Shards Of Creation (From Brandon Sanderson's Cosmere) - How To Play
Transcript
Hi and welcome to Watch It Played. My name is Rodney Smith and in this video we're going to learn the two to four player game Shards of Creation, designed by Hayden Dillard and published by Brotherwise Games who helped sponsor this video. Set in the fictional universe of Cosmere, which was created by best-selling author Brandon Sanderson, here you'll take on the power of gods as you seek to dominate and attempt to overthrow your opponents. Or at least get the most points. So, join me at the table and let's learn how to play. To set up, first familiarize yourself with what are known as the game's shards. These are groups of cards that all share the same name on their fronts. For example, this is the Honor shard. Each has what is known as a reference, trump, and 16 playing cards which have a rank number in their top left-hand corner. Those numbers are also listed on its reference card here. So, this shard has values from zero to 16 with no value nine. On the other hand, the reference sheet for the Preservation shard shows that it has 15 eights and one 16. When setting up, you'll select or randomly choose a certain combination of shards based on your number of players as shown in the rulebook and here on screen. In this video, we'll assume we have three players so we need four shards and we'll collect Odium, Preservation, Honor, and Ruin leaving the rest in the box. But, each time you play, you can try a different
combination for a different experience. Put each shard's reference face up on the table where all players can easily see them and then gather the trump card from each chosen shard and shuffle them together into a face-down deck. The 16 playing cards that make up the rest of each shard's deck are then shuffled together into a face-down deck nearby. Finally, give each person one of these scoring aids flipped to the side for your number of players. So, here in our three-player game, and that's the setup. In Shards of Creation, you and the other players will be engaging in a style of play often referred to as a trick-taking game. If you're not familiar with those, do not worry. We'll go over everything you need to know together.
The game is played over three rounds, and before each round, there are a couple of steps you have to follow. First, draw and reveal the top card of this trump deck. We'll learn about how this affects gameplay a little later, but next, deal each player a hand of 11 cards from this draw deck. You can look at your own cards, but keep them a secret from the other players. And now we're ready to play the first round. A round is made up of what are known as 10 tricks. During a single trick, each person will play just one card, and the first person to go is known as the lead player. For the first round, the lead player is chosen randomly, and we'll just assume it's me. I now pick any one card from my hand to play face-up into the center of the table. This is known as playing a card into the trick.
These cards are also referred to in the game as shards, each coming from one of the sets we shuffled into the deck during setup. The set shown on the first card played into a trick is known as the lead. So, here, honor was led for this trick. Now, going in clockwise order, each other person must also play a card into the trick, and their shard must match the type that led the trick if possible. This is known as following the lead. Honor was led, so now this player is next, and they can pick any of their honor cards to play. Why you might choose one over another will make more sense once we know more of the rules, but we'll assume they picked this one to play into the trick. Now the next player goes. They don't have any honor cards in their hand, and when it's impossible to follow suit, you can then play any card you have. So, maybe they choose this one. After each player has added a single card to the trick, you check to see who won it. The winner is the person who played the highest rank in the lead suit. Here, I led with an honor card, and this was the honor card played with the highest rank, so this player wins the trick. Notice this shard has the highest rank value, but it is not from the honor shard set, so it cannot win the trick. Once you've determined who won the trick, that player picks any one of the cards played into it to collect. Let's assume this
winning player chooses this shard. They take it and put it face up into a personal scoring area in front of themself. These will earn you points at the end of the game, as we'll see, and cards you collect should be displayed so everyone can see all of them. Any leftover cards in the trick are then put into a shared discard pile. Then the winner of the last trick plays a card from their hand as the lead, and each other player in clockwise order follows the lead if possible. And you'll continue playing tricks with the winner of each trick adding a card from it to their scoring area, and then leading the next trick. But remember, I said the highest rank played in the lead suit always wins the trick. But what if there's a tie? Here, this player led the next trick with an Odium card, and we'll say that this player didn't have one, so they played this instead. And then when it came to my turn, I was able to follow the lead and will say I played a a nine.
Here we have a tie for the highest ranked card in the lead shard. In that case, the tied player who played their card the latest wins. So, that would be me in this case. So, that covers ties, but there is one other way to win a trick. Here, we'll say I was leading this trick and I led with a ruined shard. The next player doesn't have a ruined shard in their hand, so they can play anything they like and maybe they play this Odium shard. We'll assume that the next player does have a ruined card and they must follow the lead of they're able to, so they play this. Normally, the highest card played in the lead shard wins. But remember, at the start of the round, a card was revealed from this trump deck.
The shard it shows is known as the trump shard. And the highest ranking trump played into a trick always wins, no matter what was led. So, that means this player instead won the trick. Remember, they had to follow the lead shard if possible, but they didn't have one, so they were able to play a trump and win the trick. As normal, they would add a card from this trick to their scoring area and the rest would be discarded. They would then lead the next trick. And I should point out, you can lead with trump. This would just force every other player to follow with trump shards they have, since you always have to follow the lead if it's possible to. To summarize, when checking to see what wins a trick, it's the highest ranked trump shard. If no trump was played, then it's the highest rank from the lead shard. And if there's a tie for the highest ranked winning shard, the tied card played latest into the trick wins. The revealed trump card doesn't just indicate which shard is trump for that round. It also has a special ability in the area here. A A trump's effect is active for the entire round it's revealed in and these can take effect at different times. For example, this one is resolved at the end of the round. On the other hand, this trump effect is resolved at the start of each round. Here's a trump effect that creates a restriction on what shards can be led during a trick. While the owner shard has no trump ability at all. We're
not going to go through all the different trump effects as how they work is printed on them. But we'll learn the odium effect when it would resolve at the end of the round so you can see an example. Before that though, we also need to talk about shard abilities. Let's assume this player leads a trick with a preservation shard and then this person follows the lead with this preservation shard. Notice, it has a printed effect in the area here. This is an ability. Abilities resolve immediately after a card is played. This says, "Draw a card then discard a card." So the person who played it would immediately gain a new card from the top of the deck and then they discard any card in their hand which could even be the one they just drew. Now be aware, if you had need to draw a card and the deck is empty, just reshuffle the cards in the discard pile into a new deck and continue drawing what you were owed.
