Skip to main content
Loading video...

Beginner Miniature Painting Techniques that Work

Transcript 16:31

in this video i'm going to tell you about the techniques that a beginner needs to get painted miniatures on the table it's fez time it's that time of the haircut cycle and so fez in last week's episode i said these are some of the techniques that beginner model editors beginner painters beginner people into the hobby should ignore because they are not for beginners although you hear about them all the time um they are for you know people who are have been doing stuff for a while i've been painting for a while those are the people who should be looking at those things if they're interested but beginners can disregard those particular techniques if you want to watch that video ciao and in that video i said and next week i'll talk about the techniques that uh you know painters beginners need to get stuff on the table so here we are this is all assuming that you've already built your miniature you've put it together you've clipped all the little bits whatever glued it you know that all that stuff um if you don't know how to do that kind of stuff i'm going to have to make a separate video about that or just do some searching on youtube you'll find other people talking about it but i'll eventually make a video about that one probably as well so step one with pretty much any paint job is prime your miniature now i generally either use a rattle can or an airbrush and most beginners are not going to have access to an airbrush so we're going to deal with a rattle can rail can spray paint it's a spray can generally

you are looking for something that is an actual primer you don't want to just grab any old spray paint you generally want to find something that says primer on the can you generally don't want to find something that says like two times or you know all in one coat or stuff like that those have a tendency to be thicker and you don't want to fill in the details on your miniature the little fine extra little things you don't want to fill that in with paint when you're doing your priming priming should always be light coats you want to start out and just do a light coat over your miniature and then you want to let it sit for a little bit and then wait maybe look at things on your phone i don't know watch the youtube video real quick something like that and then do another light coat and you don't want to do one thick coat because it will clog the little details in your miniature and you don't want that the other thing that's very important if this is your miniature and this is your spray can don't start by going pointing it directly at the miniature and spray when you do that very frequently with a lot of different nozzles and a lot of different spray cans they will splatter a little bit so if you're pointing at the model you're going to be splattering the model with thicker globs of paint which are going to potentially either at least look weird if not just fill in a little bit of um your you know detail so you always want to actually point not directly at the model but a little bit to the side of the model start the spray and drag it across and then let up the spray so it's kind of like a that will help you to not splatter your model because also if you stop and let go again potentially some splatter so always drag past the model when you're trying to out you know outside and you're doing

some some priming or whatever and you'll have better looking models especially if you also do multiple thin coats and give it a little bit of time in between each coat so what color should you prime with that's kind of an age-old question that gets tossed around in a lot of different places quite frequently um here's my opinion i generally like to prime with a darker color if my model is going to be darker and if i'm going to have a model that's going to be lighter i generally use a lighter color primer so some people like to use white some people like to use black some people like to use gray it's kind of up to you the benefit in my mind to using a darker color generally for the priming is twofold number one it any places that i miss in the model then turn into shadows you know what i mean so it's like really black or maybe it's kind of dark brown depending on the primer i'm using and any spots that i don't catch with paint like down in the little nooks and crannies in the armpit and places like that just turn into shadows where if i primed the model very well all white then any places i miss are not shadows there this weird white glowy area in the armpits which is not good when you have glowing armpits i just i'm pretty sure about that so make sure that you put it on there and you also want to make sure that you get it into all the nooks and crannies you want to spray it obviously you've probably set your models down on the table and you're spraying but you also want to be able to tip them over and try to spray up into the undercuts into the parts that may not get paint on them when they're coming from above watch that stuff as well you don't just have to use either black

