Skip to main content
Loading video...

Paint Skaventide Clan Rats FAST & EASY

Transcript 11:51

in this video The scaven Tide is upon me and I have a lot of Clan rats to paint fast I got a copy of the scaven tide box set you know for Warhammer age of Sigmar fourth edition uh sent to me from Games Workshop some time back month and a half or so and it's got a lot of models in it right like two forces stormcast eternals and the scaven they're pretty good models and are you know mostly push fit and they go together pretty easily and just like the Warhammer 40K Leviathan box last year a portion of the models for each side in this box can make two separate age of Sigmar spearheads one for each Force spearhead if you don't know it's kind of like combat Patrol but for age of Sigmar it's smaller armies played on a much smaller board I decided I wanted to do the scaven spearhead in comparison to the storm Bros which just don't really grab my attention for some reason now that said it's still a pretty decent number of models in that particular group there's a leader on like a weird rat horse thing I don't know and a graer an engineer uh three rat ogres and then two squads of 10 Clan rats each that is that's a lot of models in that spearhead it's 26 total in the entire group to me

that's a lot of models the last combat Patrol that I painted was only 10 models it's the old Dark Angels combat Patrol that had the redemptor dread knot in it all that kind of stuff you know so I kind of figured I was going to want to get through this whole group of models very quickly and I knew just how I was going to do it with the clan rats now to begin I didn't film any of the beginning I don't know why exactly I probably should have you know I started by obviously building the clan rats and they go together very simply they're pushfit most of them are two parts um maybe there was a couple that might have been three but I think only it was mostly two-part models and they were pretty easy to get together right uh so then after they were built and then you know I put them on the bases and I put the basing texture on again more stuff I didn't film I then primed them black which I also didn't film uh with my airbrush then I airbrushed them a color called Oak Brown from the Army painter air colors and I did a pretty extreme zenithal right and I don't mean I put it on really really heavy I mean with a zenial you usually leave some shadows and stuff like that I barely left any Shadows there's a little bit of black primer and some of the you know deepest recesses but predominantly those models were all Oak Brown and then after that I gave them kind of a more normal zenithal from above with army painter air bleached bone right this gave them like a decent normal looking kind of zenithal for painting over with transparent colors but it was a warmer zenithal instead of a straight white over black it was

instead more like Ivory over Brown after I left the airbrush it was then time to sit down and put on some very quick skin tones I used Army painter fleshwash soft tone and strong tones and I pretty much just slopped it onto the skin Parts like the head and the face the arms the feet that kind of stuff I'd paint them all with different tones so that they didn't all have exactly the SK you know the same skin colors some guys I would use flesh tone and some of them I would use the strong and some I would use the the soft tone it just kind of helps break up the group of them so they don't all look boring and syy right I mean not too much uh as those parts dried I mixed two drops of army painter speed paint Crusader flesh with one drop of speed paint princess pink and then I I used that color uh basically on everybody's tails to give them that kind of you know pink kind of rat tail thing going on it's still a little bright at this point but we're going to fix that later I then worked on the base colors for their kind of wooden Shields and their weapon halfs or staffs or whatever you know and for me it's predominantly almost always Army painters speed paint dark wood for that kind of stuff you could use some other colors for the base of the wood bits if you wanted to sort of vary things up a little bit more if you wanted to take that time but it's totally up to you again I'm trying to get through all these Clan rats as quickly as possible so you know I could VAR the colors later with washes or different types of dry

brush colors if I wanted to but for the base I'm sticking with that that dark wood it depends on you know what you like and what kind of schedule you're on I suppose these Clan rats are mostly covered in rags and I wanted you know their rags to have some color cohesion but not be all the exact same colors right you know I assume most gave even find the materials that become their clothes and you know maybe they can dye those things in different colors with like who knows what kind of probably not anything good but like the whole group wearing the exact same colors didn't sound right to me so I picked a bunch of different kind of greenish speed paints Gilly dooo Charming chartreuse and Camo cloak to sort of tweak some of these colors I also threw in some rigor mortise and some desolate Brown you know for mixing with those previous colors after I got those parts done and let them dry I then started working on the other parts of the rags some of the figures look like they're kind of dressing in layers you know for fashion and I wanted to pick another color that would work together with the greenish tones that I'd already used but also be noticeably different as well I went with Browns like Army painter speed paints bony matter pet bones and ochre clay and sometimes I mixed in a bit of soft tone or strong tone wash to vary the colors as well with all the different parts of the rags you know done in different colors but now done and dry it was now time to base coat all the parts that

