Skip to main content
Loading video...

Wilderness 1864 Overview | American Civil War Board Game | Worthington Publishing

Transcript 18:02

Hi everybody, I'm Zilla Blitz, and welcome. If you like the American Civil War and are interested in accessible war games with a relatively modest rule set, Wilderness 1864 from Worthington Publishing might be something for you. Now, this battle was the fifth bloodiest battle in the American Civil War and fought in dense wooded landscape, which largely negated the use of cavalry and artillery. Let's jump in right now and do an overview of this game. So, I've got Wilderness 1864 all set up to play scenario six in the game, but before we do that, let's do a broad picture overview of this game and indeed the series that which it within which it sits. So, Wilderness 1864 is volume seven in Worthington Publishing's American Civil War Brigade series, which is designed as a low complexity, easy to access tabletop war game series that lets you refight the great battles of the American Civil War. Now, the games in this series are all two-player games.

There is no solo bot for the games, but they are very solo-friendly because there really isn't any hidden information that one player is hiding from the other player in any sense. Now, this game here, Wilderness 1864, covers the full two-day battle of Wilderness in Virginia in May of that year. Now, the gameplay length varies greatly. There are 13 scenarios in the game, and there are two maps. We're looking at one of them right now. If you put both maps together and play the full two-day campaign game, the gameplay length for that one is listed as 8 to 15 hours. The shorter scenarios, the one-map scenarios that only part of a day last anywhere from two to six hours, and indeed I've already played this scenario once and it took me about three hours including learning the game. There are also a lot of medium scenarios in the game that are, you know, one map for the full day or both maps for half a day, and those the gameplay length is listed as six to 10 hours. So, you've truly got a range of scenarios and a range of gameplay lengths in here. A turn in the game is one hour long, and this scenario here indeed will take 5 hours of historical length to play, starting at 4:00 in the afternoon and finishing at 8:00 at night. The counters in the game represent brigades and individual leaders, so that gives you a little bit of an idea of the scope of the game, too. Let's do a quick tour of the components. The game comes with two mounted 22-in by 34-in maps. This, as we can see, is very inappropriately named battle Wilderness. We've got a lot of

woods here, and we'll talk about that as we start to explore gameplay a little bit. Now, this is the northern map. If you bought the southern map, which I'll show right here as well, also a very woody map. If you bought them both together, you get a a footprint of 44-in by 34-in, and that would be used for like the the scenario that covers the first day on both the north and south maps, the second day on both the south and north maps, or the full campaign game that does both days of the battle on both maps. But again, more than half of the scenarios only use one map. Really like the color footprint on these maps and the design. They really capture this congested, woody, hard to fight just a really rugged landscape that the the the belligerents will be fighting on. And let's take a look at the counters now, which we've got set up here on the map. We can see the Union forces on the right here and the Rebel forces, Confederate forces, on the left.

And mostly we have leaders, so for example, Sedgwick we can see here on the horse. We can see Wright on his horse and Robinson on his horse. And then underneath we have the unit itself. And and again, this battle fought in dense woods, it very much negated the use of artillery, although there is some artillery in the game, and then any significant use of cavalry. So, cavalry is not modeled in this game. Now, if we look take a closer look at the counters here, we can see that each counter basically has, you know, the the overall, for example, the leader of the brigade here, then what brigade they belong to. And then really the only military information on the counter itself is in the bottom right, which is the strength points of the unit. Now, each counter also has a shattered side, which is the reduced side, and we can see this has been if it gets down to 10 strength points, you're going to flip Russell over here to his reduced side.

This brings us to a second chunk of the components. The game comes with a ton of strength point markers. And the way these work is say for example, Neil's unit up here suffers some casualties, and say it takes two strength point losses. So, what you do is you take one of the strength point markers here, indicate the 20 side, and you slide it underneath Neil's unit. So, now when you're checking the full the actual strength of Neil's unit, you look and you see, "Oh, but it's no longer a 22, it's down to a 20." If it suffers two more losses, you spin it around to its 18 side, and so on. So, you're tracking the loss units the losses of the unit and it goes on. If at any point in time it reaches its shattered break point, 11 in this case, you place the marker and put it in here with its flipped side over. Now, these are also important because these uh if we notice here, they have different colors. We can see that Neil here is a black box with a white number, whereas right above him, Seymour has a green box with a white number. The colors of the box represent the morale of the unit. And this is their break point. So, black is the medium veteran level unit. Green, as you would expect, is a less experienced unit. When you suffer losses in combat, you have to make a morale die roll on your 10-sided die. And for a unit that is a black veteran status here, you need to roll a seven or less to keep the unit from breaking, from routing. For a green

