Skip to main content
Loading video...

The Secret of my Baking Soda Basing Technique

Transcript 16:24

in this video I'm gonna explain to you the secret of my baking soda bases it's not a big secret so I've always liked to try to you know it better myself as far as my craft of tabletop wargaming hobby you know I like to make it so that I can paint better I like to make it so that I can build and construct and convert better and I've always tried to make my basing be something really kind of special if I can I I enjoy the basing aspect of it I enjoy the telling a little story on the base of my models so when I first started getting into wargaming and everything and people would say oh you sprinkle some sand some PVA glue and you you there you go your base is done I thought that that doesn't look right to me the fact of the matter is is that sand in comparison to a 28 millimeter model is wildly out of scale for being sand grains of sand next to a person who's supposed to be six foot tall roughly but is about 28 millimeters from eyes to the bottoms of the feet sand is basically like gravel at that point so if you want your models to be standing in a field of gravel well you can do that I've done it in the past you can kind of see some images here of some of my oldest models that I ever painted and yeah they're pretty much standing on a big old field

of gravel I didn't want to do that forever I wanted something that was a little bit more to scale so I started thinking well what else is what's what's finer than sand and I thought well salt but it's not that much finer and then one day I was over a friend's house and he did something that was kind of interesting he was trying to magnetize some sort of Space Marine vehicle I don't fit was a rhino or a predator or of one of those things but the response ins and he needed a magnet to be in a certain spot inside there but he didn't want to have to like drill anything or glue anything Ubuntu glue would you didn't want to have to like drill it so he could glue it he just wanted to glue it and have it sit in the right spot and he has a background in scale modeling before he got into gaming and so he took a big blob of CA glue your normal superglue stuff and then he dropped the magnet in that spot that he wanted to be in and then he took this white powder and he sprinkled it all over the top and I said well but what the heck was that he's like oh she's baking soda yax kind of like as a catalyst it almost instantly hardens up the CA glue and then it'll hold a magnet in place really well and then I don't have to wait for it to dry and you know it'll slide around inside the glue it just boom instantly pretty much just you know rock-hard zit pretty much right where it is and I started thinking more and more about baking soda and realizing how completely fine-grain it is in comparison to say like salt ER or you know sand and I started kind of messing around and doing some things and I'm gonna tell you about those things now my first couple of tests were on some

models that I was just kind of hoping to get painted up real quick there were some antique skeletons and so I basically just coated the base in in CA glue and then just dumped it into a thing full of baking soda and that's not super great that's not a perfect thing because what happens is that as the catalyst I'm assuming I'm no scientist I'm a baking soda scientist but when the Cataclysm no that's not right anyway when the catalyzation is happening if you have too much powder I think on top of too much glue it kind of gets these weird ripoli looks which if you're looking for that if that's the look you want in your base is great but if you don't then you know it's probably not such a good idea so in that situation I started kind of going in other directions and saying well how else can I do this so it won't cause that weird super bumpy almost wrinkly look to my bases turns out like a lot of things in life it's just patience what I've done now at this point is I've started taking glue and I've started putting the the glue down on the base and spreading it around with a toothpick and then I sprinkle the baking soda onto it and it starts to harden up very quickly and doesn't generally get too bumpy but it's got a nice kind of texture to it and sometimes I add texture I'm gonna show you that stuff here in a second actually down here on the below and on the tabletop but I just want to explain the overall process and kind of how I got to where I got I'm sure other people this is not something I've invented I'm sure it's just something I kind of sort of discovered myself and maybe just because

