Do you paint your board games? (A review of the Reaper Learn to Paint Kit - Core Skills)
Transcript
Hi! It's Ryan from Nights Around a Table. Do you paint your board games? i don't. i didn't even know painting your board games was a thing, cuz i don't play board games that involve miniatures. And there's this whole sub-hobby out there of people who play games with a lot of little unpainted plastic figurines, that spend the time sitting down and painting them. And because i don't play those games, i wasn't really keyed into this. The first time that i kind of cottoned onto the idea that you could paint elements in board games, and not miniature war games, was when i started seeing pictures of people where they painted their Tzolk'in gears. If you remember, i did a How to Play Tzolk'in video not too long ago. Check that out if you haven't already. So the gears come unpainted, but some of these paint jobs were just absolutely eye-poppingly gorgeous, and i have to admit, seeing those painted gears - i didn't own the game when i first saw them.
Once i saw them painted, i thought maybe that's a game i want to pick up? Years later, the gears remain unpainted today. i'm being a bit disingenuous, because i guess i did know that mini painting was a thing. i first found out when i was in art college - one of the best art colleges in the country, i might add, and then i dropped out, and then i went to one of the most horrible art colleges in the country. And there, we had a project where we had to sculpt a figure and then paint it. i was super full of myself at the time, as i usually am, and i sculpted what i thought was a complete masterpiece, and i painted it. Painting is not my medium AT ALL. i'm no good with it i prefer markers... i prefer pixels, really, to paint with. i didn't do a good job on this thing.
But the kid who did - the kid who had the best-looking thing in the room... it was absolutely unbelievable, and i'd never seen anything painted so fantastically, and it turned out he was a minis painter, and that's where he got all his painting chops. So that was my introduction to it, but i probably put it out of my head because it was a big burst of my ego bubble at the time, so i thought "BLAPPP! Painting's not a thing." But then i saw the Tzolk'in gears. The things that i would like to paint, if i were able to paint, go in this order, i think, of preference: first, the little items in Tiny Epic Quest. Not my favorite game in the world, and not an expensive game, so i think that would be a nice, sort of trial run. If i learned how to paint, maybe those would be the first ones i'd tackle. And then, probably the Scythe miniatures.
We just started into the Rise of Fenris campaign, my friends and i, and that's game one of eight, so i know we're probably gonna play at least seven more, and i would love to have some painted mechs and minis to play with in that game. And then probably third on my list is those Tzolk'in gears, and maybe next down, the 7th Continent figurines. i might like to paint those. So i have a list of things that i'd like to paint, but i don't have the confidence to start painting at all, and maybe you're like me? So i went online last year, and i asked if you're like me, you know, where do you get started? And someone recommended this: the Reaper Learn to Paint Kit. And what this promises is to teach doofuses like me - maybe you - who have never painted a mini before, it's a step-by-step guide on how to go through it. i thought that sounds fantastic!
You know what? Let me get my special close-up camera set up, and then we'll open it up and take a look inside. Okay, here it is... the business end of it, anyway. i'm gonna flip it around. It's got little latches. Pop it open. So very first off, the top, is this instruction booklet, which we'll take a look at in a second, because what we really want to see are what it comes with. And look: it's got three miniatures for you to paint: this guy, this guy, and this guy. So some sort of warrior, some sort of ogre enemy, and a little skeleton. So you guys go back in the box, because i've already taken a look ahead in the instruction booklet and found out that this little guy, who doesn't have a whole lot of paint on him, is the first one that you learn how to paint in the kit. What else do you get? Well, you get a bunch of different paints, and you get two paint brushes.
But i think the value in this kit really is the book, because the book tells you everything you need to do down to, like, i mean it's really specific. It's like "Next step: put this many drops of this paint on your palette, and then this many drops of water, and here's how to do that." And it even has pictures - check this out - it has pictures of what the consistency of your paint should look like at different steps of the way. So, i mean, i haven't gone through it, but i'm about to. But this looks pretty good! i... i don't think i could hope for more. Now, before i start painting, please know that this is not what the channel is going to turn into. i'm going to keep talking about board games, of course. And if you're interested in painting miniatures, and you want to see somebody who knows what they're doing paint them, there are tons of YouTube channels out there where you can just watch people paint all day long, and the stuff they produce is absolutely incredible!
