Skip to main content
Loading video...

Learn to Play: Steampunk Rally

Transcript 12:15

welcome today we're gonna be taking a look at steampunk rally this is a two to eight player dice rolling card drafting racing game where you take the role of an inventor from the turn of the 20th century competing in a no-holds-barred race through the Swiss Alps you'll be building and driving your contraptions through the Swiss Alps to prove that you are the greatest inventor of all time how do you prove you're the greatest inventor of all time and wind steampunk rally by making it the farthest past the finish line at the end of the final round now that we know what the winning condition is let's take a look at the components set up and how a round in phase work in steampunk rally now let's look at the components for steampunk rally we're gonna start with the main track tiles they are two-sided there is a start tile to finish tiles and then five tiles that are in the middle that help you arrange your board and randomize your board there are three colors of dice you have the red dice which are your heat dice you have your yellow dice which are your electricity dice and then you have your blue dice which are your steam dice now let's look at the cards there are machine part cards that have a gold border silver border or copper border the gold allow

you to move more the silver give you more dice and then the copper have four connections so it's easier to connect to your contraption there are boost cards which have the black border then we have cogs you have your play Direction token then the player's specific components you will have your damage gauge your inventor pawn your inventor machine and cockpit cards your light bulb token and your player aid and if you've played the game a few times you can add complexity by using the challenge tiles now let's take a look at the setup for steampunk rally we're gonna be sending this up for a two-player game and set up takes 10 steps step number one is to set up the main track tiles you're gonna choose the side which if it's your first game they suggest using the Swiss outside and then you're gonna arrange the five middle tiles randomly step number two is to create your cog and dice pools you're gonna make sure you put this in reach of all of the players step number three you're going to separate shuffle and stack machine part in boost cards based on their border step number four you're gonna ready each stack by drawing one from each stack to

create the discard pile step number five is to flip the play direction coin and place it between two of the players step number six is to get the player components you are going to choose an inventor and take the pick and machine card there pawn a damage gauge and a lightbulb token

step number seven is to place the pawn on the start space step number eight is to construct your invention by arranging your two cards by connecting their circular valves step number nine is to ready your lightbulb token by placing it green side face up step number 10 is to set your damage gauge to zero now let's look at how a round and phase work in steampunk rally each round consists of four phases draft findt race and damage phase phase number one is the draft phase you're going to draw one card from each stack to create a hand of four cards

you are then going to choose one of those cards and place it face down in front of you then all players are going to reveal their card and perform one action with their card there are four type of actions you can perform with the card the first type of action is the construct action where you take your machine park card that you chose and add it to your invention making sure that you connect it to a valve in your invention when adding it to your invention there's a few rules that you must follow you have to connect it to your cockpit through the valves you can have a valve boarder a non valve as long as it is connected to another part of your invention through a valve you're allowed to rearrange your invention at any time you can discard any part card at any time but you will not gain any dice or cogs for doing this your cards have to be in the same direction with the title of the part in the upper left corner ground images that are located on the card do not have to go at the bottom of your invention the second type of action is to generate power you can discard a part card and gain the dice depicted in the upper right corner the third type of action is to gain cogs again you can discard a part card to gain the cogs depicted in the upper

right corner and then finally the fourth type of action is to stash your boost card you are going to place it facedown under your damaged gauge to be played later now that everyone has performed their action you're going to pass your remaining cards to the next player in the direction of the play direction token you are going to then repeat the process of choosing a card and playing it taking an action until all of the cards have been played or discarded now move on to phase 2 the vent phase in this phase you're going to be spending cogs to reduce pip values on the dice in your invention you'll be able to reduce 2 pips for one cog this is how you can remove dice from your invention making those machine parts available to use again also there are boost cards that are only able to be played during the vent phase so if you have one of those cards you can play it during phase 2 that brings us to phase 3 which is the race phase this is where you're going to roll your dice in your dice pool that you gain during the first two phases you can spend a cog to re-roll or add one pip to a die number then you're going to place the die in your invention activating one machine part at a time if there is an X on the machine part then the pips do not

matter and you're gonna just perform the action once so if I had a blue it wouldn't matter if it's a 6 or a 2 placing one die activates that action if there's a number on the part card like this part then you would take the total pips placed in those locations and divide it by that number so I would be placing two blue die on the card and then I would divide there in pips by five that would tell me how many times I would gain that race effect after placing the die and activating the race effect the die serves no purpose until it is removed using your boost cards your race effects or during our vent phase and using cogs once per round you can utilize your light bulb token to get the machine parts and race effects that have a light bulb symbol on them so for the Wright brothers you could flip your light bulb token over and either gain two red die or move one space now let's look at the race effects on the Machine part cards if you see a die then you would gain that die or the dice that are depicted on the card if you see a die with an arrow then that means that you would remove that color

dye from your invention if you see a shield with a heart you would add to your damage gauge so you would go from 0 to +1 if you see a shield with an X then you would go down on your damage gate so from 0 to negative 1 if you see the COG symbol then you would gain cause if you see a silver wheel then you would move your pawn on the racetrack one space and take terrain damage if it's located on that space if you see the gold will you would move one space and then ignore the terrain damage when you're moving your pawn on the racetrack if you see a mountain with a number inside next to that space you add that damage to your damage gauge unless you're moving backwards when it comes to your boost cards unless it directs you to a specific phase you could use them at any time when you're activating your machine park cards you're gonna perform one part at a time once everyone's done placing their die and activating their machine parts are playing their boost cards we move into phase 4 which is the damage phase during the damage phase you're going to check your damage gauge if it is zero or greater than zero nothing happens if it is less than zero so at negative one negative two then you would

lose machine park cards for each number below zero if the damage gauge resolution would require you to discard your cockpit then your invention explodes you have to take three steps when you explode step one is to move your pawn one space behind the last place person on the track the second step would be to remove all but your inventor cards and then you will reset your damage gauge to zero at end of the damaged phase you will then reset your damage gauge back to zero and that brings us to the end of the round at the end of the round you are going to perform a forceps you're going to flip your light bulb if it was on the dark side back to the green light side you are going to store dye if you can't you are going to return any unused or unstirred dye back to the dipole and then finally you're going to flip your play Direction token that would bring us into the second round and then rounds will continue on until one of the pawns has crossed the finish line as soon as one of the pawns cross the finish line you have one final round and then the inventor that makes it the farthest past the finish line after the final round is declared the winner of the Steampunk rally and is declared the greatest inventor of all time

Progress saved