or white or gray for your primer as well there are plenty of colored primers out there and they do have an added benefit when you use a colored primer it generally saves you a step because you generally use the color that is going to be the main base coat of your model which i'll get to in step two but doing that makes it so you don't really have to do as much of step two because if you are painting blood angels who generally have red power armor you would then spray them potentially with a red primer and there are a lot of companies out there like the army painter and games workshop and let's see here vallejo they all have spray primers that come in lots and lots of different colors sometimes you can find stuff at the automotive store that will work it's still a primer but it's still a color that you can use and you might be able to find it for even way cheaper than sometimes some of those other hobby brand sprays but it's important to understand that if you do that you then have to make sure to cover it all up in all the little spots and little nooks and crannies sometimes because otherwise again if you're a space marine and i miss a spot now you have this weird red spot that's maybe not supposed to be there so take a look at that step two now this is base coloring your model what you should do is take a look at the model and figure out what's the biggest color block on the model if it's a barbarian they're probably mostly naked shirtless they're wearing you know no pants just got a loincloth or whatever so therefore whatever the flesh tone is you're gonna paint that model that's your base color if it is an evil wizard in a big flowing robe what color is the robe purple cool then purple is your base color if it is a space marine um that is

blue then blue is your base color if you're a skeleton you know that you're painting what color is the skeleton's skeleton i guess it's skeleton color so you know again that's your base color figuring that out and deciding really helps you because in the previous step you could potentially use that color as your primer but if you don't then you are going to start painting that color over the top of your primer and you're going to be not crazy careful if it gets on some spots like adjacent you know if you color outside the lines a little bit that's okay because you're gonna paint those parts later on so cover everything up with your base color that's supposed to be that base color with these guys it's the red uh you know cloak for the most part and so that's why i painted this guy all you know red over the black and this guy i actually just primed red to start with and then you know he'll be in the next step doing this will help you to kind of analyze the model a little bit look at it and go okay so what am i doing here and understand take a look make sure you understand what's the predominant color and then put that on and put it on thin coats maybe two sometimes you have to cover you know especially if it's a real dark color like black and you're trying to cover it with something like red you might have to put on a second coat because you know it might not cover completely in the first coat but maybe you want it to look splotchy because chaos cultist whatever figure out what you want it to do and get it ready to go and then let it completely dry now is the time in which you are going to put wash onto that base color that you painted before

and a little note is that wash will darken down things a little bit so potentially if you look at this color and you're like this is the absolute perfect color i love it it might actually end up ending being a little dark once you put wash all over it in this phase so you might have actually wanted to use a slightly lighter color in the first phase or the previous phase phase two it's a possibility it depends it usually doesn't matter that much and in the next phase we're gonna actually lighten things up again but anyway once your base color in step two is totally dry then you take some wash and you can use wash from all kinds of different companies out there like army painter makes good washes games workshop makes good washes and pick a color that kind of works with your base color that you're covering up so the these guys are red right this is a red dude and so red is a warm color so i'm going to use brown for two reasons number one because brown is a warm color and red's a warm color so those sort of tie together a little bit but on the other hand also brown is kind of dirt so i want this guy to look a little grungy and what you do is you literally just slop it on you put it on good and thick and when you do that it will get into all the crevices and the recesses if you get a puddle where it goes too thick and you're like well i don't want that to happen you just take your brush wipe it off on a piece of paper towel so it's basically dry and then you just sort of suck it up again you just poke it into that puddle and it will suck up into the brush and then you can either redistribute it someplace else on the model or you can just you know wipe it off on your paper towel but do that get it so that it looks nice and it's in all the different little nooks and crannies and again if it gets on the

other stuff that's not your base color that's okay and then let it dry and washes will take a good long time to dry so make sure it's completely dry before we go to step four now we're gonna dry brush and what this is going to do is the dry brush is now that we've darkened everything down a little bit that base color originally we darkened it down we are now going to hit all the raised parts and bring them back to our base main color so that the color that we used originally when we first painted over the primer and or if we used you know a primer color we're going to find a color that matches that primer color but anyway you get that color and you just dab it onto your makeup brush i did a whole video about makeup brushes i would strongly suggest you watch it because it will save you tons and tons of time ciao dab it onto that makeup brush and just start going to town on that model and as you brush that stuff onto those base colors it will get on other parts that you don't want it to but that's okay because we're going to be painting those next and it'll all get covered up in this situation we are being a little bit more free with our dry brushing because we know it'll get onto other spots and stuff like that and they'll get painted over later it's fine so do this because then at this point after this is done a majority of your painting job is going to be done on this model because we picked the dominant color and now we are basically done and we have put down the base color we've washed it to bring down the shade and then we've also highlighted it to bring back up the highlights in the high parts so we've done a big portion of the model in basically three steps