were going to be metal I always like to lay down a layer of army painters speed paint Grim black before I put down the silver metallics then any parts or crevices that I might miss with the silver will then be black Shadows you know instead of like light colored gaps in the paint I started with the chain mail bits because they got those little holes amongst all the chain mail and that definitely needs to be black for later and then I did the armor plates you know for the ones that have armor not everybody you know has armor in this group and then of course all the weapon blades as well at this point it's now time for the juice the Marine juice that is if you haven't heard of marine juice it is a unifying wash popularized by Sonic Sledgehammer here on YouTube it's uh he says he got it from uh some people that used to work at Forge World and it was a mixture that they mixed up to paint over Horus heresy Marines when they had to do a whole bunch of them right it's basically a mix of two different washes usually like a dark color like a dark tone and like a flesh wash and then also some medium to help thin it so it's not so dark and there's all kinds of different types and recipes that sledges talked about on his channel pachow you should definitely subscribe and this is the the one that I've been using here now for about a year I keep it in a big bottle and you just take it and just sort of brush it over everything and make make sure not to let it pull too much in any crevices or folds and pants and stuff like that if it does just

redistribute it with your brush after everything's dry I like to dry brush some Army painter fanatic paratrooper Tan on like the scaven faces to really pop out that detail some more because there's a lot of detail going on in those face it's a brown that a lightish brown that seems to maybe have just a touch of peach color added to it and it just works really well with scaven faces in my opinion then I use Army painter fanatic leather brown dry brushed on the Shields and the wooden hals of the weapons and all that kind of stuff to make that sculpted grain really pop again you could use several different dry brush colors here to make things look different like different Shields different wood whatever or maybe just throw a wash over certain of them uh you know the Shields and the weapons or whatever afterwards to make the metallic Parts look well you know metallic I then dry brush Army painter fanatic shining silver onto the little chain mail parts that are sticking out underneath the rags right like they just need a little bit of a dry brush and in this situation you're going to need a pretty skinny dry brush to get into these parts I wouldn't use a makeup brush here honestly I'd probably use like a purpose-made brush for Miniatures but with like a chisel tip kind of dry brush here I'm using the Army painter small dry brush and it fits perfectly in these areas finally we're on to the bigger metal Parts as I said earlier some scen wear plate armor and you know they all pretty much carry

weapons so we'll use the amazing army painter speed paint metallics polished silver to paint these parts if you haven't tried the metallic speed paints yet they're kind of like nothing else they're like incredibly fluid but they cover really really well in one coat and they also don't leave any brush Strokes just a very quick swipe of the polished silver color over the armor and the blades and your metals are sorted at this point you're basically done well except for the basing and you know the painting of the rims of course uh but but once you do that these rats are ready for the tabletop and they will look fine now could you you know put a little bit of soft tone wash on the metallics to make them look a little rusty sure yeah you could and I did here could you also put a little bit of dark tone wash in the mouths to darken them up and then add a little bit of like Ivory kind of bleached bone or something like that paint to the teeth as well if you wanted to sure you could and I did could you also paint the eyes yes but I I I didn't I I really wasn't interested speed painting is about planning ahead cutting some Corners that you're okay with and also the old adage of quantity over quality usually right when you have a lot of rats to paint or honestly anything else don't spend golden demon effort on each one or you'll never get done done not including like the building and the priming and the zenial these four scaven took me about three

three and a half hours and I was filming along as I was doing it if I had just been like head down listening to an audiobook and working I bet these four would have taken me less than 3 hours maybe even closer to two are you looking forward to painting a whole bunch of Clan rats in a few weeks or maybe you're going to get into the like stormcast half of the scaven tide box should I make a how to speed paint stormcast video I have some ideas let me know down in the comments below I hope you enjoyed this tutorial and maybe you know you can share it with your friends who play scaven that'd be pretty cool also if you liked this video or just like it when I do tutorials in general then you know please hit the like button it helps me and the channel get out to more people subscribe to see videos like this every single Friday and thanks for watching hey

Progress saved