Class of '89 - How To Play
Transcript
Hi and welcome to Watch It Played. My name is Rodney Smith and in this video we're going to learn the one to four player game class of 89 designed by Corey Jordan and published by Patterson Games who helped sponsor this video. As a member of Hillview High's graduating class of 89, you're going to make sure your school's yearbook showcases your friends, the teachers, staff, and all the key moments from your times together. Your fellow students are counting on you to capture the best memories. So, join me at the table and let's learn how to play. To set up, put this school mat in the center of the play area with this round track above it and the round marker set into the first space. And then add this school entrance to the area here nearby.
Also put this club track and club objectives board. Flipping this to the side for your number of players. This is the side for four. But we'll assume we have two players in this video and use this side which is for three and two player games. The cards with these backs represent the six different categories of club objectives. When you go through them by their faces, you'll find that each are labeled either A, B, C, or D. For your first game, they recommend using the A card from each of the categories known as the A set, which you then put face up onto the matching colored spaces for them here on the club objectives board. In future games, you can try using set B, then C, and so on. When you're familiar with the game, you can instead shuffle each category separately and draw one card randomly from each for the objectives board.
Next, within reach of the players, create a supply of these five different types of attribute tokens and these signature tokens. You'll find five different groups of differently shaped pieces known as the Wildcat Way tiles, which are named after the school's mascot. and you'll organize these by shape into face down shuffled stacks. Then find and organize by their backs the three decks of cards known as students, teachers, and staff, which you shuffle separately. On the school mat, you'll find spaces for wild cat way tiles and cards, each labeled for what belongs in them. So, you'll now draw from those related stacks and decks to fill each spot with the required component, adding them face up. As an example, a teacher goes here. A wildcat way tile labeled C goes here. And three students are dealt face up into these spots. Some tile spaces show a double outlined area because the tiles in their stacks may either have a horizontal alignment or a vertical one. You still only draw one tile for these spots, but ensure whichever one you've drawn is placed upright. If a tile you add to the mat is labeled as senior superlatives, like we see here, immediately draw the top card of the student deck and add it face up in the tiles area for it here.
The school mat is divided into five colored locations, each with a name and what is known as a club symbol. The locations also contain three circular spaces showing zero, one, or two signatures. If you have a game with two or three players, you'll need to add some tokens into some of these spots. Do this by first finding these janitor tokens, which show a different club symbol on their face, and then this janitor symbol on their back. You'll mix them face down, and then reveal a certain number of them based on your number of players, as shown here in the rule book and on screen. The number of circles is how many of these tokens you'll have to use. So, all five in a two-player game like we're setting up.
Flip one of the tokens randomly face up and then find its club symbol on the board. The first janitor setup icon is blank. So, we add this token to the blank space here. Now, we flip a second token. This shows the matching club here. And the second token on our guide is also blank. So, this also goes into the blank space of this location. The third token we flip matches this club, but our guide now shows a single signature for the third token. So, we put it in the spot with a single signature. We then do this for the remaining two tokens, adding them to the related clubs and onto the indicated spaces based on the number of signatures showing in the setup. Once all the janitor tokens have been placed, you can flip them face down so the janitor symbol is showing again. If you had three players, you would only use three random janitor tokens, but added the same way, filling in three of the spaces. Now, give each person one of these yearbook boards, four team members, and six club pin markers in their chosen color, along with one of these ABC tokens, and a player aid.
Next, each person puts one of their pin markers into an empty space in the bottom row of each club category of the club track board. Now deal everyone randomly one of these column completion tiles set with either side face up below the left side of their board here. The sides are different and which one you might want to pick will make more sense once we know more of the rules. Now the person who graduated from high school closest to 1989 is given this first player token. If there's a tie, the player who had the biggest hairdo in their senior yearbook gets the token. or you can just choose someone randomly using this chart found in the rule book and here on screen. Now give each person a certain number of these signature tokens beginning with the first player and then going clockwise around the table. So in our two-player game, the first person gets one token and the other player will get two. Add your signatures to this space of your yearbook board. Then deal each person two teachers and three student cards.