What you'll see here will likely not be absolutely incredible. i'm a novice, perhaps like you. What i hope to show is that perhaps with this kit, somebody as new to the side hobby of painting minis as me can actually get something nice accomplished with this, and can learn a couple of techniques, and can build up the confidence to go and then start painting the stuff in their $80 games. That's my hope! We'll see how it turns out. The one thing that i have read about this kit that's a drawback - i purchased this, by the way. They're not paying me to promote this or anything. The drawback that i heard is that you get all these different colours of paint, but the one that's missing is red. You don't get a red color, so if you're going to order this, perhaps consider buying a pot of red paint from them as well.
i'm gonna put this aside for now. They give you a list in the book right off the top of a bunch of other things that they want you to assemble, because the very first step is to give your minifigs a little bath. And they say all you got to do is put some warm water in a tub like i've done, and get a used toothbrush. They say used toothbrush. i guess you can use your current toothbrush... if you're gross. i mean, i guess it's even grosser if you don't HAVE a toothbrush. But they say just plunk them in here, and let them go for a little dip, and scrub them off. The reason that you do this step is because i guess during the manufacturing process, the minis get f- AAGH! i just sprayed myself in the eyeball!
Already, hazard prone! Wear proper eye protection when you're doing this. i was gonna say: they get crusted with factory filth or dust or whatever, and when you wash them off like this, it helps the paint to adhere to the figure. They also said to have paper towels at the ready. Thank goodness i do. You dry your little skeleton off. Aww. Ohh. Little skeleton. It's not adorable at all! i'm gonna put him aside. And even though i'm not gonna be painting these guys in this video, i'm going to - while i've got the water out - i'm gonna give a little dunk to the ogre and to the warrior. Really, since i've never done this before, i have no idea if i'm doing it properly or efficiently. The book just says splash them in there and give them a good little scrub down with a toothbrush.
Maybe if you do this all the time, you're watching, and me you're going "Oh my gosh! He's not doing... counterclockwise brush strokes. What a monster!" i'm sure... i'm sure that people will have lots to say about what i'm doing correctly or incorrectly. The book also mentions that sometimes you can get situations where thin parts like the swords or the arrow on this figure can kinda go "Mreh!" They kind of go frowzy. i collect some action figures, and you find over time that some things bend a little bit. So they say if that happens, you can run it under, or submerge it, in hot water, which will slightly melt the plastic a little bit, and then you pull it... you pull the sword or whatever is drooping back sort of farther than it needs to go, and then it'll sort of ease back in the place where you want it to go. And finally, this dude. (growly warrior voice) "Forsooth!
That's a good scrubbing." i don't know if that's what his voice sounds like. Yeah... you can see this one: the sword is a little bit, like "BLEUPPP!" - you know - a little bit curvy. So that might be something i wanna go in - you know, if i really care... and i really don't! Because these are just practice figurines! But i'm sure that if you spend a big pile of money on a really cool mini, then you want it to be perfect. The other thing that they put in the book about these figures, if you're really fastidious, is sometimes, you can see the mold line where different parts of the models connected, and... and sometimes that can have little burrs on it or can stick out, and you can sand that down. i'm really not that picky at this moment. He's still got some bubbles on him. Anyway, there they are.
They're all washed off. Hopefully, that's the only time i have to do that? i don't know if they're going to collect more dust in the box that prevents the paint from adhering to them? But i'm gonna put those guys back, and i'll get rid of this. Very nervous to be playing with water around all my lighting and sound equipment! Gah! And i'm going to forget about that, and step in it later! Here we go: skeleton archer. So the other things they say to have on hand in the book - the handy book - are a cup so you can dip your brushes in there. Bloop! Got it. With water, obviously. They mention mixing paint with, maybe, like some other paintbrush. We do have a lot of paintbrushes kicking around the house, because we're a crafty family. So i just grabbed, sort of, this other junky paintbrush that i can use to blend colours. They say a little piece of plastic to serve as a palette.
i stole this from one of my wife's crafty things, and she'll probably get very mad at me, so as long as you six thousand people don't tell her, (whispering) we'll be fine. And then, in order to make it more comfortable to paint the figure, they said you can get something like a pill bottle, and you can get sticky tack, which my UK friends call "Blu Tack," even when it's not blue sometimes, which is weird. (in swish) Oh Brits, you so crazy! And you can stick it on the top of the pill con... i should have checked what these pills were before i put 'em on camera. Ryan Creighton... hyper attractiveness... 100 milligrams. i really should have thought that joke through. i don't know what that means.
