the bamboo with one, but you can use it for any printer. Mainly because that's probably the easiest for me to search on my phone. So, as I sit there on the couch or whatever, I'll scroll, type in my favorite game, and

see what shows up there. So, a lot of those are from there. I do have a couple from printables and things like that. But anyway, so let's get started on what I printed this month. Okay, so let's get started the insert because it's funny. These are probably the least fun, but the most useful. This is for Marvel Zombies. Marvel Zombies is another one of those games that takes up so many boxes. It's insane the amount of boxes. So, I wanted something that would combine all those boxes into a couple. Well, this one combines everything, the entire All-in Pledge into just three boxes. Mine is Galactus, of course. It It brings everything in Galactus except for Galactus himself, obviously, but Silver Surfer. Everything in there fits in this. So, this right here fits, like I said, into three boxes. And I love how the heroes go into this because they kind of slide into their shelves, and they stay secure in there. They don't slip. They don't roll around as you move it back and forth because the heroes are the ones you're going to spend a lot of time painting. So, you don't want those to kind of bump into each other and chip and all that. So, if you do paint them, this is a really, really good one on there, too. One thing they do mention is you can actually put name tags on there.

So, you can put name tags on the outside. You can see who it is at a glance without trying to figure out a lot of these more obscure heroes and things. I haven't done that yet in mine because they do say it takes a lot of time as far as add some time into setup and tear down because you take the name tag off, then you slide the hero out. So I but I will do that eventually because I think the payoff is worth it if it's very easy to see those at a glance. But one other thing is I will say too um this does work with sleeve cards and like I said the silver surfer can fit there in between or behind like Phoenix's wings. Um this one I don't have the a couple of them I don't have like a few of the art artist kind of sculpts or whatever like old man I think Hawkeye or whatever. So there like two or three I don't have but those have spaces for that as well. One thing I will say about the well two things that um I still I'm still happy with this but the different the different crew the grunts and all that type of stuff those don't slide in shelves. Those just sit in little circles down there. So if you turn your yours vertical those are going to slide out everywhere. So know that going in. If you do store vertical you're going to have to use some sort of magnetic thing. Put metal in the bottom whatever magnets in there. Have them stick down in there. For me it's not really worth it. I'm going to try to store mine horizontal for now. And another thing is this one does have a lot of lid lift. So, it was a lot more than I anticipated. So much to where when I built it, I'm like, that's really sticking out the top a lot. But, it does

does kind of crunch down that multiple multiple boxes into three. So, just know going in there are some little lift. So, I would get box bands in there if you go this route. But again, I put the link of this down there. It's printable. It's free. So, if you're looking to collapse Marvel Zombies, this is a good option. Okay. Next, before we get a lot of the board game thing, this is for for an RPG. This is for Dn D. I um printed this DN D spell slot tracker. That's one of the most difficult things with spell slots. I um sometimes when I play an RPG, I love when they go to mana where you have like 10 mana and whatever. It's like, oh, level three will cost you three mana or whatever. But there are spell slots in DVD and those can't sorry, Dn D and those can be a bit confusing. But this spell slot tracker is very nice. It just sits out there. It's it it you will put d a d6 in there.

It'll show you how many slots you have and you just rotate it down when you spend one. You could down from four to three or whatever. So you have how many of each spell you spell slot or spell level you have left. This makes it very easy, especially with newer players. My daughter is playing a spellcaster and she is eight going on nine. So, this really helps her know how many of each one she has going forward. And it's also a very easy print. This right here can be printed. It can I think it can also be printed, yeah, without an AMS with just color swapping along the top. Um AMS I keep mentioning that that is um a printer like the bamboo that will switch colors for you. But if you don't have that, if you want different colors, you can swap it out. This is a very quick, easy print. I printed a couple of these.

So, there's a couple designs. one D and D, one says I cast fireball or something. So anyway, this is a very cool, easy print. All right, and finally, this one my wife wanted me to print. We used to have a table topper um that we just love. We end up getting a game table, a specialmade game table a friend built for us, and it's fantastic. The one thing it does not have is those little card slots. I didn't use them as much, but apparently a lot of my friends, my wife, love those. So, this is just a large large playing card holder. It's a very quick print. Again, this is so if you don't want to hold your cards in your hand, you can put them into this. I've seen these made out of wood, whatever. This is fairly simple to print. Again, it's something that I don't really use that often, but I am surprised how many people actually do use this. And if you if you are using it, this is something to take a look.