They each privately pick one teacher and two students to keep. The chosen teacher must be placed face up on this space of their board and the two students can be added to any of the other empty spaces. There are rules for how students can be placed and reasons some spots might be better than others, but we'll learn about that later. Either way, the student and teacher not chosen by the players are returned to the bottom of their related decks. Then ensure your ABC token is set into the space for it here on your board. And that's the setup. In class of 89, you and the other players are each responsible for filling two pages of your high school yearbook. You'll each have your own team members to send around the school to get photos, write articles, and prepare your two-page spread so that in the end, you'll have earned the best reputation for the layout you created. Now, before we get into the main rules, I think it would be helpful to take a quick tour of some of the elements of the game. As we saw, the school mat is divided into five main sections along with a sixth area on this tile. And each of these are known as locations. They have a name in the area here. So, we have the office, library, hallway, auditorium, gym, and school entrance. Each location also has an associated club listed under its name. For example, the library location hosts the quiz bowl club and the hallway
location is where you'll find the pep squad club. Each club also has a related symbol. For example, the quiz bowl has a book and the pep squad has this megaphone. You also have your yearbook board. On the left side, you'll find spaces to put teachers and student cards you collect. And on the right, you'll have spaces to add these wildcat way tiles along with staff cards. Filling these two main areas will give you various benefits and will help you score points at the end of the game. As we'll see, the game is played over four rounds, and during each round, players will take turns starting with the first player and then going clockwise around and around the table. And on your turn, you'll add one of your unplaced team members to a location. These are your team members, and each player has the same four different types as indicated by their symbols. They're known as your editor, designer, photographer, and treasurer. They each have a unique ability, which we'll learn about later, but they're all used the same way. So, we'll go over how they're used first. To use a team member, move it to any one of the empty circle spaces of a location.
This means you cannot go into a space with a janitor token or a team member, yours or another players. So, if I wanted to go to the auditorium, I would have to place it into this space. You also cannot add one of your pieces to a location that already contains one of your other team members. So, if I had a team member in the auditorium, on a future turn when I'm placing a different team member, I could not go into the auditorium. I would have to go to one of the other locations. When adding a team member to a space, you must spend the number of signature tokens that are showing within that space, either zero, one, or two. So, if I wanted to go into this space, I would have to spend one signature token. You take these from this area of your board and return them to the supply. [snorts] If you do not have the required signatures, then you cannot put a team member on the related space. If you're unable to put a team member in any of the locations on the school mat because there isn't a valid space or you cannot afford the signature costs, then you'll move that team member to this school entrance area and any number of pieces can be added here. So unlike these other locations, if you already have a team member in the school entrance, you can put another team member there on a future turn. After placing a team member, you then resolve up to three possible actions. One option is known as your main action, and it is
mandatory. So let's see how it works. With this action, you collect any one card or tile from the location you put your team member in. After picking something to collect, you must add it to your yearbook board right away. So, let's learn how to place students. Each student will have a first name in the area here along with the first letter of their last name. That last name letter is the most important element when placing a student. Students are added to the spaces of this class photo side of your yearbook. And over the course of the game, you'll add both students and teachers here. You can identify teachers because they have a white border around their outside edge. Students must be placed so that they're in alphabetical order based on the large capital letter of their last name. And the alphabetical order wraps from the right side of each row over to the left side of the next one. So I could place this student into this space since K comes after C and before O. And you can leave any number of spaces between students. So I could have added it to this space or this one instead. If I was adding this student later with the last name letter of U, I could not put it in this space because although U comes after C, it does not come before K. I [snorts] could however put it in any one of these spaces since U comes after O. If you have students
with the same letter for their last name, they can be put beside each other or you can leave a gap if you want. But either way, you do not have to organize them alphabetically by their first names. So this student could be added to this side or the other of this one. Just know once you place a student in your yearbook, you cannot move it later. Now, I should mention each person begins the game with one of these ABC tokens. And once per game, you can use this to add a student to your yearbook, ignoring the usual alphabetical requirements. To do this, add a student you collected to any empty space and then put this token over the letter of the last name. This will allow you to add the student to any space and ignore its last name letter.
Just be aware if you're unable to place a student in alphabetical order and do not want to use your ABC token or do not have one to use, then you cannot collect that student from the school mat and must choose a different option. For example, I could not take this L student because in a case like this, they would need to go between these students and there's no room. However, this is where gathering teachers can be helpful. Remember, when you add a team member to a location, you can collect any one item there, which could include a teacher. Teachers, like students, are added to any empty space on this side of your board and cannot be moved once they've been added. That said, for the rest of this video, I'm going to be freely adding and removing cards and tiles to and from the yearbook boards in order to create the examples I want to show you.
