Skip to main content
Loading video...

3D Print Upgrades! - Ready Set Bet, There & Back Again, Hot Streak and more...

Transcript 12:26

Hey everybody, I'm Joey Evans and welcome to another edition of 3D printed upgrades. So, I have printed quite a few things and I've got I think five or six things in this video. Uh, first off, there have been some good questions you guys have emailed me and keep those emails and comments coming. I read every single comment on these videos and every email that comes in. So, email me at joeyed dicetowwer.com or you can comment below. I like the conversation that goes on with a lot of these and a lot of really good ideas you guys have had, too. Uh, first off, um, I am going to try to start putting timestamps in here because I know a lot of times you guys see something in the thumbnail you want to jump to. So, I'm going to put the timestamps down there. People ask what kind of filament I use. I use PLA for pretty much everything. I mean, if you have if I have to use ABS or PET G for some for some reason, I will. But PLA and brandwise, I get whatever's cheapest. Um, I've been using I use Bamboo a lot, the replacements. But honestly, I got on slickdalss.com and I put an alert for PLA, cheap PLA, and I just buy whatever's inexpensive. I don't care about the colors. Usually, if I do inserts and things, I just buy inexpensive PLA and generally it still works great. I've had a couple spools that have gone bad and have been spooled wrong or kind of get tangled, but honestly those have been the more expensive or the lesser expensive ones.

They both have had just kind of error rates on them. But anyway, they've worked out really well. So again, email me any ideas or comments down below. I'd love to see those. All right, first off, let's get started on some of the things I printed. Okay, so one thing I am going to mention here is I still use a P1S. Uh people message me about the P2S and also the Snapmaker U1 for you that haven't heard of this. It's a the printer that actually weighs less filament if you switch colors. It has four different heads on it. I have not gotten one of those. I'm looking at those for the future. So if anybody has use those, let me know. The technology is there. If they're good, I might end up getting one, but I want to hear from someone who's actually owned one and bought them with their own cash money to see if it's actually worth it. All right. So non-gaming things. You guys like to hear about that stuff I printed. I print a lot of ducks for some odd reason. My daughter loves ducks. I don't print these in multiolor. You can, but I print these in gray and my wife is going to paint them. I say going to paint them because notice they are not painted yet.

I will not bring that up to her. I'm just going to keep printing ducks and eventually these will be painted. Maybe hopefully. And then also my wife has a nice little fancy coffee machine, a little espresso maker thing and she makes me things that I don't know what they are. I know what I like. So, I printed this sign to put on top of it that tells me exactly what type of crap that it prints so I can understand it a bit better for people like me that don't speak coffee ease. So, anyway, now let's get into some board game prints. Okay, so we have a lot of inserts on here. And you know what? It made me feel good. It warmed my heart when you guys talk about how much you love inserts cuz I too love inserts for various reasons. Mainly organization and also because I like to print stuff. So, printing inserts is easy. Now, this one I did not expect to have to print an insert for, but it works out really well. And that is Hot Streak. Hot streak again has a nice little window in the front where you can put all your little mascot racers, but this is really nice. It goes in the top and it keeps all the money organized, all the cards organized. This is a very, very simple print, but it works out really well. Since printing this, I have played this a couple times and it really makes everything come out quicker and cleaner because all those bid cards, the yes, the no, everything is just organized there at the top. This is a very simple print. So, if you do have hot streak, this is a no-brainer to print. This is one that I would strongly recommend if you have hot streak because it keeps everything well organized. And again, bags are nice, but once you start

printing the bags and you have to open the bags, all this this is pretty much just set it out and go to town. Oh, don't forget the whole with the little mat, which I love that. Anyway, this is a insert for hot streak. The link is down below, but I love it. Okay, next is a simple print for Ready Set Bet the high roller edition. This it I think everything the foam insert is great. The way it it goes around is wonderful. The only thing that bothered me is the chips. The chips. you pull those out, it's kind of awkward. You can pull them out and they will kind of slide everywhere. This are little these are little chip trays. So, these chip trays will slide right into the foam. And what's nice is everything is organized by you have your different players, the different starting chips they get, your black chips, your white chips, and all the denominations have their own chip trays because normally I use one person as the banker. So, all those could come out and go directly to that person.

makes it a lot awkward bringing the chips out this way because they all come out in chunks. You place them down and it goes in front of them. Again, inserts are more for me to make the game easier to hit the table. And this really does that. The one thing I will say is that these it is a little bit longer. So, I had to kind of cut the foam off of the side, but it's barely noticeable, just a couple inches, and they do slide in in there very tight. They feel good. And again, it's less awkward to bring those chips out and also makes it feel more premium. So, this is a huge upgrade. Again, if you have this high roller edition of Ready, set, bet, this is a no-brainer to put in there. So, I like this a lot. Very simple print. I think this all prints in one bed, too, which is crazy. So, um anyway, check this out for Ready, Set, Bet. Okay, so another insert for the Hobbit there and back again. This one I I like again because it just keeps everything nice and where it should be. It's a simple insert that actually uses the present insert that is in the box already, but this makes it to where they come out as trace and every token has their own area. This again you has like a a ease of use. It really adds to that quality of life upgrade for this. And again, it gives you no lid lift. So that feels really good. and everything in there feels really nice.