And we've actually printed off, I think, six or seven of them. And we have little cubbies in our game table. So, those kind of get tucked in there. So, there's one at every station, at every place somebody sits. So if they want to use it, they just reach in that cubby, pull it out, and get to use it. So anyway, I got the link down there to two. This is the large plane card holder. Oh, and I almost forgot this one. This is another insert. And this just makes me happy about how quick these inserts came out. This game just came out. This is from Mike Delisio here at the studio. This is actually This insert is not from him, but this is I made you a mixtape. And this insert is already out. I think it just delivered a week ago. So I did print this. This is really new. And this is made to include the kind of the choose your own grooves expansion. I have not played um how to make your own mixtape yet or I made you a mixtape. But this right here, it's designed to hold sleeved cards, which I think is very important for inserts. If you do use a 3D printed insert, you should probably sleeve your cards because it really wrecks a card because there are some rough edges in a lot of these inserts.

So, if you're going to use one, sleeve your cards. But this is also made to where you can put labels on there that so it tells you exactly what is in each box. You can use whatever Avery labels or you actually use tape cassette labels it says in there which I don't even know if those exist anymore maybe. But I would just get labels and cut them down the size you need. Anyway, this is an insert for I made you a mixtape. All right. And this is one that I printed because I played this game and I thought this is very needed. This is for Arapa Mine. And a rapam mine has enough pieces for two people to look and because you're trying to figure out kind of a puzzle about the laser going through there and you're trying to piece it out and figure out where these different pieces go, but there's only two sets or of pieces there. This right here is a very easy print to print out more sets if you're if you want to play with more people. I've got enough for four people in my box, which is pretty nice because although you don't need them, I've written on there the grid. You kind of draw it. You put a Y for yellow, but then you have to erase and come back. If you've got those pieces, it makes life so much easier on that. So, and again, it's a very easy print. I love Arapa Space. Spoiler, but those are not available yet. But once the once they are, I definitely will get those.

Although, that has magnets, so I don't know how that's going to work. Anyway, um this is Aopa Mine. So, check out if you want some extra pieces, this is the place to do it. Make them yourself. All right. And this one, it's funny. I I don't know if I mentioned this before or not, but every time I play this game at retreats, which is a lot, people mention these. This is Wandering Towers. These are the towers for Wandering Towers. Man, you got to 3D print something or you got to buy them from Etsy or whatever. Oh, one thing I will say, somebody did mention in the comments. If you don't have a 3D printer, what to do? Well, you can order a lot of these things from Etsy or the designers, but there's also like libraries, things like that that you can go use a 3D printer. Anyway, so this is Wandering Towers, the towers for it. The ones we have are really nice, but they're painted. This This right here I found on Maker World.

This right here just prints and you can use them as is. And they're used they're two colors, too. So, these are really good. These 100% I think make the game more fun for me. Um I've printed other ones in the past that have to be painted, but these again you've got the raven on the top, the crest, so you can tell which ones are different. They do have to be glued together, which is fine. They they stack so easily when they're put together. You can stack them on top of each other. They are not they're a bit more stable than the cardboard ones anyway. And they also fit into the insert in the original box. So this is a huge step forward if you have wandering towers. If you have, honestly, this is the one that if you have a friend with a 3D printer, ask them to print you this. It's a very simple print. This will make your life and your gaming a lot easier, a lot more fun with Wandering Towers. So, anyway, these are the towers for Wandering Towers. Okay, so next is for a game Burgle Bros. This one I was working for a while on the three level um kind of well, three levels for Burgle Bros because it is, you know, bottom one, two, and three.