All students to the right of a teacher and continuing to each row below it are considered part of that teacher's class. We started the game with a teacher here. So all of these students are part of their class. When you add a new teacher, you create a new class made up of all the students to its right. Even students that had already been placed on the board. So this student which was originally part of this class is now part of this teacher's class. Remember students must be placed in alphabetical order. But you only compare students within the same class. This means we ignore all the student names to the left and above this teacher and start a new alphabetical order to its right and below. So I could add this student here later. This one could go here and then maybe this one here and so on. Classes can be any size, including zero, which would happen if we put this teacher here. Teachers will provide ways to score points at the end of the game based on the students within their class, which we'll learn about later.
But for now, I want to explain these symbols found in the bottom right hand corner of teacher cards and to the left and right of all students. They're each known as half icons, which match the symbols we saw earlier for the various clubs at the high school. When putting students and or teachers directly beside one another, these icons do not have to match the ones they're adjacent to. But when they do match, you'll gain a benefit. And keep in mind, cards added to the end of a row are considered directly adjacent to any placed at the very start of the next one below it. So, these symbols would match. Anytime you create a match, you note the pair of club symbols you've put together and then move your colored pin one space up on the related club track of this board that shows that same symbol. Anytime you advance a pin, immediately take the bonus showing to the left of that row.
This is the symbol for gaining a signature token. So, we collect one from the supply and add it to this area of our board. And there's no limit to how many signatures you can have stored here. The benefits of the other rewards you'll find on the other rows of this board will be explained as we encounter them later. Going back to our class photo area. As soon as you fill a row and or column with cards, you gain the related bonuses shown in the areas here for that row or column. For example, if we filled this column, we see a symbol that represents a student card and has an exclamation mark. Those symbols together mean we immediately gain any one face up student from the school mat to add to our yearbook. And the student does not have to come from the same location you placed your team member in.
If a reward you would gain shows these symbols, this represents a teacher card and lets you collect any one face up teacher from anywhere on the school mat to add to your yearbook. And I should just mention, if you're ever unable to legally place a card reward you could gain, you simply lose that related bonus. Once we complete a row that has this student card symbol showing a three, a slash, and a one. That means you draw three students from the top of the deck, examine them and pick one of them to keep, adding it immediately to your yearbook board and putting the rest unseen at the bottom of the student deck. If you have no legal place to put the student card that you picked in this situation, then you would have to put it into a face up discard area beside its deck. If a deck ever runs out during the game, reshuffle its discard pile into a new deck and keep drawing any cards you were owed. Sometimes a reward you gain will show one or more of these attribute icons, which means you collect the related tokens from the supply. For example, completing this row means we gain a bolt and paint attribute token.
These attribute tokens represent the traits and preferences of the students in your yearbook. Anytime you gain an attribute token, you either add it to a student in your yearbook or put it in your token storage area here. As this reminds you, you may only store at most two attribute tokens in this area at a time. If you do not have a student you can or want to add a token to and do not have room in your storage for it, then return that token to the supply. That said, at any point during your turn, you can move tokens from your storage to students in your yearbook, and each student can have at most four tokens placed on them, which can include several of the same token. As we'll see later, you'll score points based on the attributes you put on your students. So, collecting and assigning them wisely is very important. Once you add an attribute to a student, you cannot freely move it later. But as it shows here, at any point during your turn, you may pay two signature tokens, returning them to the supply to move an attribute from one student to any other, ensuring you do not exceed their four token limit. Again, we'll see why you might want to add certain attributes to certain students later, but just be aware, signatures and attribute tokens are meant to be unlimited. If you would ever run out of any of them, just use a suitable replacement. I'll also point out these other column rewards quickly.
