Early Threatens Washington Gameplay Overview | American Civil War Board Game | Wargame
Transcript
Hi everybody, I'm Sib Blitz and welcome. If you're a fan of American Civil War war games, the game that we're going to look at today, Early Threatens Washington from Revolution Games, might be something you want to check out. Let's jump right in and get started. So, I've got Early Threatens Washington all set up for one of its scenarios. Before we jump in and take a look at the game, though, let's just orient ourselves with the historical context here. So, it's July 9th, 1864. This is a one-day battle. Confederate forces under General Early are threatening to advance on Washington DC. Indeed, they are marching towards the nation's capital. Now, in their way are the forces of General Wallace and the Monocy River. The goal as the Confederates in this battle is to get across the Monoxy River, break apart the Union defense, and continue as efficiently as possible your advance on Washington DC. Your goal as the Union forces is to prevent that from from happening. defend the Monoxy River and delay the Confederate forces as much as possible. So, in many ways, this is a unique Civil War battle. We're going to be dealing with finding fords on a river, burning wooden bridges, trying to find rail railroad bridges and stone bridges to cross the river as the Confederates. So, it's got a very unique flare to this, all under the pressure of clearing a pathway towards Washington DC. Before we dive into the details on the game, let's orient ourselves to the big picture look at the game. So, Early Threatens Washington is the 13th game in the Blind Swords series of games from Revolution Games. So, if you like this one, there's a whole world of other
games that you can explore after this. It's a two-player game, but the nature of gameplay makes this a very strong recommendation for solo play. The way the chit pull system works is just I found it really fun and engaging to play these uh solo. The game comes with three scenarios. And historically, this battle, the historical length of this battle is one day, but the game comes with three scenarios. The the long scenario is the whole day of the battle. It starts at 10:00 in the morning. It goes to 6:00 in the evening, and that's the full battle of this day. There also two other scenarios. One is a half-day scenario, which is the one I've got set up here. It picks up the afternoon, the action in the afternoon of July 9th. And then there's also a smaller introductory scenario. Now, the the game length, it's a little bit hard to say from this, but I'm going to guess that introductory scenario is probably about an hour or two to play. This afternoon one that I've got up set up is probably going to be 3 to four hours. And then the full day is 17 turns is and it could end earlier, but roughly 17 turns, but probably that's at 20 minutes a turn, that's about 6 hours or more. So, that last scenario is a pretty meaty endeavor to dig into. Each turn in the game represents 30 minutes and a unit itself is represents a port generally represents a portion of a brigade. So the there are strength points on the unit and each strength point represents 50 men. There's probably an average of say two to eight strength points in a unit. So you could say that probably one of these counters, an infantry counter represents about 250 men historically.
Let's take a look at the components that you get with the game. First up, the game map. So, this is a standard 22in x 34 in uh paper map that comes with the game single-sided. The entire battle and all of the scenarios happen on this map. Now, the north is to the right here, and we can see the Monocy River running all the way down the map, splitting it into a western section and an eastern se eastern section. We can see Union forces to a large degree at the halfway point of the battle here, occupying this eastern section of the map, and then the Confederate forces to the west. Washington DC would be off the southern off the the bottom of the map down here. Really like the look of these maps. They're consistent with other map of this map. They're consistent with other maps and game maps maps in the series. Terrain is really easy to distinguish and that the the balance between the the counters and the maps I think is really elegant and makes for a really clean and efficient gameplay experience. Let's take a look at the counters now. So all the counters in the game are 5/8 of an inch. They're all printed on both sides.
Now, these are the counters that aren't actually involved in the current battle. We'll take a look at those in a moment. We can see all the markers over here for shaken. And then, if we flip these over, disrupted units, as well as there are skirmish orders in this game, too, which is a little bit of a unique element of this gameplay. Now, I've got these all stored in a cube from Eray, which is a very elegant solution for storing wargame counters. I find that it it speeds up setup. Now, disclaimer, they are a channel sponsor. If you do want to take a look at their stuff, there's a link down below in the video description and that link will get you a discount on your order. So, if you want to check them out, they can be fun. Let's take a look at the counters that are out on the map now. Let's dive in a little bit deeper with one of the units here. So, let's take a look at this TRX 151st New York volunteer infantry unit. The number in the bottom left represents the strength points, eight. Each one again represents about 50 men. So, you can assume that there's about 400 men in this unit. The bottom right represents the cohesion rating. Basically, the Elan and the experience of the unit and bigger is better for both of these numbers. A higher cohesion r rating is better and a higher strength point number is obviously better as well.