unit, it's five or less, so a 50% chance without other factors factored in that a green unit is going to break in combat. There is also an elite status unit which have their morale in gold. Gordon's unit here is a 23 strength and gold unit, the best unit in this scenario. This one has the gold status for breaking is a nine or less. And so, it's very tricky to break these gold units in combat. There are other markers for the units in the game. In column two can be represent the unit being in a column formation which speeds up their movement along roads. Units can build breastworks for defensive formations in combat. Fired is for marking your artillery fired during the artillery fire phase. Then routing and panics, so routing is put on a unit when it when it breaks in combat. And panic is interesting enough put on the hex the unit breaks in. And this impacts the routing rolls, the rally the routing die rolls of units that are adjacent to this unit. So, in some ways it can create a chain reaction of routing in combat. And then lastly, we have out of command. Command and control is modeled in the game and will if a unit is not no longer in command, then you drop one of these out of command markers on it. Now, I've got all of the counters from the game stored in this cube for me storage tray and there is a link to this kit down below in the video description. So, if you're interested in storing your counters this way, you can use that link to order and that will get you a discount on your order as well. Let's take a quick look at the documentation that comes with the game. As I mentioned, the rulebook is very modest and this is a series

rulebook version 1.5 is what this version, which means you can use this rule set for any game in the series. There are some game specific rules, we'll take a look at those, but for the most part the rules are applied to all games. So, once you know how to play this one, you can play all the games in the series. And very modest again, eight pages. We've got some images and graphics here to explain things. Nothing tremendously complex and the rules seem for the most part very clear as far as I've been able to interpret them so far. In addition to the core rulebook, each game in the series in Wilderness does too, comes with a playbook. This playbook highlights the the game specific rules and there are a few for Wilderness, but not very complex, really just a page or so of those. And then it highlights all of the scenarios you can play. And as we mentioned, there are 13 scenarios in the game, less than half of them use both maps, but they span again in length from 2 hours to 16 hours, 15 16 hours for the the full two-day campaign. The playbook as well ends with some design notes and some historical commentary on the battle, which is very interesting to read. The game comes with a very modest set of charts to use as well. We've got on the right here the terrain effects chart and how that impacts combat and movement. Morale chart here for your routes and rallies, the range of units for infantry, artillery, and then the very important combat results table, which is used both for fire combat and for melee combat in the game. And then some highlights on movement here. Lastly, the game comes with the turn track and a Confederate and Union loss track. This helps you just track basically what turn in the

game it is, very straightforward. And then losses are important because every strength point lost equals a victory point for your opponent. So at the end of the game you count up the losses, which can be significant, and you total up to see how certain each side did did in terms of inflicting casualties on its opponent. Let's walk through the sequence of play now to get a better sense for how this game plays. Before we do that, let's talk a little bit about what we're looking at here with this sixth scenario. So this is the afternoon of May 5th and it is called the afternoon fight for Orange Turnpike, which I believe is this road that runs east-west along the battlefield here. And specifically, this is going to be fighting over this Saunders Field. I've got three tokens here to mark the victory point locations. Union forces are on the right, Confederate forces are on the left.

And this victory point here is worth 25 points for the Union forces, but it's worth 50 points for the Confederate forces. Likewise, this one over here is vice versa. If the Union forces can get here, it's 50 points. Confederate forces hold it, it's 25 points. And actually, this artillery is on the road above it here, but I just moved it to show it. So, it's These would be dramatic victories if either side can reach the opponent's victory point locations down here. But, that means that this point here, which is worth 25 victory points to each side, is really the contested spot that both sides are fighting over. Now, this is a 5-hour scenario. Union forces and Confederate forces basically slamming into each other in and around this field and the woods surrounding them trying to gain control of this victory point here. But, let's walk through now the sequence of play to talk a little bit about how this works. So, the The game is played in player turns.

The first player goes first, second player goes second. Whichever player has the initiative in this scenario goes first. In this one, the Union forces would go first. So, each and each player follows an identical sequence of play for their part for their half of the turn. The first thing you do is a command phase. The command phase means you check all the units to see which units are in command and which units might be out of command. To highlight how this works, let's take a look at Upton's Brigade here, which is part of the first division and the sixth core. For a unit to be in command, they have to be within four hexes of either their division commander, which is right and we can see he's got one star here with the same brown band, or your core commander. Upton's sixth core, Sedgwick is the sixth core commander, who has two stars, or your army command. And Grant and Meade are both the commanders here.

Grant has four stars to indicate that he is one of the army commanders that are here. So, Upton would be in command if he's within four hexes of any of these. Now, that [snorts] is by the generic rules. However, there are scenarios there are game-specific rules for Wilderness because this was such a chaotic battle with troops getting lost and confused in the woods and the thick woods and smoke rolling through the woods that for this particular game, you're in you're considered in command and control as long as you're within three hexes of any commander from your side. So, that makes it a little bit easier to keep forces in control in these battles in this game. Now, in this specific scenario, if we looked at all of these forces here, everything starts the game in command and control. You do have some some options as to where you place your leaders. So, I've placed the leaders for both sides so that all units are in control at the beginning. The next phase of the the player's turn is what's called the organization phase and that is where you can build breastworks.