This would gain you three signature tokens from the supply. And anytime you see club symbols with an up arrow, you go up one row on the related club tracks. So the student council and athletic clubs in this case, you'll remember these are found here on this board where you gain the reward of each row you advance to. Speaking of which, we've now also learned what the rewards on the third and fifth row represent. They gain you the related attribute tokens. If you see this symbol as a reward, it means you gain any one attribute token of your choosing. You'll find reminders of what the symbols in the game represent here on your player aid. So, be sure to refer to it while playing. All right, we've now learned about collecting students and teachers, but after placing one of your team members, you might instead collect a staff card, which always has a black border. You put these into any one of the spaces for them here on the far right of your yearbook, and then you immediately gain the rewards showing at their bottom. For example, this would gain me one signature and two bookmark attribute tokens, and then I'd go up once on the quiz bowl club track. I'll point out if you're already at the top of one of these club tracks and you would gain the benefit of advancing again, just leave your marker where it is and gain a signature token for each time you would advance but cannot advance further. Okay, moving on. When placing a team member at a location,
instead of collecting a card, you might take the tile there. No matter their shape, these are all known as wildcat way tiles. And when collected, they must immediately be put into empty spaces of this grid on the right side of your yearbook board. A tile can be put anywhere that aligns with the grid spaces, but must be placed so that it's in the correct orientation for reading. You cannot rotate them. They must be placed upright. Newly added tiles do not need to touch other ones. Just make sure they never overlap other tiles or go outside of the grid itself. If you cannot fit a tile within the free spaces of your grid, you cannot take that tile and must pick something else to take from the school mat with your team member. Some staff cards and advancing to this row on the different club tracks will provide you with this symbol as a reward. This means you gain one of those tiles from the supply and flip it face up, adding it just like any tile you'd collect from the school map. If you ever don't have room to place one of these in your grid or you do not want to place a tile, just return it to the supply instead. When you add a tile to your grid, you gain the benefits of any symbols you cover with it, along with any rewards printed along its bottom, and you can resolve these in any order.
Some tiles provide you with points which are represented by this symbol and you resolve those at the end of the game as we'll see. When you fully cover one half of the grid, you also gain the rewards showing by that related half. These for covering the top half, these for covering the bottom, these for the left, and these for the right. Each will cause you to go up on a particular club track and provide you with two points at the end of the game. Some tiles you collect are known as senior superlatives, and they always have a student card on them that travels with the tile to your grid and will stay there. You never move these students to your class photo section. That said, when gaining attribute tokens, these can be added to these students just like any others, and that can earn you points at the end of the game, as we'll see. With that, we've covered the benefits of visiting the different locations on the school map.
But Yolva member, if you cannot add a team member to an available space or you do not want to, you can assign it to the school entrance instead. Unlike the other locations which can only have one of your team members in each one, any number of any players team members can be added here. And a team member put on the school entrance immediately gains two signature tokens and a single one of these Wildway tiles. If you have experienced players at the table, you can choose to remove the school entrance from the game. This just means that if you do not have a valid spot to put a team member on during your turn, your turn will be skipped for the rest of that round. Okay, we've now seen all the ways your team members can be assigned and how to resolve collecting cards and tiles. But on your turn, you can also perform a signature action. A reminder of this is shown within each location here and simply means that you may spend one signature token after putting a team member in a location to gain the related attribute token or to resolve this symbol, which means you discard all of the cards and tiles in that location and then refill every empty space there afterwards with cards and tiles drawn from the related stacks. Just note you can only perform a single signature action on a turn. So you could not spend two signatures to do both at once. If you assigned a team member to the school
entrance, its signature action is shown here and allows you to spend one signature token to gain any one attribute token. All right, so we now know that in general all your team members are used in exactly the same way. You put them in locations and then gain a card or tile. But each also has its own unique action it can perform. This is your editor. When put in a location, its unique action allows you to go up one row of its related club track. So going here would advance me in the pep squad club. If you assign your editor to the school entrance, you go up on the honor society club track. Here we have your designer. When you visit a location with this team member, you gain a signature token and one attribute token of the type shown in this area. If you assign the designer to the school entrance, you can take any one attribute token of your choice along with the signature token. Here we have your photographer. When assigned to a location, it allows you to collect a student card from there in addition to the usual tile or card you also get to collect as your main action. Finally, we have your treasurer. You'll remember you cannot normally add a team member to a location that already has one of your team members, but this piece ignores that rule. It can also be assigned to a location that does not already have one of your pieces. But either way, it also
ignores any signature costs showing in the space it goes into. So, if I put this here, I would not have to pay the two signature tokens. You'll find a reminder of each of your team members unique actions here on your player aid. All right, with that, we can now summarize a player's turn. You pick a team member from in front of yourself and put it into an empty space of a location, paying any signature tokens that are required. Then you perform up to three actions in any order. You must resolve a main action, which is taking a card or tile from the location your team member went to, adding it to your yearbook. You may also perform a signature action, which is spending a single signature to either gain an attribute token or replace the cards and tiles in your team member's location.