Am i taking pills to BECOME hyper attractive, or am i taking pills because i AM hyper attractive? And what does it mean if the pill bottle's empty? i don't know! Don't think about it! So you put the sticky tack on top of there, and then - that's probably way too much! - and then you put your figure on top of the sticky tack. You get him stuck there. And then you have a nice big grippy thing to hold on to while you paint, and that's apparently more comfortable. i wouldn't know! i've never done it! What is next? They have a step-by-step guide on how to mix paint. So the very first step is to put on the base coat. So i'm gonna do that, speed it up, and then i'll catch you at the next step. Okay!
That's what it looks like after step one, which is base coat. So that's two coats of desert sand paint. And if i were to critique my own work, being a first timer, i think i'm glopping it on a little bit too thick. Apparently, miniature painting is all about putting paint on, but still being able to see the details the nooks and crannies and crevices of your model, and if you glob it on too thick, then all you're gonna see is gloppy paint. So maybe it's a little bit too thick but, i'm a newbie! The next step according to the book is to do a wash. So you're supposed to water down a darker color of paint with some water. It says how much water? Well, four drops. What's a drop? The book says that you can use the end of your paintbrush, and dip it in water, and that drop of water is about equal to the amount of paint that you would get out of the pot.
That's... i like how that's super accurate and scientific and empirical, instead of just - you know - "Hey, newbie: guess." But they want me to apply this next coat with this super-duper fine brush. It's one of the two brushes that you get in the kit. i'm a little bit nervous to use this. The other brush didn't come with this protective casing on it, but this brush does, so let's unsheath it... alright. So far, so good. And i'm going to put into my palette... it wants 1:4 ratio. So i'm gonna put in one... shakey shakey shakey shake... one drop of... what's this stuff called?. Ooh... it's coming out a bit... i don't know if it's shaken enough? (clunk) Oh no!
Now my figure's falling down! It's all for naught! i've destroyed everything! Okay. (clunk again) Oh my gosh! One drop of - what's this stuff? - mountain stone. It's still coming out a bit... a little bit... here: i'm gonna bring that in a bit closer. It looked like i had some... strange paint effluvium come out first. Kinda like... you know, like, ketchup water? You know when you go to dress a hot dog, and it's just like "Oh, no! i got the ketchup water!" So i got a bit of ketchup water out of here. Okay. Here we go: one drop. There's one drop. Four drops of water. Now, they do say that it depends on the consistency of the paint, how many drops you're supposed to put in, but... i'll go...
one... two... three... four. Those drops look a little bit small, to be honest, compared to the drop that i got out of the thing, so i'm gonna put one more on, there and i'm going to use my crummy craft brush. If i were to... i guess next time i set up this camera, i might not set it up directly in front of my face. Because i'm having trouble seeing what i'm trying to do! Maybe i'll move it over a little bit, so that you can see, and i can see. Maybe that's a little bit better? We'll go this side. This side, because i'm left-handed. No, but now i have no place to put my hand! Waaaah! It's so complicated!
Here we go. Can you still see? i can still see. Camera's still a bit in my way. Probably can't see the water all that well, but i'll mix that in with the grey. And again, the book is great, because it gives you a little picture of kind of, like, the consistency you're looking for in the paint... and i think this is looking pretty... pretty good! So using this little mixture, i'm going to do the next coat of paint, and sort of get this into the (imitating an English muffin commercial that no one will remember in a Scottish accent) "nooks and crannies" of the model, so that they show up a little bit better. Okay! And there we go! That's that step done.
