Skip to main content
Loading video...

Playmat Holders, Game Upgrades & Real Castles - Board Game Upgrades

Transcript 19:02

Hey, I'm Alex, back again from BoardGameCo, and we are back with a board game upgrades and deluxeifications video, which is a series that used to be a monthly series on the channel before I stopped doing it every single month and started doing it whenever I had a bunch of things to show you. And I bet you'll never guess, but I have a bunch of things to show you. That's primarily because my my printer uh my 3D printer, not regular printer, regular printer is just kind of sitting over there. It prints paper, not nearly as interesting for this video. My 3D printer, a long time ago, when I got cats, uh they kind of went into a closet for like a year, and I only just recently took it out and started printing inserts again. And so I have a bunch of 3D printed insert stuff to show you, which we'll get to shortly. Also, if I remember, I'll throw a link down below. I either will throw a regular link or a referral link to my Bamboo printer, so you can check that out if you're interested. In fact, I'll have links to both the printer as well as a Drac Creative, who has the other things I'll be showcasing over here, and then of course, a link to Allplay, because Allplay is a channel sponsor. If you go to allplay.com, if you want board game upgrades, I highly recommend their playmats and their board game bags, both of which I use on a regular basis. I probably use the playmats more often, but I think I appreciate the board game bags more often, so do what you want with that information, but you can go to allplay.com and check that out. But with that, let's start off You know what?

Let's start off with Blood Rage, because this one actually has a small problem to it, not that it's uh Drac Creative's fault in any way. I'll show you. Basically, I'll throw a link down below to a Drac Creative uh Etsy shop. But Blood Rage over here, this is a Blood Rage, a well-worn box. It really is well-worn if you look at these corners over here. Uh this box has seen a lot of love and uh uh you know, wear over the years. But we do have uh my my printer, my folded space insert printer over here, a bunch of painted miniatures, cuz I started this, but I never finished the job. Half of my uh factions in Blood Rage are unpainted. I probably should finish the job at some point, but also, I need to figure out where all my time goes, and painting is not currently one of those things. But we do have the gods. The gods over here, here's going to be your gods, and what we have for Drac Creative is we got these banners. These little not banners, these pedestals. So, you can put If you're playing with the gods modules in Blood Rage, you can put these gods on the pedestals. If you have the gold gods, it looks even better.

I'll go ahead and show you briefly kind of what it would look like. I'm not going to fully unfold the map, but there you go. You have your god on the board over here, and then you even have You even have a fun little fun little card display to go ahead and showcase the gods in the game. Basically, when you're playing with the gods of Asgard, you always play with two gods. It's going to have abilities, and the gods are going to be jumping around the map as you resolve various factions various areas. And these are going to be the pedestals to make them more prominent. Again, the gold gods helps, but a pedestal gold god is even better. And then a nice little display for the cards so everyone can see. Although, of course, depends on your table set up and how you orient that. That's the first thing over here. What's the problem with it, Alex? You say. Well, the problem with it is this insert. This folded space insert does not really have room for those pedestals, which is a small problem. But, I do hopefully have Blood Rage Asgard Blood Rage Valhalla. That's the one I think, Valhalla. The new one. I have that one coming soon. And that might mean there's space in that box to go ahead and throw these. So, hopefully they will end up somewhere. In the meantime, they're kind of on the shelf next to Blood Rage, which is not my ideal long-term solution. Honestly, I should do a full video of board game first board gamer first world problems because one of them is like when you have to choose between an insert and sleeve cards. When you deluxe-ify your game and it no longer fits in your custom inserts. There's a bunch of a fun little first world problems you can throw together, and that's definitely one of them. From there, let's go ahead and show you our Ghostbusters insert. I still have not put up my review or gameplay for this. I really should.