Lastly, we have this little R to the right of the eight that represents the type of weapons they have. This is in this case rifled musketss. Now, note also too that we've got a couple of units over here that are a different color. These units have already been battleworn. they're flipped over to their weaker side because this battle the scenario that we're looking at here is the the afternoon scenario. So the battle's already gone on for a few hours and some of the Union units here have already been battleworn. Likewise, we have up here McCostland has some cavalry up here. We can see the horses there that are also in their battleworn state from the morning fighting. Let's take a look at the documentation that comes with the game. Uh the Blind Sword series games generally come with two rule books. You have the series rules which has just been updated to version 1.5 in this year 2026 and then the exclusive rules which represent the unique rules for this particular battle in the series. If we look at the general rules here we can see there a relatively modest 16 pages of rules. There is a good bit of text here but with a series rule that's not this again is version 1.5 of the rule book. So I would say you know one of the nice things about this is that the the rules are very mature. a lot of the questions and ambiguities have been cleaned up. So, uh it's a very nice and elegant rule set. I would give this probably on the whole this particular battle in the series probably a four out of 10 on the complexity scale. Some of the rules around disruption, movement, close combat are a little bit, you know, they have a little bit of heft to them, but by by no means would I say this is a very complex uh war game. Now, these are the exclusive
rules. This is where you have things that are unique to this particular battle. In this case, one of the things that we're looking at that's unique to this battle is all of the elements around the Monoxy River. The burning of a wood bridge. Confederate forces have to find a ford across the river. There's some special rules for crossing the railroad bridge and attacks across the railroad bridge. Uh there are some skirmish rules as well that are unique to this battle. So other than that, there's not too much here that I think is is very unique in the series. So, in terms of comparing this to other games in the series, maybe slightly more complex than average, but for the most part, I'd say this is an average complexity for the Blind Swords series. Let's say a brief word about solo. I'm going to give this a seven out of 10 on the solo rating. There is no solo bot, so you're playing both sides, but the way the chitpole system works, I feel like it just keeps throwing fun challenges at you that you just can't quite predict no matter which side you are. So, it forces you as a solo player to react to what you're seeing in front of you and try to make the best decision for that particular activation within a turn. I find that just really fun to play solo. So, a very strong 7 out of 10 for a solo system for this two-player game. Early Threatens Washington comes with a couple of combat results tables that are uh these are identical.
Basically, the same thing is on both sides. So, you get one for each player, which is really nice. These are the combat results table up here. And then they often result in what are called cohesion tests basically to see whether a unit breaks or can sustain its strength in battle. So you're going to be calculating the cohesion the battle is up here and then that's going to put you to this page which is going to see if that unit will survive. And there's also a terrain key on the right hand side. Other plays there's a terrain effects chart in a sequence of play that is identical for both sides. Then on the back side of this this has the confederate event descriptions. So, the game models events through the use of these chipped tokens. And basically, they're going to go in a cup that has all the leader activations. We'll show how this works, but when you pull these out, you need to know what what events happened. So, this is where all of the events for each side is listed. It tells you how to put those into play. Things like heroic stand and rally and confident or rebel yell, which uh create a unique flare oftentimes to each particular play of the game that you have. We also have a turn record track that tracks the turn in the game. Again, each one is a half an hour implement and you have broken units that are tracked down here. And this battle, the afternoon battle, starts with some units already eliminated. The game also comes with these activation displays. This is the unions one. These are used after a unit is activated in a particular turn.
You, for example, flip this over to mark that it's been activated. In this UK, you can see very clearly which units you have left to activate and which ones have already finished their actions for the turn. Lastly, the game comes with two dice. Dice are used for combat results and cohesion checks and certain things other things within the game. We've seen the components. We've talked about an overview. Let's jump in and talk about this battle and what's going on. So, it's the middle of the afternoon. This is the afternoon scenario. The battle's gone on for about four or five hours already. It's 2:30 in the afternoon. We've got Confederates largely to the west of the Monoxy River and then Union forces largely to the east of the Monoxy River. And let's talk about what each side is trying to do. By far the most pivotal element of victory in this battle is the Georgetown Pike. And we're looking, it starts up here in the north. It runs all the way down here. It crosses the monocasy here, but this bridge has been destroyed. Then it goes down this way running off the southern end of the map. Basically, there's a little arrow that says to Washington that way. The control of the Georgetown Pike is defined as anything to the east side of the Monoxy River. So starting here, running along the pike all the way down to this hex 2734 and then two hex's on either side of it.