During the organizational phase, you can command units to build breastworks. You drop one of these breastwork markers on them. Now, they really can't do anything else during your player turn, but at the end of your rally in your rally phase, this breastwork marker is considered complete and this gives defensive bonuses to the unit when it is being attacked in this hex. After the organizational phase comes the offensive artillery phase where your the phasing player's artillery can fire. Now, there isn't too much artillery in this scenario. We've got a I guess five. That's quite a bit Confederate artillery units over here that are all limbered up started ready to move and then two over here. However, despite the fact that you do have some artillery, it's very hard to use them in this scenario because woods block line of sight and you got some altitude and some hills here that can block line of sight, too. Which means that and you can't set up artillery, you can't unlimber them in these woods hexes unless it's adjacent to an open hex. And if you do that, it fires at half strength. So, really, if we're fighting over this Saunders field here, the best we can hope is that we could get some Union artillery here, maybe some Confederate artillery here, but given how congested this is with infantry units, that's really hard to do. So, again, artillery in these battles, in the Wilderness battles, played a minor role, and it plays a very minor role in this scenario. It's tough to use and tough to use well. Now, after you go through that artillery phase, where your artillery can fire, you go to the movement phase, and let's talk a little bit about that. In the movement phase, you can basically move any of your units

that you want to. Leaders can move have a movement factor of nine, so Robinson could move nine, and infantry units have factor of six. This open terrain here has a movement cost of one. Woods have a movement cost of two. Now, by this, what's really interesting about this battle here is that, by the series rules, units exert a zone of control in the hexes that are around them. And when you move into an enemy unit's zone of control, you have to stop. There's some other restrictions and elements with movement, too. In Wilderness, however, because the woods are so dense, units do not exert a zone of control into an adjacent hex if there's woods in it, which means that, theoretically, you can slide units past units or through units through these woods. Now, it does cost an additional movement point to move into a hex that's adjacent to a woods hex that's adjacent to an enemy. So, Daniel here could move from here to here at a cost of two for the woods and one because it's adjacent to Robinson for three. But, it creates some very interesting control and movement issues in this scenario to try to recapture the nature of the fact that a lot of this fighting in this battle was done at close quarters in very thick woods, and it was really hard for units to exert influence in the areas around them.

After the phasing player moves, the next stage is the combat phase, and that consists of three parts. The first is defensive fire. So, any units that are adjacent to offensive phasing players, say if the Union player moved Russell up here, these defensive units here could fire. And I'm I'll I'll show this more. I'm going to create a gameplay video that's going to show more details. But basically, you can combine units in any way that you want to. So, Stafford and Stewart could combine to give a strength point factor of 23 by combining their 17 and their their 16 and 7. And then you would fight with you would fire with that many factors on the combat results table. The results are going to indicate some strength point losses to Russell. Perhaps Russell would have to retreat. And whenever you suffer any kind of casualties, you also have to do a morale check. But if Russell were to survive that and not retreat or not break, then the next part of the offensive phase is that Russell can return fire on the defensive units. Now, for example, Russell could fire at Stewart or Stafford. If there are other units up here, he could combine in different ways, too.

The same process would apply. If Stafford or Stewart's units break or route, they would be removed. You'd apply some losses to them. And that can can completes the first two parts of the combat phase. Then the next third final part of it is the melee phase where as the phasing player, you can dictate one hex to attack one hex. By the way, I should mention, stacking is one unit per hex. That's very important. You can only stack one unit per hex, but any number of leaders can be in the same hex, too. So, for example, Russell could say, "Okay, we're going to do melee against Stewart." And then you basically repeat that combat phase. There are some defensive bonuses to firing first in close combat in melee. And then if Russell doesn't break on their charge, then Russell get a would get a chance to attack against Stewart. And you'd apply losses that way. So, that really is in essence, you're using the same combat results table. It's a three-step process. You get defensive fire, offensive fire, and then a melee exchange to hap happen after that.

Once that's finished, you have completed basically the combat phase in the turn and then the last part of the turn is that the phasing player can try to rally any units that have broken and been routed in previous rounds. Once that rally phase is done, the first player's phase is over and it's the second player's turn to do their actions in the same way. Now, there are more details with combat in terms of column movement, in terms of how terrain applies to combat, how leaders can influence combat, how units route and rally and retreat. So, there are more details to this game than what we've looked at right now, but that's the rough game flow of this series and how this game works. If you'd like to learn more about how the game works, I'm going to create a gameplay video. I'll put a link to that video right here that you can check out.

Progress saved