Again, the problem is I started designing a solo mode and got halfway through. I finished the solo mode, but I didn't finish the scenarios. So, I'm halfway through, and I've been meaning to finish it before I actually put up those videos because I talk about it in those videos, and I haven't done so yet. So, I either need to bite the bullet and just put it live and just put a little tag in my word doc, "Hey, I haven't finished this yet. Sorry about that." Or, I need to go ahead and finish it. I will do one of those things. I just don't know which one first. But, Ghostbusters, I went ahead and printed a small little insert with this. This one is kind of a basic insert. Basically, when I'm trying to think what I want to do as far as printing things with my Bamboo, I have the P1S, by the way, in case it matters. I do love it. This is a not really a 3D printer kind of conversation, but I do love the 3D printer with the caveat that occasionally it does have a break or issue, and depending on how much time I have that day or week, that either means I have it back up and running within, you know, a day or two, or sometimes 3 months can go by before I take the time to fix whatever the small issue was.

Now, I've gotten better over time at fixing those issues, and they haven't happened that often. I probably have this printer about 2 years now, something like that, and I probably have like three issues, maybe four issues. But, again, sometimes it's an easy fix, and other times it's like, I'll get to it later, and later is 4 months later. So, that can happen just in general. But, it is the best printer I've had in overall simplicity and ease of use, but not a perfect system that inherently has no work. 3D printers are work, in my opinion. Although, I will say I have friends who have three uh who have the Bamboo who have not had any issues. So, maybe it's just me. I don't know. Anyways, I go look around my shelves, and I try to figure out which game do I think is going to stick around for a bit, either because it already has or I'm just that confident, and which game doesn't have an insert yet that can benefit from an insert. And so, that's how all of these got Well, not this one. All of these, although I do want to look up for an insert for this one. That's how these all got their insert. You go online, because I have a Bamboo, I start with MakerWorld, which is the site that hosts a bunch of files. I look around there. Then, I do a general search for like STLs for various inserts, and then I find the one that most uh suits my particular goals. In this case, we have Ghost Galore. This is a fairly simple insert. It's just a small little piece over here. Printed like maybe an hour, uh because over here, these aren't even in an insert. This just kind of keeps your tiles. These are all the tiles, by the way. All the tiles fit into the sideboard, which is amazing.

And the rest over here, you have these, you have like the various tokens, you have the tiles that lay on top. Honestly, this insert, if nothing else, kind of uh showed me how little space you actually need uh for Ghost Galore. It's a very simple, straightforward insert. Again, these kind of rest beautifully on that lip, the way it's structured. And then these tiles are on the edge. And personally, the way I play this game is when I'm playing it, I take all the tiles and I dump them into the lid of the box where people can root around and grab the various tiles they need as they are playing the game. Very simple, very straightforward, pretty basic. I'll try to include links to the various STL files I used for each of these. Again, I'll have links to Adrena, links to um All Play, uh links to my Bamboo, and links to the various STL files that I used in each of these uh things if I find them. I'm pretty sure I have them all. From there, let's go ahead and take a look at uh let's do let's do Jewels of Aedoran.

We'll do another insert, then we'll do Adrena over here. Uh and then we will do uh my favorite insert, which is Revive. Jewels of Aedoran, a game I by the way I did I have realized that I have both re- not Revive, Recall. I have both Recall and Jewels of Aedoran that are both five out of five games for me this year that I've said in multiple videos. And I still haven't put up the actual reviews for them, so I continue to talk about how much I love them without giving you an actual review, uh which is fine for those of you who just want to know what I think about it, but also those who will see a dedicated review or those who want to know why I think it's five out of five. Those videos will come at some point, hopefully before the end of the year. But over here, I printed this specifically. Usually I So again, fun fact as far as how I operate, when you're buying various um spools of uh filament for your printer, you can buy a lot of different ways. One of the ways you often can do is you can usually buy like a 10-pack on sale from either King Ruin, Sun Lu, any of the various brands that are well reputable, and you can find a 10-pack of a basic color and then just get a slight discount by doing that. So you get a little cheaper.