So the Confederate forces are trying to carve a channel out basically of this Georgetown Pike as well as getting control of the eastern side here of this railroad bridge. So if they can do that, the Confederate forces are well on their way to victory. There's a couple of other things. To get a decisive victory, they have to clear all Union infantry forces off the western side of the Monoxy River. And we can see some Union forces up here on the wrong side, at least for the Confederates perspective, of the Monaky River. So they need to drive those across as well. And as well, for a decisive victory, they need to control this stone bridge right here. And indeed, the first problem the Confederates have to solve is how can they get across the Monoxy River, especially in the afternoon scenario. The bridge has been destroyed as historically the Union forces burned it down. So there's a crossing point here, a stone bridge, and we can see Union forces in the way for the Confederates.
Confederates outnumber them a little bit. Can they take these forces, push them back, and cross the stone bridge? There's also a ford right here. Part of Tyler's brigade is defending that. There's also a railroad bridge right here. Part of Tyler's Brigade, spread very thin, is defending this as well. Wooden bridge is destroyed. The Confederate forces have also found a ford up here and they have a large number of troops masked up here. These are um Gordon's units that have just shown up at 2:30 in the afternoon. So from the Confed Confederate perspective, we've got to figure out a way across the river, hack our way through these Union forces, and somehow over the course of the next 3 and 1/2 hours carve a channel out of this Georgetown Pike, as well as clearing out some of the other victory conditions necessary for a decisive victory. the Union forces can get victories basically by denying the Confederates control of the Georgetown Pike and holding on to one of these hex's right down off the south. This is the the railroad here, the the Baltimore and Ohio railroad controlling one of those as well as this Baltimore Pike on the east end of the map too. Not letting the Confederates get to that. But the biggest battle right now for both sides really is to this Georgetown Pike. And so that's what we'll focus on. So, I'm going to jump in and and start playing.
And as I start to play, I'm just going to highlight the three big things that I want to show. I want to show basically how activation works, how combat and close how firing works, and then how close combat works, as well as some of the aspects of maneuvering. So, you get a sense for how these games play. Now, as the Confederates, um, we're going to do a couple things. I think we're going to try to come across and force get across quickly here and push our way through this. There's a lot of fences up here, but try to push our way through this landscape to get through the Union forces. Meet them head-on. Try to sort this all out and get through. We also have a number of artillery units that I think we can sort on this side of the river and hopefully lay down some fire on the Union forces there to weaken them. We've got this number of forces here. I think we're going to detach one brigade and try to have it race down. See if we can get across the ford here, push everybody else here, see if we can take on Tyler's brigade here, and perhaps work our way across the railroad bridge. We have superior numbers up here for the Confederates. So I think it is basically try to roll over more of Tyler's brigade up here and get across the stone bridge here. If we can get across any one of these three places, we can also probably put a lot of pressure on these Union forces trying to hold the Pikeway by engaging the forces coming across here. So if we can get them from two sides, that would work out. Now thinking from the Union perspective, we have a lot of work to do. Uh, I think Tyler's brigade is going to have to do the job of holding whatever Confederate forces come down here. Likewise, I'm hoping they can hold this railroad bridge and delay the units here. We do have some artillery up here on this hill that can help out with that. I'm a little bit worried about over here. We
might need to eventually divert some forces to help protect the stone bridge. And I think we might actually try to retreat across the stone bridge rather than trying to regrade the con invade engage the Confederate forces here because I I think they're going to roll us over and that would make it hard to defend the stone bridge. So I think we might fall back and see if we can hold the stone bridge from this way. I also we don't have much artillery here at all for the Union forces. We've got this artillery unit here. Is that it? Oh my goodness. We have basically no artillery here for the Union forces. So yeah, I think we'll leave our artillery there. Um, then down here, I think we're going to try to push forward and just make these new units grind their way through this rather this defensive terrain's got streams and fences. It's good defensive terrain. I think we're going to try to push up into here and really make the Confederate forces earn their way through uh toward the east from anything they try to get across the river at that ford. That's a rough plan for both sides. I'm going to jump in now. Let's take a look. I want to show how activations work in the game. So, let's take a look at how the chitpole system works in the game. So, one of the coolest things that I like about the blindsword system is its chit pull activation system. And basically, at the beginning of every turn, so at the beginning of this first turn, we're going to figure out what chits are going to go in this cup. And then throughout the turn, you just pull through the chits in the cup. And whatever chit gets pulled out, that's what you do at that particular moment in the turn. Now there are some exceptions because you can hold some event chits for later and things like that but for the most part that's
