Skip to main content
Loading video...

I've COMPLETELY Changed My Mind About GLUE?

Transcript 14:07

In this video, I'll tell you how my strongly held beliefs about the right glue to use were wrong and now things are better. This video might sound pretty elementary to some of you, but I still want to put it out there for people new to the hobby. Remember, this channel is designed to help people get into the miniatures wargaming hobby. Also, it might be good for people who are sometimes stubborn and set in their ways, like this guy. You're never so old that you can't learn something new, right? that that whole thing about, you know, old dogs, new tricks might apply to canines, but it doesn't apply to humans, you know, unless they're being stubborn.

Anyway, this is a video about glue. There are three main types of glue that are used in our hobby. Uh, CA glue, also known as cyanoacrylate or super glue. Uh, plastic cement is another kind. And then PVA glue. And frankly, I mostly just used to use only CA glue for everything, but my mind has been changed and now I use plastic cement for some things and CA glue for the other things. PVA glue is still useless in my opinion, unless you're, you know, gluing construction paper together in fourth grade art class, but I'll get to that in a minute. I used to glue all my models together with CA glue because of two main reasons. One, mixed materials. I used to use a lot more like metal and like resin models. Plastic cement only works on plastic, specifically polystyrene. So, when gluing together metal models or cast resin models or even 3D printed models, plastic cement wouldn't work. Even if you were trying to glue like a polystyrene piece to a metal or resin model, it just it's not going to stick. The other reason I used CA glue, basically, when I first tried plastic cement, it was some Games Workshop

cement in a plastic tube with the long nozzle, and it kind of sucked. The Citadel plastic glue in the tube with the skinny nozzle that I first tried back in the day really put me off the idea of plastic cement in general. Even with like the little skinny, you know, nozzle, I found the glue difficult to apply cleanly in the small spots that I wanted to put it. Frequently, I would kind of get it in places that I wouldn't mean to. And and and you really don't want to get like the plastic cement all over your plastic models. Secondly, I used it on a polystyrene terrain kit from Games Workshop, not something weird, right? Some old City Fight Terrain if I remember correctly. And over time, like maybe a year or two, the glue got weird where I had like glued the pieces together and then and then brittle and then the joins didn't hold in some places.

It really put me off of plastic cement for a very long time. And I exclusively used CA glue for pretty much everything from then on. I used it to glue polystyrene models, you know, known also as hips, high impact polystyrene, which are basically, you know, stuff on sprus like, you know, miniatures, uh, model airplanes, like stuff like that, terrain kits and whatnot. I also used it for, you know, metal and resin. As I mentioned before, I even used it for basing material instead of PVA. I don't like PVA because it doesn't really stick to plastic or to literally anything that it can't soak into, right? Like paper and cardboard and stuff like that. It can soak into it, but it can't soak into plastic. It can't, you know, soak into your finger. That's why you can peel it off your thumb really easily and stuff like that. It's probably great for gluing flock to your gaming board if you like water it down and, you know, spray over that all that kind of stuff. But I honestly hate flock, so I have no use for the stuff at all. So I was CA glue all the time. CA glue does have its problems, however. It sticks your skin together really well and it sticks to your skin. Other things that are not skin sticks them together really well.

Now, the rumor that's been going around for years that CA glue was originally designed to close wounds in World War II. I've been hearing this for years. I'm sure I've repeated it. It turns out it seems to be incorrect. You know, upon doing even just a little bit of Googling, it was made in the ' 40s for gun sites and then they were like, "It's too sticky and it won't work." And it was a thing and then eventually like in the ' 50s they put it out as as actually glue. Unfortunately, like the fact that it sticks to your skin so well, it makes it difficult sometimes when you try to glue a tiny little arm or head or pouch or whatever to the model and instead you stick it to your fingers. Also, uh, CA glue can be kind of brittle sometimes, especially when the glued model gets really cold. If you leave your Army case in the car overnight on a cold Wisconsin winter, then you can expect like bolters and arms and such to start falling off your models real soon. But sometimes that can be a blessing with CA glue.

Plastic cement actually melts the two pieces of polystyrene at the join. So, it is technically more of a weld than anything. What that means is that usually other than the weird GW plastic glue that I bought back in the day for that terrain that didn't work very well, once normal plastic cement is like together, those two pieces of polystyrene aren't coming apart without cutting. However, with CA glue, if you do want to like pop off an arm to put on a different one or something like that, you put the wrong one on or you're like, "No, I actually would much rather have a plasma pistol or whatever," then you can either use CA debonder solution, which is some fluid you can get for your hobby store, or you can just leave the model in the freezer for a few days.

But then I started hearing about this mythical material, sprew goo. Okay. So, it's not like actually like mythical, right? It's it's just not sold in stores or anything. You have to make it yourself. Basically, since plastic cement melts polystyrene, that's how it glues things together is by welding it via melt melting. Then, if you cut up small little pieces of sprew with your clippers, right? And then drop those pieces into a bottle of plastic cement, the sprew will melt into the the the cement. And then once you finally put enough pieces of little clips of sprew and things like that in there, it'll get kind of gooey and it becomes great for filling gaps and models and things like that. There's no specific recipe or anything. You just have to kind of keep adding sprew to the cement until that you get the, you know, until you get the consistency that you want. Also, just so you understand, this isn't something that you do, you know, quickly in an afternoon. Sprew goo can take days to get the right mixture. Like you put in some sprew, you have to wait for it to melt. You come back and check it, you know, later on that night or the next day. It takes some time. And again, I can't tell you how much sprew it takes to get the sprew goo that you want.