Because of that, I often print my basic inserts in black as you may have seen with Ghost Skalor. Although in hindsight, I kind of wish I had done orange. I have orange. I think it would have gone nicely. It was so little that I may even I know people have Ghost Skalor. I may go ahead and give them a free insert and reprint it in orange. I think that'd be nice for the Halloween vibes. But anyways, aside from the fact that I usually print them in black, I like it when I can get a nice color match to this. And I really enjoyed this color palette for Jewels of Aedoran. It's not the exact shade of the box, but I actually like it. Provides a nice little like, you know, kind of offset to the color palette there, which I really enjoy. Anyways, that said, we're going to go ahead and pull these out and show you how this insert works because we have these tiles. Well, actually, let me go ahead and pull this out here, pull these out here. Basically, you have your individual component trays holding a variety of components. This particular person also had 3D components you could print that I just didn't think were cool enough. I'm not always a fan of 3D printed components. I love the inserts.

Components are case-by-case. So, these boxes are pretty full, uh pretty empty. There's space for them because you can go ahead and use other elements. He designed them so they can accommodate the 3D printed components he designed as well. And again, it also fills up the box, which is not a bad thing. So, we have these. I will say this particular box lid, it kind of is not the it takes around a bit. So, it's not the tightest as far as the fit on them, but it's not a huge deal. I think I think I did it correctly. I think they're all the same lids, just that they don't fit perfectly on the top, but it's fine. It's fine. It just could be better. Aside from that, we have these over here. So, we have our various tokens, the various totems or whatever you call them, the Stonehenge type things, our pieces over there. Then we have this piece over here, which this kind of operates as a lip. You'll see in a second. So, this one kind of fits in a weird way to make everything, you know, standard. And then we have the component trays, the individual player trays for over there. But again, you see over here, this is a weird setup this piece because you're kind of storing both this over here and these. So, this has both a small lip and an edge piece, which makes it a very weird component. But if your goal is keeping everything nicely in the box, it does function exactly like you would hope. So, it does a great job.

It's just weird. You kind of want to pull this out and it's not really designed to be pulled out in the same way. You could pull it out if you want, but, you know, I wouldn't. Then you have over here the player trays. Player trays hold all the individual player pieces like so, and then it uses this as a cover, which I think is a great idea. So, overall, that's going to be, you know, the the the various player trays. These go in nicely over here. You put them back on top. Just put them there. Then we go ahead and we put back in the side piece over here. And then you have the individual trays. We go one, two, and three like so. These are going to show up there in that corner. And then these nicely go into the corner and these come in at a cross piece like that. All of it comes together very nicely. That's the Dudes of Dor insert. One of the problems, by the way, with printing inserts and something that does bother me. Like people like will talk about like component waste or just general plastic waste as far as the environment and plastic components in board games. And I'm not dismissing that, but I'm usually not bothered by that. What does bother me is thinking of all the inserts you have to throw out in the garbage when an expansion comes along and you have to reprint a 3D insert. Because that could happen. If Dudes of Dor comes with an expansion and then someone redesigns an insert to accommodate the expansion, this is now useless. And then it unfortunately goes in the trash, which feels like such a waste. And that that concept of printing an insert and throwing it out, I don't I don't love it. Anyway, Powers of Arkham, just just things to bother you uh before we continue with the video. Powers of Arkham, this actually has two things. So first of all, a fun fact, a long time ago I did a series on a regular basis, Top Shelf Gamer sponsored the upgrades of Lux Aeterna series. And while

technically they never actually stopped sponsoring it, I just don't do it monthly anymore. So I still shout them out when I have an opportunity to do so. I may have a link to them down below. Again, I don't know if it'll be a referral link or not. It might be, it might not. But we do have these priority coins from Top Shelf Gamer that I do love and use in Powers of Arkham. So if you're looking for a nice feel that really increase the component quality of the coins, highly recommend these. These add a ton to the general like look and feel of the game. There's nothing quite as satisfying as hand- handling a good set of metal coins that nicely matches with the theme of the game you're playing. So highly recommend those. Then from from from Jenna Creative, we have a bunch of fun things. Let's go ahead and show you some of them because I don't want to take everything out, but I'll I'll take out some stuff. I'll take out some stuff. So let's go ahead and pull these out, pull these out. I have to replace some of these components. I just want to uh show you them first before I do so.