So you can see the wash sort of flowed into the recesses. But it also muddied up the base coat color. So what the book says the next step is dry brushing more of that sand paint that's the base coat color, onto the skeleton - not into the little recesses and the nooks and crannies where the darker wash paint went, but in the protruding bits, just to get that sandy color back. i WAS worried as i was applying this darker colour that i was sort of muddying up the model and it was looking a little too dingy, but i guess this is the step that corrects that. So the book's telling me to dry brush it, which involves putting a little pain as possible on the brush, and just sort of going over lightly over those protruding areas. i will also say that this is very challenging trying to paint and keep the figure in the shot the whole time, and also being able to see past my camera ,so if i'm not doing that in those speed motion shots, i apologize.
It's my first outing. i'm doing the best i can! There is the dry brush base coat. i think i'm doing okay? i still feel like i'm putting it on a little bit gloppy, a little bit thick. And you professional model painters, or even experienced hobbyist model painters, might be aghast at my workmanship here. But i can kinda see what's going on. It's not as cool as the picture in the book, but it was neat painting the skull of the little skeleton warrior, because there's this recess in the side of its skull there that stayed kind of dark, even though i painted the base coat, which looked pretty neat. i thought it was cool. So, yeah! He's looking good.
He? Is that a "he" skeleton? Wide... look at the wide pelvis it's hard to tell. Although, i guess if it was a female skeleton warrior, there would be, like, boob armour on it... knowing these fantasy artists... Okay, so the next step, they say, is to take an even lighter colour of your base coat, and do another dry brushing on top, trying to pick out the... the... protruberanciest (???) Awful. The... the most sticky-outy bits of the model, especially the ones that are on the... the top side, i guess to imitate - you know - light shining down on the top of the model, and picking out those highlights. That sounds like it's gonna be very, very challenging, but i've made it this far.
i'm not going to stop now. That's the first step that i've done that i'm not all that happy with. i feel like i goofed up a bit. The book said to use a darker piece of paper to blot out the dragon white colour because on a white paper towel, you're not gonna be able to see how much paint you have left on your brush. So i did that. i got a darker piece of paper. i you just used the back of the cardboard that came with the brushes, because i figured that was gonna be dark enough to see what was going on. So apparently, this wasn't cutting it, because i thought i would blot it out very nicely - you know - i was rubbing the brush until i could barely see the paint. Then when i got it on the model, it was very, very white. So you see, i have a huge pile of white right here on the top of his arm, and on this little extra skull that the archer has on his shoulder there?
i got it way too white. So i'm gonna actually go back and put more base coat on there, just to cover up what i perceive to be a goof-up. Maybe i have a little bit too much on the pelvis there? It's a pretty... it's a pretty shiny pelvis. And the kneecaps are glowing... i don't know. i'd... i feel like i've messed that up. So i'm just gonna do a couple touch-ups, and then we'll do the next step. Ok - there it is, fixed up a bit. i feel a little bit better than that. Still doesn't look quite as cool as the picture in the book, but - yeah, i can live with it. So the next steps, the book says, are to paint to all the other things. You know, step four: draw [BLEEP]ing owl. It tells me to start with the ground. And i'm gonna paint the bow, and then i'm gonna do the quiver, and the arrows, and there's pretty fine detail on those arrows, isn't there?
And it's just following the same techniques that they used to paint the bones with: you do the base colour, and then you do the darker wash, and then you do dry brush base colour, and then you do some highlights! So i'm gonna do all of those, and then, i think, the model will be almost finished.
And there you have it! All done! That is the first miniature i have ever painted in my entire life. i'll do a little 360 high-tech lathe shot for you so you can see how it turned out. And by now i'm sure you're wondering "Ryan... how on earth did you ever get into one of the worst art colleges in Canada?" A few parting thoughts i'll leave you with on the experience and how i found it: i felt that the wash step, where you've got your base coat on there, and then you're painting over a darker color and it muddies it all up and makes it all dirty looking... i felt that a little bit demoralizing, and in a couple of spots i didn't want to do it because i thought "Oh, it looks looks just fine with - you know - a base color. That's fine. i'll leave it like that."