That said, after a card ability is resolved the next player in clockwise order plays into the trick as usual and let's say I follow with this shard which also has an ability. This says that it's card's rank is plus one for each preservation card in that player's scoring area. Let's assume I had nine preservation cards in my scoring area. That means this card's rank becomes 17. When an ability changes the value of a card, that new rank is maintained until the card is transferred to a scoring area or is discarded. So now, I would win this trick. We won't go through all the card effects because how they work is printed on them. But if you want to see some of the abilities you might encounter when playing, you can pause to read the ones I'm showing you here. And remember, each time you play, you'll have a different combination of shards, so you'll have different combinations of abilities. If an ability has a dark background with light text, it's a scoring ability, and that means it will only take effect at the very end of the game, not while tricks are being played.
Each shard has a reference card, and it will list the abilities you'll find within its deck, as well as a distribution of that deck's ranks. I should mention, if an effect requires you to make a choice, you must fully resolve that choice before the next card is played. Also, if an ability does not have a valid target, you just ignore that aspect of the ability. All right. Tricks will continue until you've played a total of 10 of them. This will leave everyone with one card left in their hand, which they add directly to their scoring area. This ends the round, unless there is a trump effect that would then resolve. We had Odium in play during our example round, and its ability resolves at the end of the round. Here it says that at that time, if one player has fewer cards in their scoring area than every other player, they take any one card of their choosing from the player with the most cards in their scoring area. So in a case like this, both of these players are tied for the least number of cards in their scoring area. So neither would get to steal a card. But if only one player has the least number of cards in their scoring area, they get to take a card from the player with the most. And if there's a tie for most cards in a scoring area, then this player could take a single card from either one of them. So, after 10 tricks have been played and each player's leftover card has been put in their scoring area and any end of round effects have been resolved,
you begin a new round. Just as before, you reveal a new trump card. This shard will now be the trump for round two and its ability will be in play. The old trump card is completely ignored moving forward. Then shuffle the discard pile into the draw deck and deal each player a new hand of 11 cards and begin playing tricks again with the person who won the last trick of the previous round leading the first trick in the new round. After the end of the second round, you'll then play the third round. Once you get to the end of the third round, the game ends and it's time for final scoring. Here, you look at all of the cards in your scoring area and if any of them have abilities with a dark background and light text, these resolve now. And if you had more than one, you'd resolve them in any order you choose.
For example, if we had this card in our scoring area, it says we subtract two points from our score. So, this is not a card you want to have. As I've done here, you should organize your cards into matching shard groups and count the number of cards you have within each one. Then compare that number to the values found on the scoring card. For example, if we had four Odium cards, we would look here and see that having four cards from a shard set is worth 10 points. You do this scoring for each different set of shards you collected. So, if I also had eight Aether shards, then as it says here, they'd be worth 36 points. After totaling your score from each type of shard you collected, you also score points for each full shard set you have. A complete shard set is when you have one card from each of the types you're playing with in your game.
In our case, it means having one of each of these four different types. A set is also known as having resonance. So, here I have one, two, three complete sets. If I had another one of these preservation cards, then I would have four complete sets. As it says on the scoring card in this area, a single set is worth five points, but having three sets would be worth 20 points. And if you have five sets, that's worth 80 points. It is possible, though rare, to collect six complete resonant sets. And the designer informed me, if you have that many, you're probably going to win. But if you want to know your exact score, just give yourself double the value of having five sets, so 160 points. And be aware, the scoring we see here is for two and three-player games. But if you have a four-player game, use this side of the scoring card instead. And remember, you'll be using five shard sets. So, a resonance would mean having one of each of the five sets you're playing with. When scoring, you'll likely find it easiest to lay out your cards like this, with shards from the same set overlapping in this way. Then you can quickly count up how many you have in each for shard scoring, but also easily see how many complete sets you have by checking for full rows when it comes to resonance scoring. Either way, you record the points you've earned for each shard group and resonance on the included score sheet, and the player with the most points wins.
If there's a tie, the tied player with the fewest cards in their scoring area wins. And if there's still a tie, the tied players share the victory. And that's everything you need to know to play Shards of Creation. If you have any questions about anything you saw here, feel free to put them in the comments below, and I'll gladly answer them as soon as I get a chance. You'll also find forums for discussion, pictures, other videos, and lots more over on the game's page at BoardGameGeek, and I'll put a link to that in the description below. And if you found this video helpful, please consider giving it a like, subscribing, and clicking that little bell icon so you get notification anytime we post a new video. And if you'd like to support the channel directly, you can join my Patreon team, which I'll have linked below. But, until next time, thanks for watching.