So, this is again simple print, something that I added to it because this this honestly is a rolling right that I don't think is getting to love it should. I think it's a great great game. So, again, take a look at this as an insert again for The Hobbit there and back again. Okay, this next one here, this is one that I actually saw an ad for on Facebook and I thought there's no way this could work out this well. And honestly, it did. This is first off, I printed this with just filament that I had left over because I wasn't sure how much I'd like it. Number one. Number two, I wasn't sure how much I'd ever play Hangman. And number three, I wasn't sure if this would actually work the same way it looked on the video. And I wish I used better filming because this this is great. This is a Hangman game that fits all into this box. This is fantastic. Again, the storage of this is brilliant. As you open this, every part of this is just brilliant. The way everything puts together, the way everything's stored, it doesn't roll around. Everything has its place. And when you set this up, I did not anticipate this being this much fun for the family. It's just as much fun to be the guesser as the guess, I guess. I don't know what that what the name it is. Anyway, so it's really, really enjoyable. And that's what's great about this is putting together that little cowboy hangman as you start putting the hat up there, head, body, legs, all that. It really gives you that sense of dread as you're guessing. Side note,

forgot how hard hangman is because you only have I mean because before when I do on paper, I'll like add eyes then a smile, add a nose, give them some opportunities. This one's pretty brutal. So, pretty much what you can do is kind of take a piece out instead of putting it directly on there. Take a piece out. This is Tom's idea actually. Take a piece out and then set it there below it and then the next move it gets put on the body. So, that way you give them twice as many guesses because let's be honest, it's pretty difficult to guess a word in hangman. But everything about this fits together really well. And it's just so clever. I mean, even from where you choose the different letters and and everybody has their Okay, I've chosen this. You just flip it up. And to get those to come back down, it is a simple pull, lean forward, and those all flop out. It's fantastic. And I knew you had to get magnets for this. The magnets are readily available on Amazon, and they're pretty easy to put in. Everything about this has been designed so well to go together. There's been a lot of thought put into this. So, this makes me want to really look at what this guy has available as well elsewhere. This is one of the ones that you do have to pay for, but I think it is worth it because again, it's so small. It fits into this.

This is it. And he has a lot of different games that kind of have this type of footprint. So, those look really good. And this is worth it. It's a great family travel game. He also has Settlers of Katan Storage that looks like this type of box. So, I might look at that next. and he had several other games on there. That's interesting. So, check that out if you guys want a travel game. This is something unique that I probably would not have printed, but I'm glad I did. This honestly is now on our on our bookshelf and we've played it a lot because kids don't play hangman and I can think of some really good words that there's no way they're going to figure out, but they usually do. Finally, I had to print a dice tower. This dice tower is really cool, but there's really no reason for this to exist besides being cool. It's a dice dice tower that has five catapults, five or six catapults that throw the dice into the window so they can roll down. That's what it does.

I mean, yes, every time you smash this down, they go down. It's pretty cool. Then you have to reload one by one every dice. It takes a bit longer than just dropping them down there. I understand that, but it's pretty cool. Now, let me tell you a couple things about the print on this. It doesn't depending on your printer. Mine might not be dialed in well enough. First time I printed it, it would get stuck. It wouldn't go in there. I had to shave it down to get the top part to kind of slide in. Then, it kind of made so much like dust, I was like, I don't know if that that'll kill me or not. So, I decided not to go ahead and sand it down. I was printed it about 99% a little smaller. Then, it fit in there pretty well. You use little rubber bands to attach the catapults. So, as you push it down, the catapults throw the dice in there and then comes right back down when it comes up. Really good. Again, this is it's a really cool conversation piece. Whether or not it's you don't use it a lot, maybe not because I do have it out there when we play zombie side for those weapons like the chainsaw where you have all the different dice out there. When you do use that chainsaw, just smashing that thing down and they all come out. Things like that make it pretty cool. It's pretty situational, but again, it's pretty fun. And let's be honest, I like to print functional things, but I like to print fun things, too. So, anyway, this is a catapult dice tower. That's really cool. If you don't think it's cool, then you don't have a pulse because everyone should think this is cool. It's a catapult dice tower.

Come on. It's awesome. Okay, so that is it for this edition. So, again, email me joeytowwer.com or comment below any questions or whatever. love to hear from it and love to hear if you guys want to keep this series going because I have printed a lot more stuff that I have not put on this one and it has been a couple months since I've done one of these. I'll try to do them more regularly, but we've had conventions and things, been traveling now home for a while and I can start warming up that 3D printer. So anyway, let me know what you guys are printing. Let me know your thoughts. I'm Joy Evans. I'll see you later on the channel.

Hey folks, thanks for joining us for that video. If you haven't yet, like the video, subscribe to the channel, and hey, make sure you check out what's happening where I'll cover an app on an iOS or a Switch device, and you can check it out along with me. Thanks very much. You've been watching the Dice Tower.

Progress saved