But i persisted. i did the wash, against my better judgment, and you know what? i'm really glad i did! i'm really glad i went through all the trouble to do all the extra steps, rather than just put a base color on, because i think it looks way better! And one cool thing i didn't even notice that - especially with the bow, i thought "What's the point? It's just, like, a ramrod-straight bow. Nothing's gonna be interesting about that. Why am i bothering doing a wash on this?" And it wasn't until i did the darker color wash and then put highlights on it that i actually realized there's, like, a woodgrain texture on the bow, which i thought was really cool! All these little details that the sculptor put into the model don't really even show up, and you can't appreciate them, until you you put the trouble into painting them the... proper way? The time-consuming way?
i dunno. Sometimes, though, i did find that the wash was a little bit runny, and i wasn't quite careful enough with it, and it bled into areas that i already painted, down by the leg where the wash from the bow ran all over the the bone that i had already painted. You also have to be careful with brushes. They give you two brushes, like i said. They give you a flat one and a round one. And the flat one... i misread one of the instructions right off the bat, when i was supposed to be dry brushing, and i thought that i was supposed to stipple. DO NOT STIPPLE, cuz you'll wreck your brush like i just did, and now the bristles don't meet any more, so it's really hard to get that nice tight edge on the brush any more for when you're trying to do details. i feel like i kind of messed up this brush. And i feel pretty bad about it. The book's suggested technique of adding water to thin out the colours... it said to dip the end of the brush in the water and dab it in there to get a drop on there.
i found that the drops coming off the end of the brush weren't big enough to match the drop coming out of the paint bottle.Aand it DOES say "Make sure that the drop is big enough," but i found it took two and sometimes three hammers of the end of the brush to get a big enough drop water to match what was coming out of the bottle, so careful of that. And another point on water: i was using the water that i was using to clean the brushes, and the more i did that, the more i got dirty water of different pigments mixing with my paints. That's not a good plan. So ideally, you'd have two waters: you'd have your water for dabbing and cleaning your brushes in, and your separate water for thinning out your paints. And really, i think it would be handy to have that clean water and an eye dropper, so you can actually get actual drops out of it, maybe the same size as what's coming out of the paint bottle.
Some pigments i found in the paint pots were runnier than than others. i painted a little bit of dark brown accidentally on the arrows above the quiver, and i thought "Oh, it's no big deal because i'm gonna be painting over it with another colour." But the lighter brown was too thin to cover that up, so i had to do a couple of little fixes there. And the blue especially was... was much thinner than the other colours, so you have to watch that. If i had just thought "Oh, i'll paint the entire thing brown and thenl go in later with the blue and paint the fletching... feathery parts on the arrow (i forget what it's called) i would have been up a creek without a paddle, because the blue is too runny and watery to overpaint a colour like brown. So overall, figure painting is not for people with bad eyesight.
It's not for people with Parkinson's or arthritis in their hands. It's not for people prone to seizures, or people who have just had multiple cans of Dr. Pepper, like i have. It's not good for people who live on fault lines. BUT i can definitely see the appeal of it. Somebody told me it was relaxing? i think it is! i'd have a better time without the camera blocking my view, and without having to - you know - keep everything in shot. i think i may have caught the bug, and i think that this book and this product has given me enough confidence... i don't even know if i need to paint these two other figures that come with the kit, because i feel like i'm confident enough to go into my $30 Tiny Epic Quest game and paint those items... MAYBE my $80 Scythe game, and paint the minis?
Oh my gosh - look! My skeleton is doing the l... i don't know if you can see that... i don't have my overhead camera any more... He's limboing! He's leaning way back, and i wonder if that's because the paint warped the mini a little bit? i don't know what's going on with him. See if i can try to get him back into position. i don't know if i have the guts to paint the mini figures in my $400 7th Continent box. All prices Canadian, so take all that with a grain of salt. But definitely, some of the cheaper ones, i think that i got the guts to go in and do it, and it's all thanks to this handy little book. So it's a good product! i like it. i like it. Could use some red, but definitely, if you want to have confidence like i do to paint your minifigs, check it out!
Thanks for watching. Did you just watch that whole thing? Oh - hey! To 100% this video, click the badge to subscribe, and then click the bell to get notifications when i've got new stuff. [Music - Board Game Boogie by Ryan Henson Creighton]