That's a journey that you must travel alone. Also, you can't do this with the plastic cement that's in the bottle with the skinny nozzle cuz you can't get it in there. need to use the really thin uh plastic cement in the square glass bottles with a little brush in the cap. Learning about this stuff, the thin cement and the glass bottle and sprew goo really changed how I build models. It started pretty recently, right, with my zone mortalis terrain that I'm building right now for Necroanda. I was gluing all of the pieces down to the, you know, polystyrene tiles with CA glue mostly because that's the glue that I mostly used. If the pieces are 3D printed, like PLA filament prints, then I'm still to this day using CA glue on those parts because, like I said, plastic cement doesn't work on that stuff. But when gluing normal polystyrene walls and columns and such to the polystyrene tiles, if I used CA glue, then I'd find that sometimes when I picked up the tiles later after everything cured and dried or whatever, you'd hear the glue joins kind of creek and crack due to the flex in the plastic tile and the weight of the terrain. That was a problem. So, for those polystyrene to polystyrene parts, I decided to start using plastic cement, which people had told me was a good idea. However, I didn't just use the regular old thin plastic cement in the glass bottle. I

was using sprew goo. Not super thick gummy, you know, like kind of sprew goo that some folks like. Mine was a bit thinner. That's another great thing about spru goo is that you can make it as gooey or as, you know, not so gooey as you want. You could probably have, if you wanted to, multiple bottles of different gooiness in your arsenal. If if you did that, it's probably a good idea to mark them on the label so you know which one's which. And the slightly thinner sprew goooo worked amazingly on my zone mortalis terrain. The stuff is very sturdy now with the, you know, the plastic cement all welding it all together, right? I've now built 10 tiles and they're in varying states of paint kind of currently. They're 1 ft x 1 ft tiles, but I'll probably be building more tiles soon. I eventually want to get to 16 tiles so I can set up a 4ftx 4 ft board.

But at this point, uh, with with, you know, 10, I can do a 3ft by 3 ft board, which is also a great size. Plus, I have an extra tile that I could pull out or move around or whatever. The sprew goo helps a ton to hold the bigger pieces together while they set as well. The thinner stuff, it works great, but you have to like really press the pieces together longer to get it to hold. I found since I was on a roll with the terrain, I decided to start trying to use the plastic cement on miniatures too. I had used CA glue on my codor models for necroanda that I built last year, but now I wanted to build some palanite enforcers. Next, I used the plastic cement and found that the little brush thing that's underneath the cap is so much better for putting the glue right where you want it when sticking small parts onto my miniatures. I mostly used my thinner sprew goo to put most pieces together rather than the super thin clear stuff. However, I usually use the clear stuff to smooth out areas where some of the sprew goo might have squeezed out when I put the two pieces together. A little bit of the thin stuff over the edge, and it just smooths everything out, and it it works out really, really nicely. So, these days, I'm all in on plastic cement. I'm a convert. I usually keep two bottles around. one clean one, you know, and and one sprew goo bottle, just not the super super thick sprew goo. If I need to fill

a gap in in a model or something like that, I'll just use multiple layers of the slightly thinner sprew goo that I've made for myself. You know, you put it down, you let the first layer dry or cure or whatever you call it, and then you then put on another one. Then I usually use the clear stuff to again help smooth things out and then let it cure. It's really helped me to enjoy building again. I mean, well, I'm still not fond of building many Games Workshop models these days because they're, you know, they're a zillion pieces for some reason, but it is slightly better with plastic cement. So, if you build a lot of polystyrene models and miniatures, mostly stuff that comes on sprus and you've been using CA glue for those, try out some thin plastic cement in the glass bottles with the little applicator brush under the cap and make yourself some sprew goo as well. It's really simple and can really make your miniatures a lot more sturdy.

dropped miniatures are much less likely to like result in like popped off arms and stuff when you use plastic cement. But now just remember plastic cement on polystyrene and CA glue on everything else and PVA glue stays on the shelf at the store. Or maybe that's just me. You can find the thin plastic cement in the little square bottles at tons of hobby stores and game stores. There's a bunch of different manufacturers out there who make it. I've tried several and I'm happiest with the Army Painter plastic cement, but try out whatever you can find. As long as it has the little glass square bottle and the little brush under the cap, it'll change the way that you build models on sprus.

What do you think? Do you like plastic cement or do you just stick with CA glue for everything? Let us all know down in the comments below. And while you're down there, some depressmentation of the like button. Hopefully your finger won't stick to it. Uh that, you know, or even the hype button on mobile. All those things always help. While you're down there pushing buttons, if you haven't already, hit the subscribe button. You could do that. You'll get these videos pushed in front of you pretty much every week, and it's free. Thanks for watching.

Progress saved