But then I played with it but and I'm stopping to print that for a bit because I'm not sure what I think about it. It does get kind of difficult to kind of the threedimensional thing is neat but I'm not sure how much I enjoy it in practical use. But the tokens in it are another thing. The tokens in this are great. They do these these remind me of the Geek Up bits which are really nice but they can be expensive. But if you have a 3D printer, why not do it yourself? So these look great. These they have they all have like there's also an insert that fits all these Geekup bits, but these look great comparing them to cardboard tokens. I mean, it's just a no-brainer. And they also have they have everything from the the log token. You've got all of these different tokens in there, the stairs, but you also have those more oneoff the miscellaneous ones, which are like the loot, the bombs, the birds, everything in there you've got in these tokens. So there you can choose whatever color you want. I tried to choose colors that match the main tokens as well as possible, but again, I wanted something different. I think I changed the color of the stairs or whatever. These just first off, they feel really nice. These print really, really well. So, definitely check those out if you like Burggo Bros. And if you don't like Burggo Bros, if you haven't played it, play it. It's really good. Surprising. I just played it at East again and I think that's what motivated me to play it again. So, anyway, that is the tokens for Burgle Bros. All right. I figure I'm going to put at least one dice tower in every episode because I work at the dice tower. No, I we actually have a lot of

dice towers in our house. I mean, before I started working here, right? My wife collects popcorn buckets and I collect dice towers. So, this is one that I printed because I just watched the movie this week for the eenth time. And this is the Back to the Future clock tower dice tower. It's pretty cool, man. I mean, it's first of all, I printed this thing in marble filament, so I don't have to paint it. I don't think I will paint it. And the clock prints separately, so you kind of can just super glue the clock on there. And you roll those dice down there. Comes right out. What am I going to use this for? I do not know. But I have a clock tower dice tower from Back to the Future. Let that sink in. It's pretty cool. 15-year-old me would be like, "Yeah, adulthood is pretty good." So, again, this is a very simple print. Again, there's no supports on this. I think it printed like three pieces or whatever.

So, no supports this print. It goes together so quickly and you can scale it up. If you want to roll larger dice out of it, but keep in mind, you scale something up. You would think if it's 150% bigger, it'll take 150% as long. That is not true with 3D printing. that will multiply the time. Anyway, I think this works great as is. But anyway, this is the Dice Tower from Back to the Future. All right, and finally, there's another game that I have so many things I want to print with it, but I just printed one recently, and I'm excited to use that in there, and that is from Heat. So, Heat I've got, man, I want to I want to print some gear shifts and all this, but this is the finish line from Heat. This is not needed, but it is great to have. This one right here, it finishes the whole race look. So on one side it says finish, the other side it says start, right? So you also print it finish and finish if you just want to put on there after you start. But what's cool about this too is it has a counter on the top. That's a little dial that you can reach up there and then just change the number as you pass through.

If you ever do wonder what lap you're on, this is the way to do it. And again, it just adds that 3D element to Heat, which heat is such a good game. the more you can add to it. Gives you that feel of being in the race. And again, simple print. This prints in I I guess three pieces. Front, the back, and then the little little counter, which really there are pegs. You put the put the counter in there. Pegs, collapse it together, and I don't think I even glued mine. It just snaps right there together. It's great. So, anyway, this is if you like heat, try this one. It's the finish line. Okay. So, that is several things. That's not everything I printed. I'm going to save some for next time when I finally get them kind of touched up and stuff. So, that's what I 3D printed uh this month. But, if you have other things that you are looking to 3D print or things that you have printed for your games, man, I love to see them because again, I do that doom scroll. I just keep going down that rabbit hole looking for everything on the app. So, if you have stuff that you like, even for older games, newer games, whatever, because if you can bling out your games with with your 3D printer, definitely let me know. If you have any questions about 3D printing, put those down there, too, because I will answer that because I think these I think the hobby as it grows, I think 3D printing is going to be it's going to be a great asset we can use going forward. So, anyway, hope you enjoyed this. Again, put those comments below. I'm Joy Evans and I'll see you later on the channel.

Hey folks, thanks for joining us for that video. So, if you haven't yet, like the video, subscribe to the channel, and hey, make sure you check out what's happening where I'll cover an app on an iOS or a Switch device, and you can check it out along with me. Thanks very much. You've been watching the Dice Tower.

Progress saved