the way the system works. Now what always goes almost always goes in it can be different for a different scenario in the system but fortunes of war basically is a random event kind of thing and fog of war means prevents a later chit from being activated. So we're going to drop those in the cup. Then we're going to figure out what leaders go in the cup. Now these are the the Union division leaders. So they are going to go into the cup and this is the commander-in-chief Wallace of the Union. So he goes into the cup that provides a special activation for the Confederate forces. Early is the commander-in-chief. He goes into the cup and then we have the division commanders here for the Confederate forces. Now in the afternoon battle, Gordon is the in charge of all of the reinforcements that just arrived. So there's a special rule that says this is the first chit that gets pulled in the first turn for the Confederate forces in this scenario. And when you pull a chit, you see this little number here that is a four. You have to roll that number or less in order for that group of units to activate to actually be able to do something more than just a basic action that symbolizes lost orders and chaos and battle and different elements like that. So Gordon is going to activate his units whenever he gets pulled out in this turn. We don't have to roll for his activation the first turn. So I'm going to keep Gordon to the side because he's automatically the first chit. Now one of the fun things we talked about are these event chits. Each scenario will list which events are included in the event pool. And then generally speaking, it might tell you you have to include a couple of chits or you have a choice. And in this scenario, these are the Confederate possible chits
and these are the Union possible chits. Now, the way it works for this scenario is the Confederate player gets to pick two that he definitely wants to or he or she wants to definitely include in the cup for this for this scenario, for this turn. And so for the Confederate forces, we definitely want brigade reserve movement. This is going to allow us to move some of our units double like twice in the same activation, which is going to be really fast and we can get units forward fast. So I think that's going to be helpful. And then I've been looking at that cavalry that is uh already uh basically worn down. We're going to use the rally chit here to try to get them back up to full strength in one case. So these are going to be the two automatic ones that we're throwing in for the Confederate forces. Then we're going to pick two random chits for Confederate forces, too. So basically, I'm just going to put these all together in my hand, randomly pick out two, and dumping them in the chit without looking at them. All righty. So, I randomly put two of those chits, and I've stacked the rest of them off for there. I can't look at them for the next the next turn. The Union forces are going to get one.
Likewise, I want to see if I can get some of Trux's infantry back into the battle at full strength. So, we're going to try to rally one of those units to rebuild one of those units. So, that's going to be the automatic for us. And then, we're going to take two random ones from these are here. Without looking at them, we're going to dump them in the cup. Now, normally you wouldn't look in the chit or show this in any sense of the way. This stays hidden, right? You randomly blindly pick them out and you don't quite know what's in there for those random ones. Uh, but you end up with basically a cup that's got all of the chits for the turn in it. Then, basically, you're going to pull one of these out in its moment and you're going to activate some of the units from this division commander. Now, Gordon is automatically the first one pulled out for this turn. So, we're just going to put these off to the side and then we're going to go activate one of Gordon's brigades. So Gordon is in charge of Evans brigade, York's brigade, and Terry's brigade up here. All reinforcements coming into the on the western edge of the battlefield. So we are going to actually activate Evans brigade up here first. And usually we'd have to roll a dieice again to get a four or less to activate one of these.
But uh this is automatic for this first turn for the Confederate forces because these are reinforcements streaming towards the battlefield. After we finish the activation for Evans Brigade here under Gordon's division, we'd come up here, flip it over, and that lets us know that we've activated that unit for this turn. So, I'm going to start playing now. I'm going to play ahead a little bit in this turn, and then I'm going to stop at one interesting point, and we get an interesting activation so I can show some movement, some fire combat, and maybe some close combat. And I think I know we're going to be able to do that. So, I'll be back in a little bit. So, I've played ahead a little bit here in the first turn. Confederate forces have gotten Evans Brigade across the ford. and then were able to use the they got a lucky brigade reserve movement event that allowed them to keep moving on. So, they have really pushed all the way up here to almost to Worthington's farm, gotten past some of the fences in the hills, preventing the Union from taking these defensive positions. Now, uh, the Union forces, however, Trux's brigade and Mlendin's brigade here, cavalry have moved up in defensive positions to try to form a Union line to to hold them back to the the other side, the west side of the river. Got the Confederate artillery that's masked just behind the railroad tracks here. They're going to try to open fire and pound Mlennon's division brigade here that's on the other side of the the Monakasi River here. Hope to beat them up and maybe sneak units down here, eventually getting to the destroyed bridge. So the battlefield is starting to take shape down here in the in the southern end in the center.