I didn't do enough research but a lot of people keep asking me as they see my models and they see my faces they're like how are you doing those bases why is the why is the grits so fine and I explained to him how I do it and I just figured I should probably explain to you guys all right let's see if we can get this to work so this is an old square bass from fantasy I think it came with something that I bought I don't have any what anymore but it looks like this and it's something that I'm gonna use to practice on because I don't see myself using it as a normal modeling tool so first thing you need is some super glue some cyanoacrylates some CA glue whatever you want to call it I use the stuff that I get at hobby town and I normally can get the top off but sometimes I can't so sometimes I have to get at it with a pliers or not okay so you take your CA glue and you take your base all right and all you have to really do is just just slop a whole bunch on there that's really all you're gonna do you're just gonna get a bunch on there and then we're gonna take a toothpick and we're gonna spread it around all right so the trick is is that you basically just want to move it around and get it where you want to go with the the you know the I think some people call them cocktail sticks here we call them toothpicks but you just move it around if you've already got the

model glued to the base you want to use this to kind of scooch it in between the models legs but if you were doing some sort of like a objective marker or something like that then you know you don't need to so you do that and then you could just start sprinkling but a lot of times you want to actually start putting some texture in if you put some texture into the glue before you start sprinkling on the baking soda what happens is you can actually kind of make the baking soda bumpy underneath so I like to use kitty litter very frequently so I'll just take some kitty litter and it's important to kind of not try to get it all over the place and sometimes you put a little sometimes you put a lot and you kind of just get it to sprinkle like this and it's sitting there like that and now the big trick to not making a giant mess is to use one of these little Tupperware doohickeys and you take this and you take your your stuff here and then you just what I'm doing is this I'm just moving my fingers back and forth and I'm just sort of kind of like just kind of it's like after you taken a pinch of it and you're just gonna sprinkle your pinch directly all over on to the CA glue and it will kind of get in there and be clumpy and the more you sprinkle the the more it'll spread out but that's pretty much it you're just gonna do that and try to cover as much of the CA glue as you possibly can and get as much of it in there and then you're pretty much ready to go now this does not mean you are now ready

to paint you have to let this dry a little bit and it will dry quickly because like I said it's a catalyst sometimes I will tap it and that will help sometimes I'll use the edge of my exacto blade or something along those lines but that's basically it now that looks like a hot mess doesn't it give it time as soon as it starts to really set up I'm gonna go back at it with a brush an old crunchy brush that you don't use anymore you never throw away a brush when a brush gets terrible hold onto it because you can find other uses for it but you one of the uses is to get rid of this stuff kind of blow it and then you go away from there and then you're pretty much ready to go so it's been about three or four minutes and it's pretty much ready to go so here you've got this it's pretty much ready I'm just gonna start brushing off any excess okay using an old like I said a crunchy old brush that you're not gonna use for paint any more because it's gonna get I would actually take this brush and just set it aside and this is your new brushing off baking soda brush because it's gonna get baking soda in there and I just usually brush back and forth and try to get as much of it off as I can and this helps to break it apart and then I do this and just blow on it a couple of times a couple quick bursts and now you have basically a nice little piece of texture that's going to look very different it's gonna look maybe in this situation a little muddy but it's got some kind of bumpiness or chunkiness underneath it at this point I couldn't then now throw down some more glue okay so I throw down a little bit more glue here right and now I'm gonna sprinkle some more kitty

litter and we'd be very gentle just a little bit here a little bit there that was too much but you see what I'm doing and now I'm gonna have texture on top of the texture so now I've got more like the kitty litter in this situation becomes almost like little well not little but bigger rocks like to scale with somebody like me they'd be rocks or maybe like you know tennis ball-sized or maybe even a little bit smaller depending when you go through your you know thing of kitty litter and don't use used kitty litter go and find someone who's got a cat say can I have some kitty litter that has not been sullied and then have a little bottle of it it will ask you for like a really long time in the situation you can separate out the bigger chunks from the littler chunks sometimes depending on the manufacturer there are flavor crusts not flavor crystals but there's like weird you know crystals in there that allow you to they give off like a fragrance or whatever and things like that I would maybe try to stay away from that you get the cheap stuff because it frequently comes in it's got a high clay content so the glue will soak into it to hold it a lot better and it'll just pretty much work really well that way if you want to here like I've still got some of that glue that's still wet I can actually just sprinkle little bit more and and then go from there just knock it off and like I said that's pretty much it now if you were doing this as a model you could then glue the guy on to it and then I would say prime on top of all of this I would not generally do this at the end once you've painted your model I would do this before you even start priming some people don't like the texture before they paint I am NOT one of those people I believe it makes a lot of sense