Then let's pull out our pirate ship and our card pack can go over there. Uh basically, they have a bunch of components for both the uh base game as well as the expansion. And I'll show you the components that we're placing, too. So, first of all, we have our cannons over here. These are both going to be upgrades for your individual ship as well as upgrades for the cannons components. I'll try to zoom in a bit. They're upgrades for your cannon components as well and if you have the uh Commander's expansion. So, we have two different types of cannons over here. You're basic ones and then you're full ones over here. Uh which is not necessarily the easiest to tell apart, but they do the job. And these go into your ship. So, now instead of having a basic gray cube in your ship, you have cannons. So, you're slowly slotting your ship with cannon upgrades, which is so much more fun and thematic. I love that. And then you have these, which again, they uh from the top view, you're not going to see a difference, but from the side view, they are twice the height overall. So, again, they are nicely twice the height. I don't know how well you can see over there. So, that is at least good. But again, that's going to be your first upgrade. So, you have both cannons for the Commander's expansion as well as the base tokens to replace these gray cubes for your base game. That is easily my favorite com- That's actually not true. There's two There's two of my favorite components. The other ones cuz the other one is also uh is more I'm more mixed on and I'll explain why. The other one I really enjoyed is I enjoyed the this over here. These are your fort pieces and they are going to have your fort tokens placed into them. So, when you have a fort, which again is from the Commander's expansion, you can place it into your little fort over here and then you now have a uh new way to show those fort tiles, which adds a nice degree of 3D board presence and they are just really nice components. You do have to shake them out a little bit, which is not always the best, but they come out

usually relatively easy enough. So, these forts over here, another solid upgrade component. Highly recommend these. Both the cannons and the forts, absolutely top-notch. Uh the components that I'm a bit more mixed on, I still use them, but it's the kind that I I am open to replace them if I find better ones and I might hunt for better ones cuz I do love Pirates of Maracaibo, so uh trying to improve that the game as much as possible is definitely top of my list, which again, I need a 3D printed insert that fits everything, which I have The problem is, again, these are first world problems. I'll go find a 3D printed insert. By the way, the cannons are replacing these basic cubes and these basic cubes, which is like such a such a step up, such a huge step up. Again, the first world problems part is I might find a 3D printed insert online from a file that's really, really good, but it's not necessarily designed to fit the upgraded components. The coins I have, these little bits. So, I have to like do my research as to can I fit my unique copy of Rise of My Kaiba into someone else's uh insert that they were so kind to create an STL file. First world problems very much. Anyways, moving on, we have these. So, these are going to be our little elements. You have your round trackers for the game. These are players round trackers to track which round you are on, one, two, or three. They're nice, they're chunky. They don't have the metal heft. This is where I'm spoiled by metal coins. So, they're fine, no problems with them. I do tend to use them just cuz it's simple to use and as the visual board presence, but they're kind of take it or leave it.

Then, you have point trackers over here. Again, decent enough. And then, you have these which go on the residences. So, these track individual players putting their tokens in the residence. I do think these are, again, a nice step up from the base game components where you just have a small little circle cardboard token. It's nice to have that visual representation as people put a stack of cannonballs on the residences. So, again, these are fine. And then again, the next one is, again, in the fine category. I think I said again like five times in a row there. Uh the next one is going to be uh the upgrades for the various gems, the uh the pearls, the uh gold, and the I guess emeralds. Is that what they are? I assume they're emeralds. Basically, in the base game, you just have a bunch of little cubes over here, which are fine, but they're basic wooden cubes. And then, these component upgrades, they replace them with 3D printed versions of those, which are nice. Again, this is my problem where because I've gotten used to Top Shelf Gamer when they do have upgraded resources, because Top Shelf Gamer, they definitely have gold cubes, uh gold chunks, which I want to get. The question is do they have anything for the sapphires or for the pearls? Cuz that's going to be the question here. Cuz visually, these are great. They are a solid upgrade to the uh components you have in the base game as far as giving you something more than just a abstract cube. You have more tokenized pieces. They are nice. The main issue is that heft aspect. I do find often when playing with a 3D printed bits, the heft element isn't there in the same way as when you have fancier bits. They are very affordable uh relative to other things, so there is pros to that. But, that's just the uh thought process on those. So, overall, these are nice component quality upgrades. Some that I love and some that I enjoy, but might look to replace over time. And that's what we have for