Things have been relatively quiet. Ramser's division here had some order confusion and weren't able to activate outside of Lily's Brigade which has come at pace down along the Monoxy River here trying to get torums ford to see if they can cross here. I did bring down a couple of um some cannon here too. We're going to try to pummel these units with artillery and then push across the ford to see if we can get across there as the Confederates the Union forces. As the Union forces, we really haven't activated Tyler's brigade yet. So, they are waiting for their orders. And that brings us to the northern end of the battlefield here. We want to show movement, fire, combat, and then close combat. So, Road's division up here just activated. They have two brigades, Cox's brigade and Cook's brigade. And we are going to activate Cook's brigade. Now, when you activate a brigade, you have a number of different orders you can give it. So, there are four types of orders you can give a brigade. attack, defend, maneuver, or regroup. They're somewhat self-explanatory. Regroup is when your units are beat up and you want to try to rally them or bring them back up to full strength. Maneuver is when you want to go fast, but you can't go, you can't engage with an enemy unit under a maneuver command. So, in this case, we're not going to use that. Defend is when you want to hold your position and basically just get some defensive advantages to firing at units that are there. And then the one we're going to use is attack. attack lets us move and then engage with enemy units and potentially use close combat on them.
Now, once we do that, each one of these phases starts out an attack phase starts out with a progression of actions that you can do. And the first action you can do in an attack phase here is fire combat. And basically, we could fire at these units if we were within range. But we're not. These are too far away. We have rifled musketss and they have a maximum range of three. So Cook's brigade can't use the fire combat action of their attack order at this point. But now we can move. Now the the number of movement points you have varies depending upon the the type of order you give. For an attack order, you get four movement points. So we can move each one of these units in Cook's Brigade four movement points. Now we'll notice here this is all flat terrain. This is a slight slope upwards, but it's so um shallow, so soft, and so gentle that it doesn't impact movement here. So, let's get the fourth Georgia down here. One, two, three, four. And our rough goal here is see if we can turn the Union flank here. See if we can beat up Tyler's brigade. They have a better cohesion than our units. They a little bit stronger than us, but we outnumber.
We have three units here coming at them. Likewise, Cook 1, two, three. Again, that extra slight bit of elevation doesn't impact their movement. Then Cook here again, the 21st and 44th Georgia combined. It's going to go directly 1, two, three, and take them at this point. So now it comes time after the movement phase to designate for close combat. We're going to have all three of these units go close combat against the 144th Ohio Volunteers holding this spot right next to what is it? P Reich's farm here. So the first thing that happens now is the 144th Ohio Volunteers gets to designate defensive fire. They can fire at any one of these three units. The question is, do we want to try to take out this one coming around our flank to the east or do we want to try to take this one out on the north? And the reason why I want to do this, there's flanking fire. If we if a unit if two units attacking are separated by a hex, there's flanking fire, which is going to give them a bonus. So, we would like to ideally knock out this unit or this unit to prevent the other two units from getting a flanking fire bonus on us.
With that in mind, they both have the same cohesion. Let's take out this stronger unit. I think that will help us. So, we're going to fire the 144th Ohio Volunteer is going to fire here at the 21st and 44th Georgia unit that's coming right at them from the west. Defensive fire is conducted as regular fire. So, our attack strength, our strength points here are six. So, we're going to start out on the we have a big chart here in the combat results table that says total strength points, and we're starting out at the six and seven column. Now, we have a bunch of combat shifts. If we look at this combat shift chart, we can see there are a ton of combat shifts here. This looks intimidating at first, but after you execute combat a few times, you realize that most of the time, like 60 70% of these don't apply to combat. But we'll take a look at this list right now. And if we look down this here, you know, good unit event that's not there.
