How to Paint Miniatures with NO Experience and CHEAP Materials
Transcript
in this video I'm going to walk you through my very first experience painting board game Miniatures and I'll show you how I started with no experience the cheapest paints and the cheapest brushes this is what my pieces ended up looking like but of course I didn't know that when I started and I was nervous about messing everything up perhaps you're like me you've been wanting to paint your Miniatures but you're terrified of messing up and ruining the pieces and you don't want to spend much money on supplies for a hobby you don't even know you'll like hopefully this video will encourage you to get started as you watch me step by step through my first experience to give credit where credit is due I watched two valuable instructional videos this one was longer and all-encompassing great if you want to get into the hobby of building and painting miniatures this one was shorter and probably better for first timers but neither is required if you're watching this video as I'll show you the most important takeaways all of the pieces in this video come from a board game called an age contrived which I will review in a separate video suffice it to say that the game is loaded with stunning components and it seemed worth it that the Miniatures should be painted to match the aesthetic of this gorgeous game in the beginning my board game Miniatures looked like this they were made out of gray plastic with a colored base and they were also extremely small which in my research I had been warned that very very small Miniatures would be
a very hard place to start as it requires a lot of detail now I knew I needed to begin by priming and what I wanted to do was a zenithal prime which requires a black base with a white primer sprayed from above to create a highlight my hobby store which was extremely limited where I live uh I wasn't clear on what the different primers were and there weren't very many available to me I ended up buying something that I thought was white and it was actually transparent so the idea of doing the zenithal prime was immediately out the window furthermore I didn't realize this when I had begun but to do it properly you need to begin with a black primer and then have another can of white primer to spray on top so I didn't realize this when I had watched the video I only learned this after the fact and had I known it I probably would not have tried the zfl prime because I didn't want to spend extra on multiple cans of primer I did two layers of primer I sprayed the Miniatures from all directions and as I sprayed I did quick Puffs so that I didn't put on the primer too thick when I prepared to do the painting I started by making my palette now through watching these videos I had learned about a wet palette and i' never knew about this before but the advantages of using a wet pallet is
because the surface that the paint is on is a little damp it actually keeps the paint damp too so whereas a dry palette the paint might dry even while you're using it with a wet palette the paint stays wet longer and that way if you're spending a lot of time using the paint and going through the details your paint won't dry up while you are uh using it on your palette so of course I didn't want to spend money on a wet palette I wanted to make my own and the videos I'd watched described how to do this I took some paper towels I laid it out on a plate I dampened the paper towels and then I put a parchment uh paper over the top now I was instructed to not use the wax paper because wax paper is going to have a layer of wax that will prevent the moisture from the paper towels to seep through but by using parchment paper that just became just slightly slightly wet the entire time so this was my wet palette I'm now going to begin with the base layer now ideally what I wanted to do was the second method in the video from squid Mar Miniatures this method required contrast paint being painted on top of a zenithal prime in my case I didn't have the primer and I couldn't even find the contrast paint but again this is all about doing things as cheap as possible possible so here's
what I did instead the basic idea is to paint a base layer on top of a primer that has the highlights already baked in and then from there paint more highlights on top of that or in other words start dark and get lighter and lighter as you go so what I'm going to do is Begin by painting the model with a black wash uh before I start I'm going to put it on my palette and water it down a little bit one of the things that I found everywhere is advice against using paints that are too thick if you're using paints that are too thick then it's going to obscure the details in your models and if you're using very small Miniatures this is even more important so I'm going to be adding water to this already kind of very loose wash and when I paint it on the model because I'm using a wash as opposed to just the acrylic paint uh what it's going to do is it's going to settle into the deep spots on the miniature and it's going to be a little lighter on the raised parts and so that's going to kind of create a bit of a more shadowy effect as opposed to just painting it with black paint so while you'll find out that a lot of the other paints that I'm using came from my children's art sets uh this is something that I did go out and buy because I wasn't sure if I could accomplish the effect of a wash just by adding water to acrylic maybe you can but I decided to spend the $3 that it
took to find this uh pretty cheap wash from The Hobby Shop speaking of my kids art set why don't I show you the supplies that I did buy now I bought everything at a hobby store in an overseas American base in Japan so because it's overseas the store was very small and the supply was very limited I didn't even have choice of Brands I simply bought what was AA ailable and it was very cheap I already showed you the primer and the wash the brushes are very simple synthetic brushes they were about $2 $3 each and then each of the acrylic paints the only reason I bought these was because I didn't have these colors and I didn't have metallic colors but for everything else I was able to use my kids art set now all of this is acrylic and all of it is pretty low quality I think altogether I spit less than $40 now for the base layer the whole idea is to paint the entire surface or general region one solid color so for the crow I started with the red of the cape beginning with a dark color so I could work in the highlights with a lighter color later on I'm going to show you how I used my palette to mix paints you might be wondering why even use a palette but as you'll see here it's very helpful for bringing in different colors until you get something just right special note if you are using expensive brushes then don't use your expensive