And you may perform the special action of the team member you used. And again, you can resolve those actions in any order. After resolving your turn, the next person in clockwise order takes their turn. and around and around the table you'll go until each person has used three of their team members. In this way, you'll always have one team member you did not use. And then it's time for the end of the round. You'll find a reminder of its steps here on this side of your player aid. But let's go through them together. First, check the club tracks and the player highest on each one will choose to either gain a signature token or the attribute token associated with that club. The person highest on the honor society track, which does not have an associated attribute, can instead take a signature token or any one of the attribute token types. If multiple players are tied for being highest on any of the tracks, then no player gets a reward for those clubs.
Next, each player takes back all of their team members from the school locations, putting them in front of themselves again. Then you refill any empty spaces on the school mat with cards and/or tiles from their related stacks. Remember, anytime you add a senior superlatives tile to the mat, you also draw a student card from the deck to put on top of it. If you had just finished the end of the second round, then the symbol here means that you first remove every card and tile still on the school mat and then refill all of the spaces. Either way, if you have a two or three player game, you'll now move each janitor token on the mat to the same type of space it had been on, but in the next location over to its right. So, I would move this one, which is on a space with no signature, to the next space over that also has no signature. Then this one, which is on a space with one signature, would move here to this space with one signature.
And then this one with no signature would wrap all the way around going into this space and then continuing until each of the janitor tokens have been moved. Now, pass the first player token to the next person clockwise. Unless you have a two-player game like we do here, in which case it will stay with the original first player for the second round as well and then be passed to the other player at the end of the second round. And then that player will keep it for rounds three and four. Once all of these steps have been completed, you then advance the round tracker one space. If this marker was on the fourth space at the end of a round, then after players gain bonuses for being highest on each of the club tracks, you skip the other end of round steps and go right to final scoring. For this, grab one of the included score sheets, putting each person's name at the top and filling out their scores for all of these rows, starting with the club objectives. These were put on this board during setup and each have a condition you must meet in order to potentially score points from them. For example, this one rewards players for having the most students within a single class that have this GAVL attribute token assigned to them.
Notice the word student is bolded. That means you're counting the number of students within a class that have at least one of these gavl attributes, not the number of those attribute tokens that are within the class. Also, to qualify for any objective, you must meet its minimum requirement shown here. In this case, having at least three students with the gavvel attribute. [snorts] These numbers here are related to the solo mode, so they can be ignored. To check for this objective, I would look at all the students in my photo area and determine which class has the most students with at least one of these gavvel tokens. Remember, a class is made up of all the students to the right of a teacher before you get to the next teacher or in the case of this teacher until you get to the end of the board. Here I can say that this is my class with the most students who have at least one of these gavvel tokens and I have one, two, three, four, five of those students. Let's assume my opponent only had four. When checking objectives, determine who came in first than second, and if you have more players who came in third or fourth, remembering that you can only place if you achieved at least the minimum shown. Then those players gain the related points showing on the board here based on your number of players. You'll find the four player scoring on the other side. And in our two-player game, I came in first for this objective, so I would earn 14 points while my opponent would earn six.
If players are ever tied for placement, add together the points for each of the places that they would take up and divide them equally, rounding up. Let me give you an example. Pretending we had a fourplayer game. Let's assume there was a tie for first and second place. Those players would add 18 and 12 together, which is 30, dividing that by two and then earning 15 points each. Then the person in third place would get six points, and the person in fourth would get two. If there had been a tie for second, third, and fourth, then the person in first would get 18 points as usual, and the people in second, third, and fourth would add together 12 + 6 + 2, which is 20, and divide that by three, rounding up, earning them each seven points. All of the objectives handle scoring for placement and ties this way. So, now let's go on to this one, which looks for having the most bookmark tokens within the same row.
