Skip to main content
Loading video...

This Painting Handle is WAY BETTER

Transcript 9:31

In this video, I'll show you a paint handle that I stumbled across that works very much like the Games Workshop handle, but better in every way. Paint handles are great. They help your miniature painting immeasurably. They keep your fingers and the oils on your fingers off of the model. uh they stabilize the model while you're painting and they make it more comfortable to hold the model for long periods of time. And paint handles don't have to be fancy either. I used to use an old pill bottle and some poster putty to hold my models and it worked pretty well. But then Games Workshop came out with something that I liked a lot more nearly a decade ago. Back in 2017, Games Workshop came out with their own bespoke paint handle. It cost about eight bucks, if I reme remember correctly, the the really big selling point, at least to me, was that it actually kind of like gripped the base of the miniature. It used a a spring-loaded clamp mechanism to hold the miniature firm, and it had a big chunky handle that was kind of short, but mostly, you know, fit pretty well in my hands. The clamp was really convenient to me because some of the brands of poster putty that I was using were sometimes a bit too difficult to dig out of the underside of the miniature bases like after you were finished, especially if they were the

older style kind of like slott bases. Also, if you took long breaks in your painting, like if you didn't touch a certain model that was poster puttied to a pill bottle for 6 months or more, some brands of putty would get stiff and really hard and even more difficult to remove. So, a simple kind of just spring-loaded clamp was a great boon. At least, you know, I thought so. I probably wasn't the only one who thought that either because the OG paint handle sold really really well. I know I bought a lot of them. Even though it was like quite easy to just pop models on and off of the clamp thing there, it was even, you know, easier yet to just have a bunch of the handles, you know, cluttering your desk like I did. So, I'd, you know, generally pick one up at my local shop whenever I went in there to play because if you go in there just to play, you should buy something if you're playing at your, you know, local shop. You got to support the FLGS. Then sometime in late 2020, Games Workshop released the painting handle Mark I, which looked considerably different than the original one. The upgrade was the head that, you know, held the base of the model. It still held bases up to 40 mm like the original version did, but it was a considerably smaller clampy bit.

Like it really this helped it to get out of the way when you were trying to paint like let's say the unders sides of models and things like that, right? The new clamp didn't block your line of sight and your brush you like the old one did. Unfortunately, while I liked the new head part more, I liked the newer handle part much, much much less. It had this like skinny little neck part that really didn't work great with my oversized mits. There were also a ton of other paint handles out there on the market from Game Envy and from Red Grass and like tons of other companies, but they mostly relied on either poster putty or magnets to, you know, hold the base of the model. And then there were like so so many different 3D printed solutions that came out over the years as well. you know, mostly again for either putty or magnets. Although I've heard of some 3D printed handles that used like rubber bands to make some kind of a clamp like Games Workshops, but I've never tried any of those. The GW clamp head was like the gold standard in my mind, even if the handle part wasn't all that great.

Fast forward to this summer and I was at this event called DN D in a Castle held in Ohio. It's a neat event really. But I wasn't there to play, right? I was there to work. I was sent there by the army painter to teach the players how to paint their miniatures. When I got there, there were tons of like Whiz Kids pre-primed minis for people to work on and practice on and stuff like that. And there were tons and tons of Army Painter paints and brushes to use. The people that were running the event were smart enough to also, you know, buy some nice adjustable desk lights for people to use because, as it turns out, none of us is getting any younger and neither are our eyeballs. And they also bought paint handles that they found on Amazon. Now, I've never thought to look on Amazon for painting handles. Like I said, there's tons of them out there from all kinds of well-known companies and even more 3D printed ones. We are spoiled for choice.

However, these were really interesting to me. From a distance, I thought that they were the Mark 2 handles from Games Workshop because they basically kind of had the same clamp head thing on top, but they were taller handles and they didn't have such a skinny neck part either. I picked one up and looked at it and it just felt really nice in my hand. It fit far better than either of the previous handles from Games Workshop, even the chunky one from back in the day. The head wasn't exactly the same as the Games Workshop Mark I handle. It was actually a bit better. Unlike the GW clamp, this one had notches in both tiers of the kind of clamping surface. You know, the little basically it allows you to easily kind of lock in square bases for painting. Like if you paint stuff for like the old world or maybe Mheim or you know any other game that uses square bases. This is something that Games Workshop should have done from the start but they didn't. This weird company on Amazon did do it however and I think it was a welcome addition to the design.

Another welcome addition. The bottom of the handle has a magnet in it. So if you set the handle and you know the model that it's holding, if you set it down on a ferris surface like a steel table or a steel tray or something like that, then it is far less likely to tip over to me. Like this is this this added an incredible piece of mind that I probably wasn't going to like bump the table and then like knock my model over and potentially like scuff the paint job or even break, you know, a piece of the model. Now, with the Whiz Kids models that we had at the event, they're kind of bendy, so they're not, you know, particularly likely to break, but I also personally paint a lot of resin 3D printed models, and they can be pretty fragile. So, it's actually really nice that magnet. I don't have a steel table, but I do have a steel tray that I use once in a while. However, I also picked up a pack of these 1 and 1/2 inch steel discs with like sticker type adhesive on one side and I peeled off the thing and I stuck one to my hobby mat to try it out and it works pretty nicely to keep the painting handle in place. The company that makes this handle is called Hubist Hubbist. I'm not exactly sure how it's pronounced, but they sell a lot of other like hobby supplies on Amazon. a lot of weird niche stuff like weird little airbrush supplies and tiny sanding pads and stuff like that. After using these handles at the D and D in a castle event, I ordered some before I even got home. They were quickly

delivered and they're becoming my go-to handles these days. The the head part, it's great and the handle part fits in my hands like really pretty perfectly. This video isn't sponsored by Hubbist or Hubist or or whatever, but I have an affiliate link for the handle and the steel disc sticker things and a whole bunch of other stuff down in the description below. So, check that out if you're interested. The handles cost $12.99, which is 49 more expensive than the GW Mark II handles. You don't usually get to say something's more expensive than Games Workshop, but in this situation, 49 cents more expensive. However, they are like bigger and better. So, I think that 49 is totally worth it.

I was just really impressed with how much I liked these just random handles from Amazon. They're pretty much the best of both worlds. The like the really nice head from the Mark 2 GW handles with those neat squarebased upgrades as well and a much better like handle part with a magnet at the bottom to boot. Check them out if you're interested. Again, if you want a affiliate link down below, what do you think? Do you even use paint handles? Do you have some other solution that you prefer? Let us all know down in the comments below. And if you like this video, uh, a little bit of spring-loaded depressment of the like button or, you know, like the hype button if you're on mobile always does help get the video out to more people, and I appreciate it. While you're down there pushing buttons, one of them says subscribe. So, if you're not subscribed already, you can hit it now and you'll see more videos like this every single Friday pushed in front of you and it's free. Thanks for watching.

Progress saved