brushes for mixing the paint like you see me doing here I'm using my cheap brushes and you should too now as you're watching I want to put special empasis on something that you absolutely must know the most important thing you can do when painting miniatures is water down your acrylic paints this is crucial to be able to paint effectively with without obscuring the finer details in your miniature when you're painting you're going to be able to see through the paint a little bit and that's okay if that happens it's better to paint multiple thin layers than one thick layer if at the end of this there was one thing that I was most displeased with it's that sometimes my paint was too thick it was always easier to paint when I thinned the paint down with water now I think different people are going to have different ways of helping you determine whether or not you've thinned your paint enough for me I added as much water as I could while still being able to control the paint if at any time the paint started to drip or spread out like water does then I would add a little bit more paint to it and if the paint was coming off the brush too thick I either removed paint from the brush or I added water back in So alt together for the crow I did Red for the cape and for the Hat I did a flush color for the pages of the books that it carries a brown for
the staff it carries yellow for the ropes around its neck and wrapped around the staff and then multiple colors for the book bindings I've got to say that without a white primer sprayed from above I don't think simulating the zenithal prime was very effective with this type of material I suppose if I had invested a little more or had found the contrast paints maybe I could have accomplished the look that was achieved by the more professional YouTuber in his video with the wash however I did not paint the Crow's feathers I felt like I was able to accomplish the look that I wanted using just the wash there was another convenient side effect of starting with the wash and that is when I did the darker base colors a little bit of the wash came through like the base color was a bit transparent just enough that the paint didn't look even and I liked that it gave the Shadows more of a realistic texture to them so instead of doing two layers of the base color for the Crow's Cape I ended up doing just one now I didn't do that with all of the models with some of the lighter ones I did do two layers of the base color but I found that the one layer with the Crow's Cape was perfect so moving into the highlights this was really interesting because uh with the colors that I had I started highlights
just using the color right out of the tube so I just used plain red and as it went onto the model it seemed too bright for me and the thing that really surprised me was that whenever it dried it dried looking darker than I expected when it was wet so uh that was interesting and I think I would recommend that if you were using colors that you try a little bit and let it dry to see what it looks like otherwise if you're like me you keep adding something to darken the paint and then you find out that it's too dark and you should have just kept it bright anyway for the first uh layer of highlights I used the color as it came right out of the tube and then for the second layer of highlights I would add a little bit of the lighter uh flesh color to my bright red to make it even a little bit lighter and I did that for some of the edges at the very top of the cape I'm really really happy with how that turned out but as for the ropes the ropes were so finely detailed that uh highlight Hardly did anything because it was too difficult to distinguish between a shadowy part of the rope and a brighter part of the Rope so with my finest brush I ended up just retracing the exact same lines and I let the imperfections of the brush's bristles create the texture of the Rope but I think it's a helpful hint
you don't have to have absolute control of the paint you can let the paint come off the brush in its own way and capitalize on that uh non-uniformity to make it look more realistic one of the best pieces for highlights is the dragon because the dragon has a round body so to make sure that its form came through clearly I started by painting it sort of an orangish color throughout and then I just highlighted the peaks of its curves so that it kept these orangish edges and that really gave depth to the dragon and helped distinguish the Curves in its tail as they looped over itself one of the things I wanted to try was the dry brush technique I learned that it required a special type of brush so I bought one just for this purpose but as I was using it I found it wasn't much better than just using a small brush at least not with Miniatures that are this size I think it's probably much better if you're painting large Miniatures but honestly I don't think I needed the large brush after all once I had finished painting all of my figures the last question I faced was whether or not to paint the bases the bases were already colored to begin with and I had been careful not to spill paint on them but I decided to try painting them anyway just to see what kind of difference it would make I'd also
underutilized all of the silver and the gold that I had purchased so I wanted to blend those into the base colors and see if I could get something a little bit more vibrant I don't have a good video of applying the sealer but putting the sealer on was very similar to applying the primer I sprayed the Miniatures from all angles using short Puffs you might be wondering whether or not it's worth it to use a sealer and I would say that before the sealer was applied the pieces felt a little tacky almost like I could scrape the paint right off but with the sealer it gave the pieces a more permanent plastic feel that made it feel like the paint was really on there and wasn't going to come off easily so even though it's an extra cost I would not recommend cutting corn ERS with this I do recommend using an acrylic sealer once again this is what we ended up with and to go over everything I did Prime these models I used a clear primer a zenial prime was not necessary but a wash was very useful it's okay to use basic paints and brushes but it's very important that you water down your paints as it's better to have multiple thin layers than one one thick layer you don't have to worry about having perfect control over your paint you can let the brush add that bit of texture using its imperfections and start dark and work
your way towards lighter highlights and that's how I did it I'm very interested to hear what some of you with more experience have to say and what additional tips you might give to people who are just starting out