players would look at their class photo area for the row that has the most bookmark tokens. They're not looking at the class, but the row. And also, again, they're not looking for the number of students, but the number of tokens. For me, that would be this row, which has 1 2 3 4 5 6 7 eight bookmark tokens in it. Then you'd score for first and second place in this two-player game, just as before. But remember, you must reach the minimum required amount to score any points. So, at least five tokens in a row in this case. Now, this objective scores for the largest group of connected students who have the bold attribute token. A group is any number of students that have the requirement, a bold attribute token in this case, who then share a side with at least one other student in that group who also qualify for the objective. In this case, I have 1 2 3 4 five students that all have at least one bold attribute and share a side with at least one other student in that group. If this student had had a bold attribute, now I'd have a group size of six. This objective looks at your column with the most paint attribute tokens, which works just like this one that looked for tokens within a row. So, we'll move on to this one. Here you count the number of students you have with three or four of these star attribute tokens on them. Since these students do not have to be within a row, column or group, you can include any
senior superlatives on tiles in this area as well. So for this objective, I have one, two, three students that qualify. Finally, this objective looks for classes which have at least four students and no empty spaces within those classes. Here I have a class with six students, but it contains a space, so this would not qualify. [snorts] This class has only three students, so it wouldn't qualify, but it also has a space, so it really would not qualify. That means I have one class here that has at least four students and no spaces. So, I have one class that qualifies for that objective. The game comes with double-sided objective player aids, which you can put around the table so people can easily refer to them while playing. And don't forget, there are other objective scoring sets you can play with with different scoring conditions. We won't go through all of those in this video, but you can refer to this page of the rule book for further examples. After scoring objectives, you now score your teachers.
Each teacher on your playerboard can earn you points based on the students within their class. For example, this teacher earns you one point for each student they have. So, 1 2 3 4 5 six points in this case. Here we have a teacher that earns you two points for every student in their class with at least one star and one bookmark attribute token on them. So, these two students would qualify in this case. This teacher scores you three points for each completed pair of two halfp paint icons. So they have two of those pairings in this case. Finally, this type of teacher earns you three points for each pair of students in sequential alphabetical order within their class.
But matching letters do not count. If these were the students in this teacher's class, then I have a sequential pair here. These two matching letters do not count. And if you have three or more students in sequential order, each pair within those counts as three points. So here I have one, two, three pairs for a total of nine points. Moving on from teachers, we now score our wildcat way tiles. You'll earn two points for each full half you filled in on the grid. So I would earn two points for this half and another two points for this half. Also score the points printed directly on your different Wildcat way tiles like these, as well as the points you earn from Wildcat way tiles that are based on fulfilling certain conditions.
For example, these cheerleaders will earn you one point for every two bolt attribute tokens in your yearbook. This would include any on your senior superlatives, but it would not count any still in your storage. We won't go through all the different Wildcat way tiles in this video, but examples of how they score are found here in the rule book. Now look at your staff cards and count how many have unique club symbols in their bottom right hand corner. I have one, two unique symbols. Then you check this area and score the points by that related number. So with two unique symbols, I would score three points in this case. Then, as it shows here on your board, you earn one point for every two signatures remaining in your storage and two more points if you did not use your ABC token. Any leftover attribute tokens you have earn you nothing.
Finally, you earn five points for each club track you reach the top of. As the yellow player, I would earn five points here, here, and here. Now, whoever has the most points wins and should put on this included class ring to show off their school pride. In the case of a tie, the tied player with the most points scored from club objectives, wins. If there's still a tie, the tied player with the most students in their yearbook, including senior superlatives, wins. And if there's still a tie, the tied players share the victory. The game also comes with components and rules for solo play, which you'll find detailed here in the rule book. But those rules I'll leave for you to discover on your own. Otherwise, that's everything you need to know to play Class of 89. If you have any questions about anything you saw here, feel free to put them in the comments below and I'll gladly answer them as soon as I get a chance. You'll also find forums for discussion, pictures, other videos, and lots more over on the games page at Boardamegeeek.
And I'll put a link to that in the description below. And if you found this video helpful, please consider giving it a like, subscribing, and clicking that little bell icon so you get notification anytime I post a new video. And if you'd like to support the channel directly, you can join the Patreon team, which I'll have linked below. But until next time, thanks for watching.