Fighting, we're not in a skirmish mode. There's no woods involved. So, if we go down all of these fire combat shifts, not a single one applies to this defensive fire. So, we're going to have total strength points of six, and we're going to fire on this chart. Let's see what results we get. We read the red die first, looking for big numbers. That's not very good. A 26. We're going to read across here and we get a 26 is a green 0 to2. Now there are levels of cohesion checks. Red is the hardest to pass. Yellow is the next dangerous. Then green is a mild cohesion test here. So we didn't fire very well. The 144th volunteers did not hit their their targets very well. If a the attacking unit had a if the the unit you're firing on had a cohesion of zero to two, it would have to take a green cohesion test. However, if we look at Cook's unit right here, the 21st 144th Georgians have a cohesion of three, and there are no modifiers that apply to this right now. If a unit is isolated, doesn't have one of their uh units from a brigade adjacent to them, it's reduced by one.
That would have done it. But they have a unit right beside them, so it doesn't impact their cohesion. It stays at three, which means that the defensive fire here from Tyler's brigade uh was completely ineffective. So, now we're done with defensive fire. and we go to close combat. So, let's walk through how close combat works. We don't total up all three units when we do close combat. One unit has to be designated as the lead unit. So, let's have the 21st and 44th Georgian be the lead unit. They're the ones that are leading the assault on the 144th Ohio Volunteers. So, we're going to use their strength point number and we're going to go right back to the same combat results table, which results in a five was our starting point. But now let's take a look at the close combat shifts we have. Oh, we're also going to designate these other two units as supporting units which impact the combat in a different way. So we have a combat strength of five right here. But if we look down here, we see close combat shifts. And this is the outnumbering part. Outnumbering by three to two, it's a one column shift either way. We have to see whether the defender outnumbers the attacker. And for close combat shifts, we use the total attack strength. So we have 13 to six, which is 2:1 in favor of the attacker. So when we come down the combat shifts table, we can see outnumbering 2:1 is going to be a two column shift to the right. So instead of using the two the five column, we're going to shift all the way up to the eight or nine column. Now we can run down the rest of these. The next
one we come to here is higher cohesion rating than the enemy. And in this case, the Union forces have a higher cohesion rating than the attacking lead unit here. Cooks 121st 44th Georgia. So this results in a one column shift to the left in favor of the defender. So we're back on this 67 column of strength points. Now there's no that the slope here is if the slope is steeper. So the slope line doesn't matter. Looking through the rest of these, the only one that's going to matter here is when we come down to the flanking attack. In this case, we do have two attacking units separated by a hex. So, the Confederate forces are going to get a two column shift for a flanking bonus. That's going to take us from the 67 column all the way up to the 1011 column. This should be a pretty good attack here. However, the Union's forces cohesion rating is pretty high at a four. So, here come the Georgians.
They're attacking the the Ohio defending. Oh, that's pretty brutal. We get a 63. We are on the 1011 column here. A 63 gives us a yellow cohesion test. A yellow cohesion test if the result if the defending morale is three or four, which it is. So, we're going to flip over to the cohesion test tables. Now, what's unique about close combat? Close combat uses a different cohesion test table than for fire combat. So, we're going to use this clo close combat cohesion test table. We're going to go down to the tough box. We're going to roll two dice again to see what happens here. We get a 16. So, let's walk through this result here. The first thing that we're going to look at is the depletion result. This basically means casualties incurred. The role is a one, which isn't a good role for the attacker, which means that there is no direct casualties caused by this attack here. So, that part's done. That's easy.