because as you prime you're actually sealing down the texture of the base a little bit more so definitely look into just making sure that you've got your texture your person's glued down if you want to do your bases completely separate from a person that's fine too but I would definitely I would never let the baking soda just be raw unpainted unprimed because it will yellow over time there are some people who try to use it as like a snow effect and they'll sit you know sprinkle a bunch of baking soda and that'll look good for about a couple of weeks maybe maybe a bit longer but after that not so good so yeah if you want to do more you can take pieces of cork and things like that and you can slide little pieces of cork on there you can put the stuff on top of the cork I like to do a lot of different things but really what I've done here here's an example of an unpainted base so this is my redemptor dreadknot for my space marines and you can see here what i've done i've taken a lot of different parts you've got some basing material from one of the press-fit primaries marines you can see there's a resin skull down here you can see there's a last cannon that i just kind of cut off to look like it got buried and you can see the mixture of not just litter and also the baking soda but you can also see there's some black sand on there too there's a bunch of different things going on all over this piece and I'm just about to get ready to start priming it but I did all this before I primed it so that when I prime it I'm covering

that all up and it'll work real nice and also I hope to kind of again keep it down I obviously went through and I took my brush and I brushed off as much as I could because you don't want loose baking soda to get primed because then it'll flake away and then the primary flake away and then it's just a mess so this is a technique I've been using in my models for years and years here's a bunch of different examples of different things that I've done with this same technique I really like the way that they work out I really like being able to kind of tell a story you can do things if you need to like put some liquid green stuff underneath there to give yourself like more of a hill or a raise you can throw down pieces of slate you can put down little tiny rocks twigs you know branches little tiny roots anything that you find outside if it's roots and plant material you're gonna probably want to dry it somewhat like in the oven or something like that don't dry it in the microwave that won't work go from that direction and then see what you can get but you're gonna need to have that stuff really like dry because otherwise if it's all glued down and painted and then it's slowly letting off moisture as its doing that it will really ruin the paint so you want to make sure that the pieces that you're gonna use if you're gonna use wood and things like that make sure it's very dry but this stuff is it's just really a lot of fun to work with I think it's very quick you know you you you have to be concerned about as you're slopping a lot of CA glue on there about it's spilling I've had that happen before and getting

all over stuff so there's that kind of issue but it it otherwise it generally works pretty well some people will say yeah but ca was pretty expensive you're spending a lot on CA glue there and that's true to some degree but you know PVA glue though cheaper doesn't stick to plastic bases very well and I have seen people who have done all their basing and put their model on there and the entire base just comes off like you know when you try to peel like white glue off your fingers when you were a kid in school it's like that only off a plastic which means it's even easier to peel so I would definitely try to use the CA glue it's a little bit more expensive but I think you're gonna be happier down the road so again there's just not that much to it it is simply putting CA glue on the base using a little cocktail stick a little toothpick whatever you want to call it to scooch it around and get it to cover all the places you want maybe sprinkle some kitty litter or some sand and then just that pinching motion just grab yourself get yourself a little sandwich container Tupperware thing full of baking soda leave it in your hobby area and then just do it right over it so that any that you does it just it goes in back in it doesn't get all over and make a giant mess because it will make a mess if you knock this over it will make a giant mess I can tell you that for sure but do that and then let it dry for 5-10 minutes at best and then just brush it off with an old brush blow on it and then start adding more stuff at a scale add some cool little sticks add some stones whatever you want to add to make your bases really tell a little

story because that's the most important stuff you want your bases to not just be a thing that your little person stands on but to really place them in the atmosphere and to make the overall piece really a lot more interesting you but that's basically it you just spread it around and it takes a while to dry try to not get it on the edges if you get it on the edges will wipe it off with your finger oh and then you get it on the other edge and it's already going to hell so let's see here I'm gonna try to figure out I didn't bring up napkins so I'm just gonna wipe it over here when you get CA glue on your fingers the best thing to do is to try to wipe it onto something plastic so you can try to stick your fingers to the thing that is plastic all right so now I've glued it to the oh right this is spectacular okay we're doing great

Progress saved