Pirates of Maracaibo, which brings us to the next. And also, I have my newest expansion, Bermuda Triangle, which I have not played yet, that I do want to play, but I will get to that later. Which brings us lastly to Recall. Recall over here, I love this insert. It does such a good job. I mean, the Treasures of the Abyss insert was good, but I think this one is even better. Uh let me just go ahead and show you what this looks like over here. Do I want to zoom out the camera? No, I'll zoom out a drop. So, if we zoom out a bit over here, then you can see all the stuff over here. This is 3D printed. Uh you could put the box on the side cuz everything so tight. I wouldn't recommend it personally because any lid lift At least if you had a box band. If you have a box band, you're fine. If you don't have a box band, any sort of lid drift and things will start falling all over the place. Uh but, this over here gives you everything you need. And my favorite bit is uh the person who designed these this uh these inserts, they used uh they kind of modeled it so you can have a top-level color palette shift, which is nice, especially if you do have all the colors, which I do. I have purple, red, blue as far as the filament I'm printing with, which means you have these as your component trays.

Like, that's such a nice visual touch. The bulk of it is in black for that consistency, but the top just has a little element to tell you that this is a, you know, purples, this is blues. I absolutely love that. I'm a huge fan of that little change over there. That little uh adjustment. You can print it in basic all one color, too, but if you do have the filament ability, uh it's a very nice touch to be able to do that. Now, we have over here your various uh you know, the key tiles over here are going to be there. The upgrade tiles. We have our bag, so this has There's for your bag of cubes as well as cards. This does fit sleeve cards. I have not sleeved it yet, which is a crime, honestly. Sometimes, even though I love a game, I don't get to sleeving right away. And sometimes, if I don't grab the sleeves in time, months can go by, which has happened over here. We have two separate trays over here. I'm just going to pull them out together, but I want you to see that they're separate. And then we have this main tray over here, and that's kind of how everything fits. You have your main board, your player boards, your uh time tracker board, and then everything just kind of nicely goes in here on top of all of that. Those are all the elements. Very straightforward to print, beautiful, and I really Again, I said this already, but I love these player boards. I think they're so nice as far as how how much First of all, the setup and teardown is much better with these. Like playing with these versus tons of bags of components is such a quality of life upgrade, highly recommended. And then again, the visual aesthetic of it is absolutely beautiful.

So, I'll include links to all of this stuff down below. That is basically my Recall uh insert. And that's it. That is your 3D upgrades and luxury visions video. We will be back in some number of months the next time I uh I want to show you a bunch of things, which might be sooner rather than later, I don't know. Now that I'm doing 3D printing again, uh the the speed of various inserts entering the collection might be higher. And I like showing them because I think especially if you have a 3D printer, there it's nice to see like, oh, I can make my game like that. That's a great quality of life upgrade, again, until the expansion comes along. But all of those are great. Like the insert I have for um Revive is great. That one actually got this one who prints 3D inserts as opposed to printing it myself. Uh but that's another thing. If you do like these, you can often find services or people who can print them for you, even if you don't have a dedicated 3D printer of your own. And that's it. These are the various games.

We have Blood Rage, Dudes of Doram Ghost Galore, Pirates of Maracaibo, and Recall. Hope you enjoyed this upgrades and luxury visions video. Until next time, I'm Alex Radcliffe from Board Game Co. And as always, I hope you have a good one.

Progress saved