paint wash dry brush and now we can go on and do the rest of the stuff so how many more of these uh steps are there uncle adam i'm sure you're asking when you say go and do the rest of the stuff well honestly all the rest of the things we're gonna do to this model are all just variations of um steps two and three meaning the base coat painting and the wash so what you've done now after everything is dried in your big main dominant base color is now you go through and you paint the other stuff generally start with skin so find a skin tone you like and the reason you start with skin is because it's the lowest part of the model it's you know if i'm wearing an uh armband it's easier to paint the skin and then paint the armband if i paint the armband when i paint the skin i might get skin on the armband because it's raised and my my brush could tap it whereas when you're painting a lower surface it's less likely that you're going to hit the top surface but not the other way around it's i did a video about painting inside out push out and you should probably check that one out as well but paint the skin and then maybe paint in this guy's case i've got like arm wraps and i've got boots and i've got belts and i've got a gun and all kinds of different things and getting these guys to the point where all of the different parts are now covered with paint you shouldn't see any primer anymore that's really what this next step is after you've done this three part process on that first big dominant color where you threw down the color and then you threw down a wash and then you did the dry brush now you're going

through and just doing step two over and over and over again on all the different parts of the model to basically block out the colors and just get them nailed down don't worry about highlights don't worry about anything just cover the parts so you no longer see any primer or very little primer at that point you then go through and start putting wash on those parts which is again step three i'm looking at my notes and then sometimes you might want to put certain colors of wash in certain areas and certain other ones right close to them if they mix a little bit in the middle it's okay but think about the colors think about what the wash will do to the color that you put in there and then just cover it up and that's literally it you know that's that's a finished model at a beginner level and it will still look really pretty good because there will be shadow and they'll even be in some spots the dominant color on the model highlight now you don't have to go through and highlight every last little bit and things like that i'll probably talk about that in a future video when i start talking about a little bit more advanced beginner kind of techniques um taking this same model and going okay cool i got to this point what can i do now to bring it ahead but this model is totally fieldable on the table and it will look good especially if you're playing an army game and there's a whole bunch of them but even in a skirmish situation this is a decent looking model you're you're pretty far ahead already and all you had to do was kind of stay in the lines really not the beginning part more in the second part you had to be able to put wash on there and be able to maybe make sure you don't get too many big puddles and things like that and um you had to be able to dry brush

but only on that one main dominant section you don't have to dry brush on the rest of the areas you can again that's getting into advanced beginner but this will get you to the point where you can find uh really good looking models just right there in front of you by sitting down and using these simple techniques you don't have to think about non-metallic metals you don't have to think about wet blending you don't have to think just just do it this way and get stuff good and build up your skills with your hands because really brush skill is the important part to get better at and confidence confidence in your abilities is actually a super important thing to build as you're getting into painting miniatures so with these two guys you can kind of see the difference here well maybe you can see the difference here um what kind of you know ones was primed red one was primed to black that thing is a choice depending on whether you want to prime something real dark or whether you want to prime something in a base color it's kind of up to you um you know you can see by the base at this point maybe how each one looks in the final i think they match pretty well honestly so it's really up to you priming in the color saves you a step but sometimes priming dark helps you to keep those shadows a little bit deeper and maybe bring out a little bit more contrast at least that's my personal preference so that's the only thing that i think that maybe you need to think about when you're going to sit down and do this figure out whether i want to just go dark or whether i want to go with a color you know and it depends on the models obviously if you're painting skeletons i would tell you to try to find a tan spray paint uh primer and start

there because again you're already gonna be ahead of the game throw some wash on it do a little bit of dry brush boom skeleton's basically done except for the sword and the shield and skeleton pants whatever else that might be wearing you know one boot doing these things can help you to get better models on the table quicker so if um if you learned anything from this or you know i hope it helps out if you didn't learn anything because you're already a pro painter but you got friends who are wondering about this share this video with them because i think it can take people from i'm just not sure if i know how to paint or i don't know what i'm doing to oh yeah i can get models done pretty quickly hmm oh

Progress saved