Then we look at the scadattlele result, which is a six. This is a high good result for the attacker. Bigger numbers are better for the attacker in these close combat cohesion test tables. And we can see we've got three things, BT, RA3, and P2. BT means a break test. So this attack was so ferocious that this unit could completely break and get shattered in combat. R A3 retreat all units in the defending hex. Three hex's. So this was they're panicking. This unit is is is fleeing the battle. They've taken a ferocious attack. And although they didn't suffer a lot of casualties, mentally they're giving up the field. And then we also have P2, which is panic 2, which means two nearby units could panic. In other words, this unit is pulling out so fast. The attack is so ferocious that it could cause other units nearby this unit to panic. So let's take each one of these three things in turn. The first thing we have to roll is for a break test. And this uses this break test table and we're going to compare the result against the unit's cohesion. What we're looking for for the union forces is the cohesion rating or less. We get a three which is less than the cohesion rating of a four which means that this unit is shaken and disrupted. Now, the game comes with these shaken and disrupted markers that can you drop on top of a unit, but I actually like these uh clear bingo chips instead because they allow you to see through the unit. So, I put a yellow one on there to indicate it's shaken. I use red for disrupted. And so, that takes care of the break test results. So, this
unit, its morale is broken a little bit. It's down to a shaken state. Let's go now to the RA3, which is retreat all units in the defending hex three hex's. So we we can we have a retreat path away down here towards the stone bridge. Uh we if possible we don't want to retreat next to an enemy unit. So that means our path is going to be 1 2 3 away here down to the stone bridge. Now we also have to check uh for units that could panic in this case. And the that's the last part of this result. Uh panic applies to any unit that was also in the defending hex. And had there been one there, we would do that before we do the retreat. um or in an adjacent hex. Now, there's nothing in the defending hex except the original unit that took the brunt of the attack, but this unit here is adjacent to the defending hex. So, we have to check to see if that unit panics. Now, the unit would panic if it the the co panic does not apply if the cohesion rate of the unit is greater than two. So, only units that are cohesion rating of two or less would have the potential to panic. And because Tyler's brigade here is an experienced veteran unit, they do not panic. So, that takes care of the combat results. We've done the depletion result, the break test, the retreat all, and check to see if any unit panics. The last thing that can happen is that these Confederate units can advance into the square. Now, also, because Tyler's brigade retreated two hex's or more, they have the option to advance two hex's. And I think we're going to do that for some of the unit. Let's bring Cook's unit up here into this hex. The
next advanced hex can be anywhere, and they don't suffer any opportunity fire. So, we'll go two for him. Let's go one for Cook's brigade here. And let's put some more pressure on by bringing this one up. One and then two like this. So, we have the Confederate forces having launched a very successful attack here, driving away Tyler's Ohio brigade here down towards the Stone Bridge and putting more pressure on the right flank of this precarious Union defense. So, and with that, we've concluded this particular activation of uh Cook's brigade. Tyler's 144th Ohio Volunteers took a ferocious close assault attack, retreated down towards the Stone Bridge. Cook's Georgia units here brigade have pushed up along the eastern flank, putting pressure along the re the rest of Tyler's brigade here, and Cox's brigade is ready to go. Now, it' be interesting to see which one activates next. And what would you do as the Union forces with Tyler's brigade? like would you bring him down here and try to get them across the river? Would you try to hang on to this hilltop? What's Cox's brigade going to do when they activate?
So, you know, each one of these little situations in the game in the battle becomes very interesting as its own little conundunder and the timing of activations means the challenges you face on either side are totally different. If Cook can get their orders off first and follow immediately before Tyler can react, this could really put a lot of pressure on the Union defense. But if the Union, if Tyler can get his brigade going, then perhaps they can rectify the situation, get across the river and set off a defense over there, or perhaps strike back and maybe push back some of the Georgia forces here. So, interesting decisions all around. And so, with that, we've seen a a good bit of gameplay. We've seen how the activation system works, how movement, fire combat, and close combat work. Um, I'm really liking my initial impressions of this one are very strong. I this the river creates some very interesting tactical decisions for both sides. You know, where do you commit units and eventually I mean fairly soon the Confederate forces are going to be across the river here in this section.
But I suppose if you play the full day scenario where they end up crossing could be very different depending each time you play it and how forces commit units. So, this is going to be an interesting battle in this one because the Confederates are going to have to fight their way down through here, pushing the Union forces back. How the artillery plays out here, like, do we leave McClennon's forces here as the Union? Can they defend this area and withstand this artillery barrage or does it make sense to concede this channel? Perhaps pulling them behind the hill here, giving the Confederate forces room to move down this channel along the river. I mean, just lots of interesting tactical decisions. Where do you try to fall back behind the river to defend? Where do you attack as the Confederates? Um, I'm liking the decision space for both sides. It feels like even though the Union forces are fighting a defensive holding action here, they have a lot of interesting decisions. So, this one, my initial impressions here of Early Threatens Washington are very positive. Looks like a good game in the system. If you've enjoyed this video, uh, I have another video that does an overview of Gettysburg: The First Day, which is another game in the Blind Swords series. I'll put a link to that one right here if you'd like to check it out. Happy to answer any questions that you might have. Thank you for watching.